Water-soluble lubricant

Typical commercial ethoxylated sorbitan fatty acid esters are yellow Hquids, except tristearates and the 4- and 5-mol ethylene oxide adducts which are light tan soHds. These adducts, as well as the 20-mol adducts of the triesters, are insoluble but dispersible in water. The monoester 20-mol adducts are water soluble. Ethoxylated sorbitan esters are widely used as emulsifiers, antistatic agents, softeners, fiber lubricants, and solubilizers. In combination with the unethoxylated sorbitan esters or with mono- or diglycetides, these are often used as co-emulsrfiers. The ethoxylated sorbitan esters are produced by beating sorbitan esters with ethylene oxide at 130—170°C in the presence of alkaline catalysts. 

Natural Ethoxylated Fats, Oils, and Waxes. Castor oil (qv) is a triglyceride high in ticinoleic esters. Ethoxylation in the presence of an alkaline catalyst to a polyoxyethylene content of 60—70 wt % yields water-soluble surfactants (Table 20). Because alkaline catalysts also effect transestenfication, ethoxylated castor oil surfactants are complex mixtures with components resulting from transesterrfication and subsequent ethoxylation at the available hydroxyl groups. The ethoxylates are pale amber Hquids of specific gravity just above 1.0 at room temperature. They are hydrophilic emulsifiers, dispersants, lubricants, and solubilizers used as textile additives and finishing agents, as well as in paper (qv) and leather (qv) manufacture. 

In the lightening of petroleum hydrocarbon oil, esters of mercaptocarboxyhc acids can modify radical behavior during the distillation step (58). Thioesters of dialkanol and trialkanolamine have been found to be effective multihinctional antiwear additives for lubricants and fuels (59). Alkanolamine salts of dithiodipropionic acid [1119-62-6] are available as water-soluble extreme pressure additives in lubricants (60). 

The fabric is desized after the weaving operation and then passed through a heated water bath to remove all the size. The rate at which this operation can be accompHshed depends to a great degree on solubiUty rate of the poly(vinyl alcohol). Difficulties encountered in completely removing the lubricating wax, usually tallow wax, has led to the development of several wax-free size compositions (303—311). The main component contained in these blends is PVA in combination with a small amount of a synthetic water-soluble lubricant. 

Diesters. Many of the diester derivatives are commercially important. The diesters are important plasticizers, polymer intermediates, and synthetic lubricants. The diesters of azelaic and sebacic acids are useflil as monomeric plasticizing agents these perform weU at low temperatures and are less water-soluble and less volatile than are diesters of adipic acid. Azelate diesters, eg, di- -hexyl, di(2-ethylhexyl), and dibutyl, are useflil plasticizing agents for poly(vinyl chloride), synthetic mbbers, nitroceUulose, and other derivatized ceUuloses (104). The di-hexyl azelates and dibutyl sebacate are sanctioned by the U.S. Food and Dmg Administration for use in poly(vinyl chloride) films and in other plastics with direct contact to food. The di(2-ethylhexyl) and dibenzyl sebacates are also valuable plasticizers. Monomeric plasticizers have also been prepared from other diacids, notably dodecanedioic, brassyflc, and 8-eth5lhexadecanedioic (88), but these have not enjoyed the commercialization of the sebacic and azelaic diesters. 

These are true chemical solutions and are mixtures of soluble polyglycols (to give lubricity), corrosion inhibitors and water soluble extreme pressure additives. They are subject to attack by micro-organisms and as a consequence, they are often formulated with one or more preservatives. 

Compared with wool and cotton, the scouring procedures for synthetic fibres are relatively simple since these fibres contain fewer impurities. Most of these have at least some degree of water solubility the most important are sizes and lubricants. The major sizes used are poly (vinyl alcohol), carboxymethylcellulose and poly (acrylic acid), all of which are completely or partially water-soluble. Sometimes aliphatic polyesters are used. 

Alkoxylated polysiloxanes are a relatively new class of dyebath lubricants. They have practically no substantivity for the substrate, yet combine adequate lubrication with water solubility and easy rinsability. If the silicones contain primary hydroxy groups, these can be modified by esterification, phosphation, phosphonation, sulphation, sulphonation or carboxylation. These anionic substituents confer substantivity for various substrates without losing rinsability. Anionic organic sulphates and sulphonates probably offer the best overall properties for dyebath lubricants, whilst other types can be more suitable for selected applications [464]. 

Ointments are semisolid preparations that are intended for external use. Ointments may contain either finely powdered drugs or their mixtures, liquids, and other drug forms incorporated into appropriate bases. They are applied to the skin for their physical effects as emollients (which make the skin more pliable), protectants, lubricants, and drying agents. Ointment bases are also used as vehicles in which to incorporate topical medications which exert specific effect. There are four types of ointment bases, namely, oleaginous, absorption, water removable, and water soluble bases. 

Examples of such effects are the SubChem cases for the substitution of DEHP as a plasticiser in PVC by other phthalates (instead of switching over to underbody hard shells), optimisation of formulations in water-soluble cooling lubricants (instead of switching over to minimum quantity lubrication) or the use of water-based flexographic inks (instead of switching over to UV-drying printing inks). 

Calcium hydroxide has wide industrial applications. It is used to make cement, mortar, plaster, and other building materials. It also is used in water soluble paints, and for fireproofing coatings and lubricants. Other applications are in the manufacture of paper pulp as a preservative for egg in vulcanization of rubber as a depilatory for hides and in preparation of many calcium salts. 

---