Ethers boron trifluoride etherate

Boron trifluoride Diethyl ether Boron trifluoride etherate ... 

Thallation of phenol ethers/ Boron trifluoride etherate is added to a dichloroethane... 

METHYL ETHERS Boron trifluoride etherate-Ethanediol. 

Nitromethyl ketones react with p-toluenesulfonic acid (PTSA) in refluxing toluene to give the corresponding furo-xans in 97% yield [20]. When refluxed several hours in xylene or mesitylene in the presence of dipolarophiles and catalytic PTSA, not only activated nitro compounds but also phenylnitromethane and 1-nitropropane afforded the expected isoxazole derivatives, as a result of nitrile oxide cycloadditions [21]. Microwave irradiation in the presence of catalytic PTSA has been successfully applied to condensations between methyl nitroacetate and dipolarophiles [22]. Nitroacetic esters have been converted into the corresponding furoxans with cold sulfuric acid [23], while phenylnitromethane and phenylacetylene in ethereal boron trifluoride etherate are reported to give 3,5-diphenylisoxazole [24]. 

The covalently bonded oxygen atom still has two lone pairs of electrons and can act as an electron pair donor. It rarely donates both pairs (to achieve 4-coordination) and usually only one donor bond is formed. A water molecule, for example, can donate to a proton, forming H30, and diethyl ether can donate to an acceptor such as boron trifluoride ... 

Verify that the formal charges on boron and oxy gen in boron trifluoride etherate are correct... 

Aqueous mineral acids react with BF to yield the hydrates of BF or the hydroxyfluoroboric acids, fluoroboric acid, or boric acid. Solution in aqueous alkali gives the soluble salts of the hydroxyfluoroboric acids, fluoroboric acids, or boric acid. Boron trifluoride, slightly soluble in many organic solvents including saturated hydrocarbons (qv), halogenated hydrocarbons, and aromatic compounds, easily polymerizes unsaturated compounds such as butylenes (qv), styrene (qv), or vinyl esters, as well as easily cleaved cycHc molecules such as tetrahydrofuran (see Furan derivatives). Other molecules containing electron-donating atoms such as O, S, N, P, etc, eg, alcohols, acids, amines, phosphines, and ethers, may dissolve BF to produce soluble adducts. 

Polymer-type antioxidants have been prepared by Eriedel-Crafts reaction of -cresol andp- and/or y -chloromethylstyrene in the presence of boron trifluoride-etherate (198). The oligomeric product resulting from the alkylation of phenyl-a-naphthylamine using C12—15 propylene oligomer in the presence of AlCl or activated white clays is used as an antioxidant additive for lubricating oils (199). 

Friedel-Crafts (Lewis) acids have been shown to be much more effective in the initiation of cationic polymerization when in the presence of a cocatalyst such as water, alkyl haUdes, and protic acids. Virtually all feedstocks used in the synthesis of hydrocarbon resins contain at least traces of water, which serves as a cocatalyst. The accepted mechanism for the activation of boron trifluoride in the presence of water is shown in equation 1 (10). Other Lewis acids are activated by similar mechanisms. In a more general sense, water may be replaced by any appropriate electron-donating species (eg, ether, alcohol, alkyl haUde) to generate a cationic intermediate and a Lewis acid complex counterion. 

Examination of possible systems for boron isotope separation resulted in the selection of the multistage exchange-distillation of boron trifluoride—dimethyl ether complex, BF3 -0(CH3 )2, as a method for B production (21,22). Isotope fractionation in this process is achieved by the distillation of the complex at reduced pressure, ie, 20 kPa (150 torr), in a tapered cascade of multiplate columns. Although the process involves reflux by evaporation and condensation, the isotope separation is a result of exchange between the Hquid and gaseous phases. 

The first synthesis of sorbic acid was from crotonaldehyde [4170-30-3] and malonic acid [141-82-2] in pyridine in 32% yield (2,17,18)- The yield can be improved with the use of malonic acid salts (19). One of the first commercial methods involved the reaction of ketene and crotonaldehyde in the presence of boron trifluoride in ether at 0°C (20,21). A P-lactone (4) forms and then reacts with acid, giving a 70% yield. 

