Primary acetate

Preventol CMK, see p-Chloro-/n-cresol Preventol I, see 2,4,5-Trichlorophenol Priltox, see Pentachlorophenol Primary amyl acetate, see Amyl acetate Primary isoamyl alcohol, see Isoamyl alcohol Primary isobutyl alcohol, see Isoamyl alcohol Prioderm, see Malathion Prist, see Methyl cellosolve Profume A, see Chloropicrin Profume R 40B1, see Methyl bromide Prokarbol, see 4,6-Dinitro-o-cresol... 

Deoxygenation of ROH. Acetates, primary, secondary, or tertiary, are deox-> genated when heated with 1 in the presence of a radical initiator, di-r-butyl peroxide (DTBP). Yields using (C6H5)3SiH in place of 1 are definitely lower. The presence of a double bond in the substrate can lower yields owing possibly to hydrosilylation. 

AMYLESTER KYSELINY OCTOVE BIRNENOEL OCTAN AMYLU (POLISH) PEAR OIL PENT-ACETATE 1-PENTANOL ACETATE PENTYL ACETATE n-PENTYL ACETATE 1-PENTYL ACETATE PRIMARY AMYL ACETATE... 

Primary ammonium phosphate. See Ammonium phosphate Primary amyl acetate. See Amyl acetate Primary amyl alcohol. See n-Amyl alcohol Primary decyl alcohol. See Decyl alcohol Primary isoamyl alcohol. See Isoamyl alcohol Primary magnesium phosphate. See Magnesium phosphate monobasic Primary octyl alcohol. See Caprylic alcohol Primary sodium phosphate. See Sodium phosphate... 

Ethanol, being a t> pical primary alcohol containing the -CH OH group, gives on oxidation first acetaldehyde and then acetic acid. This process, when carried out by an aqueous oxidising agent, probably consists in the direct... 

If a primary or secondary amine is heated with glacial acetic acid, the... 

One disadvantage of using acetic anhydride is that with primary amines, traces of the diacctyl compound, RN(COCH3)2, niay be formed the chances of this secondary acetylation are, however, usually remote, and recrystallisation from an aqueous solvent will generally hydrolyse the diacetyl derivative rapidly back to the mono-acetyl compound. 

Dissolve 0 5 g. of the primary amine and 0-5 g. of pure phthaUc anhydride in 5 ml. of glacial acetic acid and reflux for 20-30 minutes. (If the amine salt is used, add 1 g. of sodium acetate.) The N-substituted phthaUmide separates out on cooling. Recrystallise it from alcohol or from glacial acetic acid. 

The best results are obtained with freshly prepared xanthhydrol (reduction of xanthone with sodium amalgam. Section VII,16). Dissolve 0 -25 g. of xanthhydrol and 0 -25g. of the primary sulphonamide in 10 ml. of glacial acetic acid. Shake for 2-3 minutes at the laboratory temperature and allow to stand for 60-90 minutes. Filter oflf the derivative, recrystallise it from dioxan-water (3 1), and dry at room temperature under water pump suction for 30 minutes. 

Acetyl derivatives of aromatic amines may be prepared either witli acetic anhydride or acetic acid or with a mixture of both reagents. Primary amines react readily upon warming with acetic anhydride to yield, in the first instance, the mono-acetyl derivative, for example ... 

Acetyl derivatives. Primary and secondary amines are best acetylated with acetic anhydride ... 

The quinaldine is separated from any unreacted aniline and from the alkyl-anilines by treatment with acetic anhydride, basified with sodium carbonate and steam distilled. Only the primary and secondary amines are acetylated the acetylated amines are now much less volatile so that separation from the steam-volatile quinaldine (a tertiary amine) is facile. 

Anhydrides may often be hydrolysed in the cold with dilute alkali they also react with primary amines (compare Section 111,94). All anliydrides boil above 130° thus acetic anhydride has b.p. 140°. 

Acetyl chloride reacts vigorously with primary and secondary alcohols to yield esters it also reacts readily with any water present to form acetic acid ... 

For this reason, acetic anhydride is generally preferred for the preparation of acetyl derivatives, but acetyl chloride, in view of its greater reactivity, is a better diagnostic reagent for primary and secondary amines. 

The versatility of this reaction is quite apparent. One can use ammonium acetate to make MDA or amphetamine, or methylamine in methanol for MDMA. But methylamine is optimal because it gives higher yield and less byproducts. Also, if ammonium acetate is used, one must use either ammonia (NH3) or a primary amine (any of one s choosing. Strike supposes) in place of the triethyla-mine in the reaction. 

Indene derivatives 264a and 264b are formed by the intramolecular reaction of 3-methyl-3-phenyl-l-butene (263a) and 3,3,3-triphenylpropylene (263b) [237]. Two phenyl groups are introduced into the /3-substituted -methylstyrene 265 to form the /3-substituted /3-diphenylmethylstyrene 267 via 266 in one step[238]. Allyl acetate reacts with benzene to give 3-phenylcinnamaldehyde (269) by acyl—O bond fission. The primary product 268 was obtained in a trace amount[239]. 

