Etherate, boron trifluoride

InChl = l/C4H10O.BF3/cl-3-5-4-2 2-l(3)4/h3 H2,l-2H3 InChIKey = KZMGYPLQYOPHEL-UHFFFAOYAN (BEs.MeOH) 

Alternate Names boron trifluoride diethyl etherate boron trifluoride ethyl etherate boron trifluoride ethyl ether complex trifluoroboron diethyl etherate. 

Solubility sol benzene, chloromethanes, dioxane, ether, methanol, THF, toluene. 

Form Supplied in BF3-OEt2 light yellow hquid, packaged under nitrogen or argon BF3 -MeOH is avahable in solutions of 10-50% BF3 in MeOH. 

Preparative Methods BF3-OEt2 is prepared by passing BF3 through anhydrous ether the BF3-MeOH complex is formed fromBF3 OEt2 and methanol. 

---

Verify that the formal charges on boron and oxy gen in boron trifluoride etherate are correct... 

Polymer-type antioxidants have been prepared by Eriedel-Crafts reaction of -cresol andp- and/or y -chloromethylstyrene in the presence of boron trifluoride-etherate (198). The oligomeric product resulting from the alkylation of phenyl-a-naphthylamine using C12—15 propylene oligomer in the presence of AlCl or activated white clays is used as an antioxidant additive for lubricating oils (199). 

Reaction of 2-ethoxycarbonyl-l-phenylpyrazolidine with Meerwein s salt (boron trifluoride etherate) yields the quaternary ammonium salt (426) which is not stable and undergoes ring opening to the hydrazine (427) with sodium ethoxide (76JOC1244). 

The most important reaction with Lewis acids such as boron trifluoride etherate is polymerization (Scheme 30) (72MI50601). Other Lewis acids have been used SnCL, Bu 2A1C1, Bu sAl, Et2Zn, SO3, PFs, TiCU, AICI3, Pd(II) and Pt(II) salts. Trialkylaluminum, dialkylzinc and other alkyl metal initiators may partially hydrolyze to catalyze the polymerization by an anionic mechanism rather than the cationic one illustrated in Scheme 30. Cyclic dimers and trimers are often products of cationic polymerization reactions, and desulfurization of the monomer may occur. Polymerization of optically active thiiranes yields optically active polymers (75MI50600). 

Boron trifluoride etherate (in HOAc, 60-80°, 15 min, high yields) also catalyzes formation of 5-diphenylmethyl and 5-triphenylmethyl thioethers from aralkyl alcohols. 

The monothioacetal is also stable to 12 N hydrochloric acid in acetone (used to remove an TV-triphenylmethyl group) and to hydrazine hydrate in refluxing ethanol (used to cleave an A -phthaloyl group). It is cleaved by boron trifluoride etherate in acetic acid, silver nitrate in ethanol, and tiifluoroacetic acid. The monothioacetal is oxidized to a disulfide by thiocyanogen, (SCN)2- ... 

To a 3QQ-mL, round-bottomed flask fitted with a water separator, (Note 1) which contains 15 g of Linde 4A molecular sieve l/16-1nch pellets and Is filled with toluene, are added 7.3 g (0.04 mol) of cyclododecanone, 11.4 g (0.16 mol) of pyrrolidine, 100 mL of toluene, and 0.57 g (0.004 mol) of boron trifluoride etherate. The solution is heated under reflux for 20 hr. The water separator is replaced by a distillation head, and about 90 mL of the toluene is removed by distillation at atmospheric pressure. The residue containing l-(N-pyrrolidino)-l-cyclododecene (1) is used in the next step without further purification (Note 2). 

Boron trifluoride etherate Ethyl ether, compd. with boron fluoride (BF )... 

Kawakami, Suzuki and Yamashita showed that compound 7, among many others, could be polymerized to derivatives of the corresponding open-chained species by treatment with boron trifluoride ether complex. Yamashita and Kawakami formed these same sorts of materials by heating the glycols and paraformaldehyde in the presence of toluenesulfonic acid. This led to prepolymers which were then thermally depolymerized to afford the cyclic oligomers which were separated by fractional distillation. 

