Carbon dioxide catalytic

Investigation of carbon dioxide catalytic activation is explored by a variety of subdisciplines (homogeneous catalysis, heterogeneous catalysis, electrocatalysis/photoelectrocatalysis), often with little cross-citation of work. This situation created a need to bring together the leading researchers to provide an overview of methods and accomplishments to date. 

The complete assembly for carrying out the catalytic decomposition of acids into ketones is shown in Fig. Ill, 72, 1. The main part of the apparatus consists of a device for dropping the acid at constant rate into a combustion tube containing the catalyst (manganous oxide deposited upon pumice) and heated electrically to about 350° the reaction products are condensed by a double surface condenser and coUected in a flask (which may be cooled in ice, if necessary) a glass bubbler at the end of the apparatus indicates the rate of decomposition (evolution of carbon dioxide). The furnace may be a commercial cylindrical furnace, about 70 cm. in length, but it is excellent practice, and certainly very much cheaper, to construct it from simple materials. 

Besides chemical catalytic reduction of carbon dioxide with hydrogen, which is already possible in the laboratory, we are exploring a new approach to recycling carbon dioxide into methyl alcohol or related oxygenates via aqueous eleetrocatalytic reduction using what can be called a regenerative fuel cell system. The direct methanol fuel cell... 

Dehydration or Chemical Theory. In the dehydration or chemical theory, catalytic dehydration of ceUulose occurs. The decomposition path of ceUulose is altered so that flammable tars and gases are reduced and the amount of char is increased ie, upon combustion, ceUulose produces mainly carbon and water, rather than carbon dioxide and water. Because of catalytic dehydration, most fire-resistant cottons decompose at lower temperatures than do untreated cottons, eg, flame-resistant cottons decompose at 275—325°C compared with about 375°C for untreated cotton. Phosphoric acid and sulfuric acid [8014-95-7] are good examples of dehydrating agents that can act as efficient flame retardants (15—17). 

Other potential processes for production of formic acid that have been patented but not yet commerciali2ed include Hquid-phase oxidation (31) of methanol to methyl formate, and hydrogenation of carbon dioxide (32). The catalytic dehydrogenation of methanol to methyl formate (33) has not yet been adapted for formic acid production. 

Although catalytic hydration of ethylene oxide to maximize ethylene glycol production has been studied by a number of companies with numerous materials patented as catalysts, there has been no reported industrial manufacture of ethylene glycol via catalytic ethylene oxide hydrolysis. Studied catalysts include sulfonic acids, carboxyUc acids and salts, cation-exchange resins, acidic zeoHtes, haUdes, anion-exchange resins, metals, metal oxides, and metal salts (21—26). Carbon dioxide as a cocatalyst with many of the same materials has also received extensive study. 

A flame-ionization, total hydrocarbon analyzer determines the THC, and the total carbon content is calculated as methane. Other methods include catalytic combustion to carbon dioxide, which may be deterrnined by a sensitive infrared detector of the nondispersive type. Hydrocarbons other than methane and acetylene are present only in minute quantities and generally are inert in most appHcations. 

ZeoHte-based materials are extremely versatile uses include detergent manufacture, ion-exchange resins (ie, water softeners), catalytic appHcations in the petroleum industry, separation processes (ie, molecular sieves), and as an adsorbent for water, carbon dioxide, mercaptans, and hydrogen sulfide. 

Other components in the feed gas may react with and degrade the amine solution. Many of these latter reactions can be reversed by appHcation of heat, as in a reclaimer. Some reaction products cannot be reclaimed, however. Thus to keep the concentration of these materials at an acceptable level, the solution must be purged and fresh amine added periodically. The principal sources of degradation products are the reactions with carbon dioxide, carbonyl sulfide, and carbon disulfide. In refineries, sour gas streams from vacuum distillation or from fluidized catalytic cracking (FCC) units can contain oxygen or sulfur dioxide which form heat-stable salts with the amine solution (see Fluidization Petroleum). 

Catalytic Oxidization. A principal technology for control of exhaust gas pollutants is the catalyzed conversion of these substances into innocuous chemical species, such as water and carbon dioxide. This is typically a thermally activated process commonly called catalytic oxidation, and is a proven method for reducing VOC concentrations to the levels mandated by the CAAA (see Catalysis). Catalytic oxidation is also used for treatment of industrial exhausts containing halogenated compounds. 

Experience in air separation plant operations and other ciyogenic processing plants has shown that local freeze-out of impurities such as carbon dioxide can occur at concentrations well below the solubihty limit. For this reason, the carbon dioxide content of the feed gas sub-jec t to the minimum operating temperature is usually kept below 50 ppm. The amine process and the molecular sieve adsorption process are the most widely used methods for carbon dioxide removal. The amine process involves adsorption of the impurity by a lean aqueous organic amine solution. With sufficient amine recirculation rate, the carbon dioxide in the treated gas can be reduced to less than 25 ppm. Oxygen is removed by a catalytic reaction with hydrogen to form water. 

Catalytic Converter an air pollution abatement device that removes pollutants from motor vehicle exhaust either by oxidizing them into carbon dioxide and water or reducing them to nitrogen. A typical catalytic oxidizer for auto emission control is illustrated in the sidebar figure. 

The Catalytic Wet Air Oxidation (CWAO) process is capable of converting all organic contaminants ultimately to carbon dioxide and water, and can also remove oxidizable inorganic components such as cyanides and ammonia. The process uses air as the oxidant, which is mixed with the effluent and passed over a catalyst at elevated temperatures and pressures. If complete COD removal is not required, the air rate, temperature and pressure can be reduced, therefore reducing the operating cost. CWAO is particularly cost-effective for effluents that are highly concentrated... 

In catalytic incineration, organic contaminants are oxidized to carbon dioxide and water. A catalyst is used to initiate the combustion reaction, which occurs at a lower temperature than in thermal incineration. Catalytic incineration uses less fuel than the thermal method. Many commercial systems have removal efficiencies eater than 98%. 

The combination of ionic liquids with supercritical carbon dioxide is an attractive approach, as these solvents present complementary properties (volatility, polarity scale.). Compressed CO2 dissolves quite well in ionic liquid, but ionic liquids do not dissolve in CO2. It decreases the viscosity of ionic liquids, thus facilitating mass transfer during catalysis. The separation of the products in solvent-free form can be effective and the CO2 can be recycled by recompressing it back into the reactor. Continuous flow catalytic systems based on the combination of these two solvents have been reported [19]. This concept is developed in more detail in Section 5.4. 

Unlike carbon dioxide and water that are the inevitable by products of complete combustion of hydrocarbons, species such as carbon monoxide, ethene, toluene, and formaldehyde can be emitted because combustion has been interrupted before completion. Many factors lead to emissions from incomplete combustion. Emitted unburned hydrocarbons and carbon monoxide are regulated pollutants that must be eliminated. In automobiles with spark ignited engines, these emissions are almost entirely removed by the catalytic converter. 

Catalytic methanation is the reverse of the steam reforming reaction. Hydrogen reacts with carbon monoxide and carbon dioxide, converting them to methane. Methanation reactions are exothermic, and methane yield is favored at lower temperatures ... 

---