Methane sulfonic acid, trifluoroacetic acid, hydrogen iodide, and other Brmnsted acids can faciUtate 3 -acetoxy displacement (87,173). Displacement yields can also be enhanced by the addition of inorganic salts such as potassium thiocyanate and potassium iodide (174). Because initial displacement of the acetoxy by the added salt does not appear to occur, the role of these added salts is not clear. Under nonaqueous conditions, boron trifluoride complexes of ethers, alcohols, and acids also faciUtate displacement (87,175). 

Catalytic curing agents initiate resin homopolymerization, either cationic or anionic, as a consequence of using a Lewis acid or base in the curing process. The Lewis acid catalysts frequently employed are complexes of boron trifluoride with amines or ethers. 

Alkyl tertiary alkyl ethers can be prepared by the addition of an alcohol or phenol to a tertiary olefin under acid catalysis (Reycler reaction) sulfuric acid, phosphoric acid, hydrochloric acid, and boron trifluoride have all been used as catalysts ... 

Reaction of 2-ethoxycarbonyl-l-phenylpyrazolidine with Meerwein s salt (boron trifluoride etherate) yields the quaternary ammonium salt (426) which is not stable and undergoes ring opening to the hydrazine (427) with sodium ethoxide (76JOC1244). 

The most important reaction with Lewis acids such as boron trifluoride etherate is polymerization (Scheme 30) (72MI50601). Other Lewis acids have been used SnCL, Bu 2A1C1, Bu sAl, Et2Zn, SO3, PFs, TiCU, AICI3, Pd(II) and Pt(II) salts. Trialkylaluminum, dialkylzinc and other alkyl metal initiators may partially hydrolyze to catalyze the polymerization by an anionic mechanism rather than the cationic one illustrated in Scheme 30. Cyclic dimers and trimers are often products of cationic polymerization reactions, and desulfurization of the monomer may occur. Polymerization of optically active thiiranes yields optically active polymers (75MI50600). 

Boron trifluoride etherate (in HOAc, 60-80°, 15 min, high yields) also catalyzes formation of 5-diphenylmethyl and 5-triphenylmethyl thioethers from aralkyl alcohols. 

The monothioacetal is also stable to 12 N hydrochloric acid in acetone (used to remove an TV-triphenylmethyl group) and to hydrazine hydrate in refluxing ethanol (used to cleave an A -phthaloyl group). It is cleaved by boron trifluoride etherate in acetic acid, silver nitrate in ethanol, and tiifluoroacetic acid. The monothioacetal is oxidized to a disulfide by thiocyanogen, (SCN)2- ... 

To a 3QQ-mL, round-bottomed flask fitted with a water separator, (Note 1) which contains 15 g of Linde 4A molecular sieve l/16-1nch pellets and Is filled with toluene, are added 7.3 g (0.04 mol) of cyclododecanone, 11.4 g (0.16 mol) of pyrrolidine, 100 mL of toluene, and 0.57 g (0.004 mol) of boron trifluoride etherate. The solution is heated under reflux for 20 hr. The water separator is replaced by a distillation head, and about 90 mL of the toluene is removed by distillation at atmospheric pressure. The residue containing l-(N-pyrrolidino)-l-cyclododecene (1) is used in the next step without further purification (Note 2). 

Boron trifluoride etherate Ethyl ether, compd. with boron fluoride (BF )... 

Boron trifluoride diethyl etherate [109-63-7] M 141.9, b 67°/43mm, b 126°/760mm, d 1.154, n 1.340. Treated with a small quantity of diethyl ether (to remove an excess of this component), and then distd under reduced pressure, from CaH2. Fumes in moist air. TOXIC. 

