Alkyd resins composition

Table 4. Fatty Acid Compositions, Wt %, of Fats and Oils Commonly Used in Alkyd Resins...

The polyester alkyd moulding compositions are also based on a resin similar to those used for laminating. They are prepared by blending the resin with cellulose pulp, mineral filler, lubricants, pigments and peroxide curing agents on... 

The alkyd moulding compositions are used almost entirely in electrical applications where the cheaper phenolic and amino-resins are unsuitable. 

Nitrile rubber is compatible with phenol-formaldehyde resins, resorcinol-formaldehyde resins, vinyl chloride resins, alkyd resins, coumarone-indene resins, chlorinated rubber, epoxies and other resins, forming compositions which can be cured providing excellent adhesives of high strength, high oil resistance and high resilience. On the other hand, NBR adhesives are compatible with polar adherends such as fibres, textiles, paper and wood. Specific formulations of NBR adhesives can be found in [12]. 

By depolymerizing PET waste with a polyol and subsequently condensing the oligomeric product with a polycarboxylic acid or anhydride, polyester resins are produced which have wide industrial applications. Depending on the polyol and polycarboxylic acid or anhydride used, saturated resins, alkyd resins, or unsaturated resins are obtained. PET wastes have been used for the production of alkyd resins in water thinnable paints. The materials obtained from the reaction of PET with a mixture of fatty acids high in linoleic acid content and trimethylolethane have been used in the preparation of water-dispersible coatings. Products of the depolymerization of PET with trimethylolpropane and pentaerythritol are used in the manufacture of high-solids paints. In the first step, PET is depolymerized with trimethylopropane and pentaerythritol at temperatures of 230-240°C. The final paint compositions contain 30-50% of PET depolymerization products.12... 

Other examples of alkyd resins with variations in binder compositions across the different colours have been found in samples from a painting by Jackson Pollock analysed with Py-GC/MS and on-line TMAH derivatization [91]. 

The glyptals made from phthalic anhydride and glycerol were developed as compositions for use in paints and varnishes. If the reaction was carried out too long the product became intractible. But under milder conditions, other products could be obtained which could be used in making soluble products and then they could be set further after forming. It was learned that by modifying the reaction mixture with some monobasic acid to balance the hydroxyls and carboxyls in the reaction mixture, more soluble products could be obtained. Kienle of General Electric, was one of the early developers of these products. Later many other alkyd resins from other polyhydroxyl compounds and poly acids were produced for technical use. 

Uses. In the manufacture of pentaerythritol tetranitrate alkyd resins in surface-coating compositions pentaerythritol triacrylate and protective coatings insecticides pharmaceuticals... 

Adipic acid [124-04-9] - [ALKYD RESINS] (Vol 2) - [DICARBOXYLIC ACIDS] (Vol 8) - [FOOD ADDITIVES] (Vol 11) - (ELECTROCHEMICALPROCESSDTG - ORGANIC] (Vol 9) -barrier polymers from [BARRIERPOLYMERS] (Vol 3) -from cyclohexane [HYDROCARBONS - C1-C6] (Vol 13) -from cyclohexane [HYDROCARBON OXIDATION] (Vol 13) -from cyclohexanol [CYCLOHEXANOL AND CYCLOHEXANONE] (Vol 7) -as food additive [FOOD ADDITIVES] (Vol 11) -nylon from [POLYAMIDES - FIBERS] (Vol 19) -nylon-6,6 from [POLYAMIDES - GENERAL] (Vol 19) -nylon-6,6 from [POLYAMIDES - PLASTICS] (Vol 19) -m polyester production [COMPOSITE MATERIALS - POLYMER-MATRIX - THERMOSETS] (Vol 7) -m polyester resins [POLYESTERS, UNSATURATED] (Vol 19) -soda preservatives [CARBONATED BEVERAGES] (Vol 5)... 

Both aqueous polymer-based systems (latex), made by emulsion or dispersion polymerization, and oil-modified alkyd resin-based systems are still in wide use [781], Table 12.2 shows the composition of a typical water-based emulsion paint. There is a wide variety of coatings, ranging from broad applicability to highly specialized, including latexes, amino resins, isocyanates, epoxy resins, acrylic resins, polyester... 

The time that is required to produce a homogeneous suspension of particles in the dispersion medium using an oscillatory shaking machine equipped with several containers is measured. Not only can small quantities of the millbase with the same composition be tested (as with other types of apparatus), but various millbases can also be tested under the same conditions. A low-viscosity alkyd resin system of the stoving or oxidatively drying type can be used as a test medium. For standards, see Table 1.1 ( Ease of dispersion Oscillatory shaking machine ). 

Westlane Plastics (USA) [45] uses an extrusion method to produce rods of up to 31.75 mm diameter, stri K, pipes with 9.52-12.7 mm wall thickness and other profile artides from compositions based on phenol, melamine, carbamide, and alkyd resins. Fillers used incluse wood crush, cellulose, chalk, talc, clay, mica, silica, coke, graphite, and carbon fibers. 

Monobasic Acids. The overwhelming majority of monobasic acids used in alkyd resins are long-chain fatty acids of namral occurrence. They may be used in the form of oil or free fatty acids. Free fatty acids are usually available and classified by their origin, viz., soy fatty acids, linseed fatty acids, coconut fatty acids, etc. The fatty acid composition of various types of fats and oils that are commonly used in alkyd resins are given in Table 2. 

Use Water-soluble lubricants solvents for dyes, resins, proteins plasticizers for casein and gelatin compositions, glues, zein, cork, and special printing inks solvent and ointment bases for cosmetics and pharmaceuticals intermediates for nonionic surfactants and alkyd resins. 

Use Alkyd resins and modified phenolic compositions for paints and varnishes, intermediate for dyestuffs and printing ink. 

---