Adherence specificity

There is still some discordance about markers for ATI cells [17, 18]. Varieties of glycocalyx appear to be expressed in ATI versus ATII cells, which can be distinguished by the binding of specific lectins. Lycopersicon esculen-tum lectin, for example, appears to adhere specifically to the apical plasma membrane of ATI cells [19, 20], Other lectin markers that have been reported in AEC typing are Ricinus communis agglutinin, Erythrina cristagalli lectin, soybean lectin and Bauhinia purpurea agglutinin (all for the ATI phenotype),... 

A CNS drug does not have to adhere specifically to only one of these methods of synaptic modifica-... 

The capacity of pathogenic bacteria to adhere to mucosal membranes has been exploited in the modification of new mucoadhesive polymers. The ability of bacteria to adhere to a specific target is rooted from particular cell-surface components or appendages, known as fimbriae, which promote adhesion to other cells or inanimate surfaces. Fimbriae are extracellular, long thread-like protein polymers of bacteria that play a major role in many diseases. It has been reported that Escherichia coli adheres specifically to the lymphoid follicle epithelium of the ileal Peyer s patch in rabbits. Similarly, different staphylococci possess the ability to adhere specifically to the surface of mucus gel layers and not mucus-free surfaces. Thus, polymers have been modified by the attachment of these fimbriae to enhance mucoadhesion. An attachment protein derived from E. coli, K99-fimbriae, has been covalently attached to polyacrylic acid networks in an attempt to provide a novel polymer with enhanced adhesive properties (Figure 52.7). ... 

Mac-1. Mac-1 is a dimerized protein eonsisting of CDllb and CD18, whose function is to enable leukoeytes to adhere specifically to other cells expressing its counter ligand and to eollagen. 

Zieler H, Nawrocki JP, Shahabuddin M (1999) Plasmodium gallinaceum ookinetes adhere specifically to the midgut epithelium of Aedes aegypti by interaction with a carbohydrate ligand. J Exp Biol 202 (Pt 5) 485-95. 

Governmental specifications. In France, they are published through inter-ministerial directives and are prepared at the Ministry of Industry by the DHYCA (Direction des Hydrocarbures et des Carburants). They govern the characteristics that products must adhere to in all French territories. 

The interest in vesicles as models for cell biomembranes has led to much work on the interactions within and between lipid layers. The primary contributions to vesicle stability and curvature include those familiar to us already, the electrostatic interactions between charged head groups (Chapter V) and the van der Waals interaction between layers (Chapter VI). An additional force due to thermal fluctuations in membranes produces a steric repulsion between membranes known as the Helfrich or undulation interaction. This force has been quantified by Sackmann and co-workers using reflection interference contrast microscopy to monitor vesicles weakly adhering to a solid substrate [78]. Membrane fluctuation forces may influence the interactions between proteins embedded in them [79]. Finally, in balance with these forces, bending elasticity helps determine shape transitions [80], interactions between inclusions [81], aggregation of membrane junctions [82], and unbinding of pinched membranes [83]. Specific interactions between membrane embedded receptors add an additional complication to biomembrane behavior. These have been stud-... 

Quality Control. Because fine chemicals are sold according to specifications, adherence to constant and strict specifications, at risk because of the batchwise production and the use of the same equipment for different products ia multipurpose plants, is a necessity for fine chemical companies. For the majority of the fine chemicals, the degree of attention devoted to quahty control (qv) is not at the discretion of the iadividual company. This is particularly the case for fine chemicals used as active iagredients ia dmgs and foodstuffs (see Fine chemicals, standards). Standards for dmgs are pubHshed ia the United States Pharmacopeia (USP) ia the United States (6) and the European Pharmacopeia ia Europe (7). 

Spices are natural agricultural products and exhibit a range of variations of many specific characteristics. The most important quaUty assessment is the subjective physical observation of the whole or ground spice by an expert. The macroscopic and microscopic examination of spice is the criterion for the continued analysis of the product to determine adherance to specifications. 