Since 1900 other methods have been devised for producing polymethylene , including the use of boron trifluoride-diethyl ether catalysts at 0°C. Some of these methods give unbranched linear polymers, often of very high molecular weight, which are useful for comparing commercial polyethylenes which have molecules that are branched to varying extents. 

The patent literature indicates that polymerisation may be carried out in the range -80 to -i-25°C using boron trifluoride or its ethereate as catalyst. 

BORON TRIFLUORIDE COMPOUND uith METHYL ETHER (1 1) see BORON ... 

Boron Trifluoride Compound with Methyl Ether (1 1) e 1 1,000 ... 

Kawakami, Suzuki and Yamashita showed that compound 7, among many others, could be polymerized to derivatives of the corresponding open-chained species by treatment with boron trifluoride ether complex. Yamashita and Kawakami formed these same sorts of materials by heating the glycols and paraformaldehyde in the presence of toluenesulfonic acid. This led to prepolymers which were then thermally depolymerized to afford the cyclic oligomers which were separated by fractional distillation. 

Most of the compounds in this class have been prepared from preexisting crown ether units. By far, the most common approach is to use a benzo-substituted crown and an electrophilic condensation polymerization. A patent issued to Takekoshi, Scotia and Webb (General Electric) in 1974 which covered the formation of glyoxal and chloral type copolymers with dibenzo-18-crown-6. The latter were prepared by stirring the crown with an equivalent of chloral in chloroform solution. Boron trifluoride was catalyst in this reaction. The polymer which resulted was obtained in about 95% yield. The reaction is illustrated in Eq. (6.22). 

The successful labeling of the elusive 14a-position in cholestane represents a very important application of this reaction.It is known that hydroboration of the double bond in 5of-cholest-14-ene (174) occurs on the a-side. Consequently, by using deuteriodiborane (generated by the reaction of boron trifluoride etherate with lithium aluminum deuteride) and then propionic acid for hydrolysis of the alkylborane intermediate, 14a-d,-5a-cholestane (175) is obtained in 90% isotopic purity. This method also provides a facile route to the C-15 labeled analog (176) when the alkylborane derived from 5a-cholest-14-ene is hydrolyzed with propionic acid-OD. ... 

A suspension of lithium aluminum deuteride (1.6 g) in dry tetrahydrofuran (60 ml) is added dropwise to a stirred and cooled (with ice-salt bath) solution of 5a-androst-l4-ene-3j3,17j3-diol (179, 1.6 g) and boron trifluoride-etherate (13.3 g) in dry tetrahydrofuran (60 ml). The addition is carried out in a dry nitrogen atmosphere, over a period of 30 min. After an additional 30 min of cooling the stirring is continued at room temperature for 2 hr. The cooling is resumed in a dry ice-acetone bath and the excess deuteriodiborane is destroyed by the cautious addition of propionic acid. The tetrahydrofuran is then evaporated and the residue is dissolved in propionic acid and heated under reflux in a nitrogen atmosphere for 8 hr. After cooling, water is added and the product extracted with ether. The ether... 

In another example (170) the use of boron trifluoride-etherate proved particularly advantageous. 

The 12-ketone is generally less reactive than 3-, 6- and 7-ketones but more reactive than the 11-ketone. 12-Ethylene ketals are readily prepared by the usual procedures and the 12-ketone can be selectively ketalized in the presence of a 20-ketone bearing a 17a-hydrogen or 17a-hydroxyl substituent [(81)- (82)]. ° The procedure of choice for this reaction utihzes ethylene glycol and boron trifluoride-ether complex at room temperature. 

The dimethyl acetal (94) is readily prepared from the 22-aldehyde (93) by direct reaction with methanol in the presence of hydrogen chloride. Ena-mines (95) are formed without a catalyst even with the poorly reactive piperidine and morpholine.Enol acetates (96) are prepared by refluxing with acetic anhydride-sodium acetate or by exchange with isopropenyl acetate in pyridine.Reaction with acetic anhydride catalyzed by boron trifluoride-etherate or perchloric acid gives the aldehyde diacetate. 

---