Computed technique

At present time is the acoustic emission laboratory of the Institute of Design already equipped with modem analysers processing 4 and 16 AE sensors (each enables to sense up to 256 levels). All analysers have at disposal powerful computing technique and corresponding software. 

The rapid development of the computer technique and the decreasing prices in spite of the increasing of performance have spread the use of personal computers (PCs) not only for industrial use but also for private use. Also, in spite of increasing requirements mea.surement and test systems become more and more economical, including NDT-systems. 

We have previously calculated conformational free energy differences for a well-suited model system, the catalytic subunit of cAMP-dependent protein kinase (cAPK), which is the best characterized member of the protein kinase family. It has been crystallized in three different conformations and our main focus was on how ligand binding shifts the equilibrium among these ([Helms and McCammon 1997]). As an example using state-of-the-art computational techniques, we summarize the main conclusions of this study and discuss a variety of methods that may be used to extend this study into the dynamic regime of protein domain motion. 

The study of slow protein dynamics is a fascinating field with still many unknowns. We have presented a number of computational techniques that are currently being used to tackle those questions. Most promising for our case seems the development of methods that combine an implicit solvent description with techniques to induce conformational transitions. 

A series of monographs and correlation tables exist for the interpretation of vibrational spectra [52-55]. However, the relationship of frequency characteristics and structural features is rather complicated and the number of known correlations between IR spectra and structures is very large. In many cases, it is almost impossible to analyze a molecular structure without the aid of computational techniques. Existing approaches are mainly based on the interpretation of vibrational spectra by mathematical models, rule sets, and decision trees or fuzzy logic approaches. 

The progression of sections leads the reader from the principles of quantum mechanics and several model problems which illustrate these principles and relate to chemical phenomena, through atomic and molecular orbitals, N-electron configurations, states, and term symbols, vibrational and rotational energy levels, photon-induced transitions among various levels, and eventually to computational techniques for treating chemical bonding and reactivity. 

This chapter is in no way meant to impart a thorough understanding of the theoretical principles on which computational techniques are based. There are many texts available on these subjects, a selection of which are listed in the bibliography. This book assumes that the reader is a chemist and has already taken introductory courses outlining these fundamental principles. This chapter presents the notation and terminology that will be used in the rest of the book. It will also serve as a reminder of a few key points of the theory upon which computation chemistry is based. 

The vibrational states of a molecule are observed experimentally via infrared and Raman spectroscopy. These techniques can help to determine molecular structure and environment. In order to gain such useful information, it is necessary to determine what vibrational motion corresponds to each peak in the spectrum. This assignment can be quite difficult due to the large number of closely spaced peaks possible even in fairly simple molecules. In order to aid in this assignment, many workers use computer simulations to calculate the vibrational frequencies of molecules. This chapter presents a brief description of the various computational techniques available. 

It is possible to use computational techniques to gain insight into the vibrational motion of molecules. There are a number of computational methods available that have varying degrees of accuracy. These methods can be powerful tools if the user is aware of their strengths and weaknesses. The user is advised to use ah initio or DFT calculations with an appropriate scale factor if at all possible. Anharmonic corrections should be considered only if very-high-accuracy results are necessary. Semiempirical and molecular mechanics methods should be tried cautiously when the molecular system prevents using the other methods mentioned. 

If you cannot specifically answer these questions, then you have not formulated a proper research project. The choice of computational methods must be based on a clear understanding of both the chemical system and the information to be computed. Thus, all projects start by answering these fundamental questions in full. The statement To see what computational techniques can do. is not a research project. However, it is a good reason to purchase this book. 

Quantitative energy values are one of the most useful results from computational techniques. In order to develop a reasonable energy expression when two... 

In principle, mesoscale methods can provide a means for connecting one type of simulation to another. For example, a molecular simulation can be used to describe a lipid. One can then derive the parameters for a lipid-lipid potential. These parameters can then be used in a simulation that combines lipids to form a membrane, which, in turn, can be used to compute parameters describing a membrane as a flexible sheet. Such parameters could be used for a simulation with many cells in order to obtain parameters that describe an organ, which could be used for a whole-body biological simulation. Each step, in theory, could be modeled in a different way using parameters derived not from experiment but from a more low-level form of simulation. This situation has not yet been realized, but it is representative of one trend in computational technique development. 