The successful labeling of the elusive 14a-position in cholestane represents a very important application of this reaction.It is known that hydroboration of the double bond in 5of-cholest-14-ene (174) occurs on the a-side. Consequently, by using deuteriodiborane (generated by the reaction of boron trifluoride etherate with lithium aluminum deuteride) and then propionic acid for hydrolysis of the alkylborane intermediate, 14a-d,-5a-cholestane (175) is obtained in 90% isotopic purity. This method also provides a facile route to the C-15 labeled analog (176) when the alkylborane derived from 5a-cholest-14-ene is hydrolyzed with propionic acid-OD. ... 

A suspension of lithium aluminum deuteride (1.6 g) in dry tetrahydrofuran (60 ml) is added dropwise to a stirred and cooled (with ice-salt bath) solution of 5a-androst-l4-ene-3j3,17j3-diol (179, 1.6 g) and boron trifluoride-etherate (13.3 g) in dry tetrahydrofuran (60 ml). The addition is carried out in a dry nitrogen atmosphere, over a period of 30 min. After an additional 30 min of cooling the stirring is continued at room temperature for 2 hr. The cooling is resumed in a dry ice-acetone bath and the excess deuteriodiborane is destroyed by the cautious addition of propionic acid. The tetrahydrofuran is then evaporated and the residue is dissolved in propionic acid and heated under reflux in a nitrogen atmosphere for 8 hr. After cooling, water is added and the product extracted with ether. The ether... 

In another example (170) the use of boron trifluoride-etherate proved particularly advantageous. 

The 12-ketone is generally less reactive than 3-, 6- and 7-ketones but more reactive than the 11-ketone. 12-Ethylene ketals are readily prepared by the usual procedures and the 12-ketone can be selectively ketalized in the presence of a 20-ketone bearing a 17a-hydrogen or 17a-hydroxyl substituent [(81)- (82)]. ° The procedure of choice for this reaction utihzes ethylene glycol and boron trifluoride-ether complex at room temperature. 

The dimethyl acetal (94) is readily prepared from the 22-aldehyde (93) by direct reaction with methanol in the presence of hydrogen chloride. Ena-mines (95) are formed without a catalyst even with the poorly reactive piperidine and morpholine.Enol acetates (96) are prepared by refluxing with acetic anhydride-sodium acetate or by exchange with isopropenyl acetate in pyridine.Reaction with acetic anhydride catalyzed by boron trifluoride-etherate or perchloric acid gives the aldehyde diacetate. 

Reaction of Epoxides with Boron Trifluoride-Etherate... 

The boron trifluoride-ether complex has been employed mainly in the opening of 5,6-epoxides. This reaction was first studied by Henbest and Wrigley and affords products depending on the nature and stereochemistry of the... 

The preparation of 16a,17a-methylene steroids (4) is best carried out by treatment of (2) with perchloric acid or boron trifluoride etherate. °° ° In this process the pyrazoline is introduced as a solid at room temperature into a solution of acetone containing a catalytic amount of the acid. The reaction requires 5 to 30 minutes for completion. 

Expulsion of nitrogen with formation of the A -l-methyl compound (9) occurs by heating (8) at ca. 220° or at room temperature by contact with acidic adsorbents. ° However, in this case perchloric acid or boron trifluoride etherate catalyzed fragmentation is not possible, although high yields (80 %) of (9) are obtained by heating (8) with quinoline or aniline. The la,2a-methylene compound (10) is always obtained as a by-product in 5% yield. 

High vacuum pyrolysis, heating in organic bases, contact with acidic adsorbents and reaction at room temperature with perchloric acid or boron trifluoride etherate cleaves the pyrazoline to give a 45-60% yield of the cyclopropane derivative (13) as well as 9 % of the unsaturated methyl compound (14). ° ... 

Spiro-pyrazoline derivatives (18) are obtained smoothly from 16-methy-lene-17-ketones (17). ° The sole products formed from (18) by pyrolysis or cleavage in the presence of boron trifluoride etherate, are the 16-spiro-cyclopropyl steroids (19). ... 