Single-ply membranes offer the widest range of systems in the roofing industry. The three basic systems are ballasted, fuUy adhered, and mechanically fastened. From a cost standpoint, the fuUy adhered system is the most expensive to install, the ballasted system the least. The protected-membrane roofing system can be used with any of the basic systems. The specifications for these systems are pubHshed by the various manufacturers. The following gives a brief description of the roof assembhes. 

Fleece-Back Sheet. A fleece-back sheet is a nonreinforced polymeric membrane that has had a nonwoven mat made of polyester, weighing 101.7—203.4 g/m, laminated to the back of the sheet. The prime use of the fleece-back sheet is in the fully adhered roofing systems. The fleece provides the chemical separator, which eliminates the need for an adhesive that is compatible with the specific membrane or a compatible substrate. 

Strontium hydroxide, Sr(OH)2, resembles slaked lime but is more soluble in water (21.83 g per 100 g of water at 100°C). It is a white dehquescent sohd with a specific gravity of 3.62 and a melting point of 375°C. Strontium soaps are made by combining strontium hydroxide with soap stocks, eg, lard, tallow, or peanut oil. The strontium soaps are used to make strontium greases, which are lubricants that adhere to metallic surfaces at high loads and are water-resistant, chemically and physically stable, and resistant to thermal breakdown over a wide temperature range (11). 

Many grades of interlayer are produced to meet specific length, width, adhesion, stiffness, surface roughness, color (93,94), and other requirements of the laminator and end use. Sheet can be suppHed with vinyl alcohol content from 15 to about 23 wt %, depending on the suppHer and appHcation. A common interlayer thickness for automobile windshields is 0.76 mm, but interlayer used for architectural or aircraft glaring appHcations, for example, may be much thinner or thicker. There are also special grades to bond rear-view mirrors to windshields (95,96) and to adhere the components of solar cells (97,98). Multilayer coextmded sheet, each component of which provides a separate property not possible in monolithic sheet, can also be made (99—101). 

Copolymers wet and adhere well to nonporous surfaces, such as plastics and metals. They form soft, flexible films, in contrast to the tough, horny films formed by homopolymers, and are more water-resistant. As the ratio of comonomer to vinyl acetate increases, the variety of plastics to which the copolymer adheres also increases. Comonomers containing functional groups often adhere to specific surfaces for example, carboxyl containing polymers adhere well to metals. 

Contamination. Manufacturers of cosmetics must be careful to guard against chemical and microbial contamination. Chemical contamination, which may result from the presence of undesirable impurities in raw materials, is avoidable by adhering to rigid specifications for raw materials. Compendial specifications and pubHcations by the CTFA and other professional societies form the basis of most intracompany raw material specifications. Moreover, all packaging components must meet not only physical and design specifications but also such chemical requirements as extractables and absence of dust and similar contaminants (see Packaging, cosLffiTics and pharmaceuticals). 

Porcelain enamels meet a variety of performance characteristics required for different appHcations. The common characteristics of all enamels include good adherence to the substrate and good thermal expansion fit to the metal. Specific properties depend on usage for example, acid and alkaH resistance, hot water resistance, abrasion resistance, thermal shock resistance, high gloss, high reflectance, specific color, heat resistance, and cleanabihty. 

Selection of a name for a specific compound is heavily influenced by the purpose at hand communication to a general audience, communication with specialists, or storage/retrieval through archival indexes. The first requires the simplest rules possible the second requires the shortest names possible and the third requires rigid adherence to a set of rules that will reliably generate a unique name. The name chosen may be different for each situation, although that is not necessarily so. 

Since the locus of failure can clearly distinguish between adhesive and cohesive failures, the following discussion separates loss of adherence into loss of adhesion and loss of cohesion. In the loss of cohesion it is the polysiloxane network that degrades, which can be dealt with independently of the substrate. The loss of adhesion, however, is dependent on the cure chemistry of the silicone, the chemical and physical properties of the substrates, and the specific mechanisms of adhesion involved. 

This agent was approved by the FDA in May of 2000 and is the first tissue adhesive to be specifically approved for use on lung parenehyma. It is extremely strong and has excellent adherence strength on the surface of the lung. Approval... 

---