Detectors electron-capture

Elimination of wet chemical sample preparation enables a complete analysis to be performed and data to be quickly analyzed. The detection limits are in the low part-per-million range using mass spectrometric detection. Alternatively, detection of compounds can be achieved by all common gas chromatography detectors (flame ionization detector, electron capture detector and flame photometric detector), and detection limits are determined by the method of detection employed. 

Match the detector with the items that follow thermal conductivity detector, flame ionization detector, electron capture detector, and mass spectrometer detector. 

The pesticides included in this study were fenvalerate, chlordecone (kepone), chlorothalonil, and chlorpyrifos. Fenvalerate is a synthetic pyrethroid insecticide used, for example, for mites on chickens. Its chemical name is cyano(3-phenoxyphenyl)-methyl 4-chloro-alpha-(1-methylethyl)benzeneacetate. Chlordecone is an insecticide, no longer used, and has a chemical name decachloro-octahydro-l,3,4-metheno-2H-cyclobuta(cd)=pentalen-2-one. Chlorothalonil is fungicide used on tomatoes whose chemical name is 2,4,5,6-tetrachloroisophthalonitrile. Chlorpyrifos is an insecticide with a chemical name 0,0-diethyl 0-(3,5,6-trichloro-2-pyridyl)phosphorothioate. Chlorpyrifos is the U. S. Food and Drug Administration chromatographic reference standard since numerous specific detectors (electron capture, flame photometric in both sulfur and phosphorus modes, alkali flame, nitrogen phosphorus, and Hall detectors) are sensitive to it. 

Other gas chromatography detectors electron capture halogens, conjugated C=0, —C=N, -N02 nitrogen-phosphorus highlights R N flame photometer individual selected elements, such as R S, Sn, Pb photoionization aromatics, unsaturated compounds... 

For the GC method, 0-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine can be detected by flame ionization detector, MS/SIM detector, electron-capture detector, or flame photometric detector. 1,2-Diaminobenzene derivatives of MG can be analyzed using a flame ionization detector, MS/SlM, or a specific nitrogen/phosphorus... 

The reference analysis methods of EPA are given as numbers— 502.2 and 524.2. The method 502.2 is analysis of VOCs in water using capillary gas chromatography-photoionization detector-electron capture detector (CGC-PID-ELCD) and 524.2 is the method for VOCs using CGC-MS [44]. 

The eluted components go to the detector of the gas chromatograph. The most commonly used detectors are thermal conductivity detector, flame ionization detector, electron capture detector, atomic emission detector, IR, ion trap detector, and MS. The detected components are processed by an integrator and appear on chart papers as a series of peaks on a time scale. The chart is called a gas chromatogram. 

Gas chromatography was applied, using selective detectors electron-capture detector for organochlorine compounds, and alkali flame-ionisation detector for organophosphorus compounds. We determined ... 

There are different types of detectors, including thermal conductivity and electron capture types. The most common detector is flame ionization variety (FID). A hydrogen flame is utilized to combust the column effluents. Thermal conductivity detectors do not degrade the effluents and are not as sensitive as flame ionization detectors. Electron capture detection is especially sensitive to halogenated compounds. 

The chromatogram can finally be used as the series of bands or zones of components or the components can be eluted successively and then detected by various means (e.g. thermal conductivity, flame ionization, electron capture detectors, or the bands can be examined chemically). If the detection is non-destructive, preparative scale chromatography can separate measurable and useful quantities of components. The final detection stage can be coupled to a mass spectrometer (GCMS) and to a computer for final identification. 

Schematic diagram of an electron capture detector for gas chromatography.

An electron capture detector is relatively insensitive to nonhalogenated compounds, providing the additional selectivity. 

Selectivity Because it combines separation with analysis, gas chromatography provides excellent selectivity. By adjusting conditions it is usually possible to design a separation such that the analytes elute by themselves. Additional selectivity can be provided by using a detector, such as the electron capture detector, that does not respond to all compounds. 

Graham, R. C. Robertson, J. K. Analysis of Trihalomethanes in Soft Drinks, /. Chem. Educ. 1988, 65, 735-737. Trihalomethanes are extracted from soft drinks using a liquid-liquid extraction with pentane. Samples are analyzed using a packed column containing 20% OV-101 on 80/100 mesh Gaschrom Q equipped with an electron capture detector. 

Sulfur hexafluoride may be analyzed chromatographicaHy using a molecular sieve or a Porapak QS column. Using an electron-capture detector, a sensitivity of 10 to lO " ppb is possible (51—53). 

Solvent extraction followed by gas chromatographic analysis is used to determine paraffin wax antioxidants (qv), ie, butylated hydroxyanisole and butylated hydroxytoluene and other volatile materials. Trace amounts of chlorinated organic compounds, eg, polychlorinated biphenyls, can be deterrnined by using a gas chromatograph with an electron-capture detector (22). 

Several gas-Hquid chromatographic procedures, using electron-capture detectors after suitable derivatization of the aminophenol isomers, have been cited for the deterrnination of impurities within products and their detection within environmental and wastewater samples (110,111). Modem high pressure Hquid chromatographic separation techniques employing fluorescence (112) and electrochemical (113) detectors in the 0.01 pg range have been described and should meet the needs of most analytical problems (114,115). 

Gas Chromatography. Gas chromatography is a technique utili2ed for separating volatile substances (or those that can be made volatile) between two phases, one of which is a gas. Purge-and-trap methods are frequently used for trace analysis. Various detectors have been employed in trace analysis, the most commonly used being flame ioni2ation and electron capture detectors. 

In hplc, detection and quantitation have been limited by availabiHty of detectors. Using a uv detector set at 254 nm, the lower limit of detection is 3.5 X 10 g/mL for a compound such as phenanthrene. A fluorescence detector can increase the detectabiHty to 8 x 10 g/mL. The same order of detectabiHty can be achieved using amperometric, electron-capture, or photoioni2ation detectors. 

For carrying out of given researches method of synthetic pyrethroids determination in air has been developed. Chromatographic behaviour is investigated and optimum conditions of the synthetic pyrethroids analysis with application of capillary column with stationary phase DB-5 and electron-capture detector are selected. 

The detector. The function of the detector, which is situated at the exit of the separation column, is to sense and measure the small amounts of the separated components present in the carrier gas stream leaving the column. The output from the detector is fed to a recorder which produces a pen-trace called a chromatogram (Fig. 9.1fr). The choice of detector will depend on factors such as the concentration level to be measured and the nature of the separated components. The detectors most widely used in gas chromatography are the thermal conductivity, flame-ionisation and electron-capture detectors, and a brief description of these will be given. For more detailed descriptions of these and other detectors more specialised texts should be consulted.67 69... 

Ionisation detectors. An important characteristic of the common carrier gases is that they behave as perfect insulators at normal temperatures and pressures. The increased conductivity due to the presence of a few charged molecules in the effluent from the column thus provides the high sensitivity which is a feature of the ionisation based detectors. Ionisation detectors in current use include the flame ionisation detector (FID), thermionic ionisation detector (TID), photoionisation detector (PID) and electron capture detector (ECD) each, of course, employing a different method to generate an ion current. The two most widely used ionisation detectors are, however, the FID and ECD and these are described below. 

Electron capture detector. Most ionisation detectors are based on measurement of the increase in current (above that due to the background ionisation of the carrier gas) which occurs when a more readily ionised molecule appears in the gas stream. The electron capture detector differs from other ionisation detectors in that it exploits the recombination phenomenon, being based on electron capture by compounds having an affinity for free electrons the detector thus measures a decrease rather than an increase in current. 

---