Organic molecules are the easiest to model and the easiest for which to obtain the most accurate results. This is so for a number of reasons. Since the amount of computational resources necessary to run an orbital-based calculation depends on the number of electrons, quantum mechanical calculations run fastest for compounds with few electrons. Organic molecules are also the most heavily studied and thus have the largest number of computational techniques available. 

The first step in designing a new compound is to find compounds that have even a slight amount of usefulness for the intended purpose. These are called lead compounds. Once such compounds are identified, the problem becomes one of refinement. Computational techniques are a fairly minor part of finding lead compounds. The use of computer-based techniques for lead compound identification is usually limited to searching databases for compounds similar to known lead compounds or known to treat diseases with similar causes or symptoms. 

Polymers will be elastic at temperatures that are above the glass-transition temperature and below the liquiflcation temperature. Elasticity is generally improved by the light cross linking of chains. This increases the liquiflcation temperature. It also keeps the material from being permanently deformed when stretched, which is due to chains sliding past one another. Computational techniques can be used to predict the glass-transition and liquiflcation temperatures as described below. 

Solids can be crystalline, molecular crystals, or amorphous. Molecular crystals are ordered solids with individual molecules still identihable in the crystal. There is some disparity in chemical research. This is because experimental molecular geometries most often come from the X-ray dilfraction of crystalline compounds, whereas the most well-developed computational techniques are for modeling gas-phase compounds. Meanwhile, the information many chemists are most worried about is the solution-phase behavior of a compound. 

These are software packages that have the ability to perform computations using several computational techniques. Most also have an integrated graphic user interface. 

We have chosen to cover a large number of topics, with an emphasis on when and how to apply computational techniques rather than focusing on theory. Each chapter gives a clear description with just the amount of technical depth typically necessary to be able to apply the techniques to computational problems. When possible, the chapter ends with a list of steps to be taken for difficult cases. 

Focuses on force field calculations for understanding the dynamic properties of proteins and nucleic acids. Provides a useful introduction to several computational techniques, including molecular mechanics minimization and molecular dynamics. Includes discussions of research involving structural changes and short time scale dynamics of these biomolecules, and the influence of solvent in these processes. 

Data processing. Once information is obtained with an appropriate data system, the information must be interpreted appropriately for the end use. Data processing involves the steps leading to this end use data processing does not necessarily imply application of modem computer techniques. 

Dual solvent fractional extraction (Fig. 7b) makes use of the selectivity of two solvents (A and B) with respect to consolute components C and D, as defined in equation 7. The two solvents enter the extractor at opposite ends of the cascade and the two consolute components enter at some point within the cascade. Solvent recovery is usually an important feature of dual solvent fractional extraction and provision may also be made for reflux of part of the product streams containing C or D. Simplified graphical and analytical procedures for calculation of stages for dual solvent extraction are available (5) for the cases where is constant and the two solvents A and B are not significantly miscible. In general, the accurate calculation of stages is time-consuming (28) but a computer technique has been developed (56). 

Adiabatic flame temperatures agree with values measured by optical techniques, when the combustion is essentially complete and when losses are known to be relatively small. Calculated temperatures and gas compositions are thus extremely useful and essential for assessing the combustion process and predicting the effects of variations in process parameters (4). Advances in computational techniques have made flame temperature and equifibrium gas composition calculations, and the prediction of thermodynamic properties, routine for any fuel-oxidizer system for which the enthalpies and heats of formation are available or can be estimated. 

Computer techniques are used for mine planning and design and for the optimum deployment of mining equipment. The effects of geology, haulage distances, minimum acceptable ore grade (cutoff grade), and by-product revenue are considered. 

Erom a technology perspective, knowledge-based systems (KBS) represent a new software methodology for solving certain types of problems effectively. It is important to understand what is encoded in knowledge-based systems, and how KBS technology differs from conventional numeric computational techniques. 

Adey, R. A., and C. A. Brebbia. Basic Computational Techniques for Engineeis, Wiley, New York (1983). 

---