Boron trifluoride etherate in benzene converts A -20-acetoximinosteroids to the 17-ketones in somewhat lower yield, but the reaction of A -20-oximino steroids with this catalyst in the presence of acetic anhydride does not give the expected product two different compounds have been isolated and identified. ... 

If ethoxyacetylene is allowed to react in an anhydrous system with aliphatic ketones in the presence of boron trifluoride etherate, the unsaturated acid is obtained directly. This variation apparently has not yet been tried on steroids. 

A direct method for introduction of a C-21 acetoxyl group into a 20-keto-pregnane is by reaction with lead tetraacetate at room temperature. Although originally the reaction carried out in hot acetic acid gave low yields, a careful study by Henbest has defined conditions so that yields as high as 86 % can be obtained at room temperature. The preferred solvent is 5 % methanol in benzene, with boron trifluoride etherate as catalyst. With either methanol or benzene, the yield is less than 4%. 

Rj, R2 = O) by treatment with silver perchlorate in aqueous acetone or boron trifluoride etherate in formic acid at 0°. 

Bromo-4-methoxy-A-homo-estra-2,4,5(10)-trien-17-one (44 0. 2g), is dissolved in formic acid, 2 ml of boron trifluoride etherate is added and the mixture is stirred vigorously at 0° for 2 hr. A brown mass ca. 0.12 g) is obtained after evaporation of the solvents at reduced pressure. This material is diluted with water and extracted with chloroform. The chloroform extracts are washed successively with water and saturated salt solution, dried over anhydrous magnesium sulfate and evaporated at reduced pressure to give 95 mg of a product which is purified by filtration through a column of neutral alumina and crystallization of the residue after evaporation of the solvent from ethyl acetate-petroleum ether. The resulting A-homo-estra-l(10),2,4a-triene-4,17-dione (45), mp 143-146°, is identical to the tropone (45) prepared from monoadduct 17-ketone (43a). 

B-Homosteroids have also been prepared by acid-catalyzed reaction of diazomethane with a,/5-unsaturated ketones. 3/ -Hydroxycholest-5-en-7-one acetate (57) reacts with diazomethane in the presence of concentrated fluoroboric acid, boron trifluoride etherate or aluminum chloride to give 3yS-hydroxy-B-homo-cholest-5-en-7a-one acetate (67). The 7a-keto group is reported to be chemically less reactive than an 11-keto group. 

In the course of synthetic efforts aimed at obtaining 6j5-fluoro steroids, Kirk and Petrow treated a 3)5-acetoxy-6-raethyl-5a,6a-epoxide with boron trifluoride etherate and unexpectedly obtained a fluorine-free acetoxy ketone." Later transformations established that the product was the A-homo-B-norsteroid (104). 

Toasolution of cesium fluoroxysiilfate(I mmol)m 1.5 mLof dried acetonitrile IS added 1 mmol of boron trifluoride etherate with stirring at room temperature. Acetanilide (1 mmol) dissolved in 0.5 mL ot acetonitrile is added, and the mixture is stirred at room temperature for 30 min. Methylene chloride (10 mL) is added. 

The reactions of some fluorinated ethers may result in the elimination of alkyl fluorides In the case of 2-methoxyperfluoro-2-butene, treatment with antimony pentafluoride gives perfluoro-3-buten-2-one and methylfluoride [107] By reacting 2-chloro-l,l,2-trifluorodiethyl ether with boron trifluoride etherate or with aluminum chloride, chlorofluoroacetyl fluoride can be obtained with the elimination of ethyl fluonde [108] (equations 76 and 77)... 

Covalent fluondes of group 3 and group 5 elements (boron, tin, phosphorus, antimony, etc ) are widely used m organic synthesis as strong Lewis acids Boron trifluoride etherate is one of the most common reagents used to catalyze many organic reactions. A representative example is its recent application as a catalyst in the cycloadditions of 2-aza-l,3-dienes with different dienophiles [14] Boron trifluoride etherate and other fluonnated Lewis acids are effective activators of the... 

---