The oxidative coupling of alkenes which have two substituents at the 2 posi-tion, such as isobutylene, styrene, 2-phenylpropene, 1,1-diphenylethylene, and methyl methacrylate, takes place to give the 1,1,4.4-tetrasubstituted butadienes 285 by the action of Pd(OAc)2 or PdCF in the presence of sodium acetate[255-257]. Oxidation of styrene with Pd(OAc)2 produces 1.4-diphenylbutadiene (285, R = H) as a main product and a- and /3-acetoxystyrenes as minor pro-ducts[258]. Prolonged oxidation of the primary coupling product 285 (R = Me) of 2-phenylpropene with an excess of Pd(OAc)2 leads slowly to p-... 

Hydroxylysine (328) was synthesized by chemoselective reaction of (Z)-4-acet-oxy-2-butenyl methyl carbonate (325) with two different nucleophiles first with At,(9-Boc-protected hydroxylamine (326) under neutral conditions and then with methyl (diphenylmethyleneamino)acetate (327) in the presence of BSA[202]. The primary allylic amine 331 is prepared by the highly selective monoallylation of 4,4 -dimethoxybenzhydrylamine (329). Deprotection of the allylated secondary amine 330 with 80% formic acid affords the primary ally-lamine 331. The reaction was applied to the total synthesis of gabaculine 332(203]. 

In keeping with its biogenetic origin m three molecules of acetic acid mevalonic acid has six carbon atoms The conversion of mevalonate to isopentenyl pyrophosphate involves loss of the extra carbon as carbon dioxide First the alcohol hydroxyl groups of mevalonate are converted to phosphate ester functions—they are enzymatically phosphorylated with introduction of a simple phosphate at the tertiary site and a pyrophosphate at the primary site Decarboxylation m concert with loss of the terti ary phosphate introduces a carbon-carbon double bond and gives isopentenyl pyrophos phate the fundamental building block for formation of isoprenoid natural products... 

Physical Properties. Furfuryl alcohol (2-furanmethanol) [98-00-0] is aHquid, colorless, primary alcohol with a mild odor. On exposure to air, it gradually darkens in color. Furfuryl alcohol is completely miscible with water, alcohol, ether, acetone, and ethyl acetate, and most other organic solvents with the exception of paraffinic hydrocarbons. It is an exceUent, highly polar solvent, and dissolves many resins. 

The fermentative fixing of CO2 and water to acetic acid by a species of acetobacterium has been patented acetyl coen2yme A is the primary reduction product (62). Different species of clostridia have also been used. Pseudomonads (63) have been patented for the fermentation of certain compounds and their derivatives, eg, methyl formate. These methods have been reviewed (64). The manufacture of acetic acid from CO2 and its dewatering and refining to glacial acid has been discussed (65,66). 

With aldehydes, primary alcohols readily form acetals, RCH(OR )2. Acetone also forms acetals (often called ketals), (CH2)2C(OR)2, in an exothermic reaction, but the equiUbrium concentration is small at ambient temperature. However, the methyl acetal of acetone, 2,2-dimethoxypropane [77-76-9] was once made commercially by reaction with methanol at low temperature for use as a gasoline additive (5). Isopropenyl methyl ether [116-11-OJ, useful as a hydroxyl blocking agent in urethane and epoxy polymer chemistry (6), is obtained in good yield by thermal pyrolysis of 2,2-dimethoxypropane. With other primary, secondary, and tertiary alcohols, the equiUbrium is progressively less favorable to the formation of ketals, in that order. However, acetals of acetone with other primary and secondary alcohols, and of other ketones, can be made from 2,2-dimethoxypropane by transacetalation procedures (7,8). Because they hydroly2e extensively, ketals of primary and especially secondary alcohols are effective water scavengers. 

Since the principal hazard of contamination of acrolein is base-catalyzed polymerization, a "buffer" solution to shortstop such a polymerization is often employed for emergency addition to a reacting tank. A typical composition of this solution is 78% acetic acid, 15% water, and 7% hydroquinone. The acetic acid is the primary active ingredient. Water is added to depress the freezing point and to increase the solubiUty of hydroquinone. Hydroquinone (HQ) prevents free-radical polymerization. Such polymerization is not expected to be a safety hazard, but there is no reason to exclude HQ from the formulation. Sodium acetate may be included as well to stop polymerization by very strong acids. There is, however, a temperature rise when it is added to acrolein due to catalysis of the acetic acid-acrolein addition reaction. 

Anesthesia. Materials that have unquestionable anesthetic properties are chloral hydrate [302-17-0] paraldehyde, dimethoxymethane [109-87-5] and acetaldehyde diethyl acetal. In iadustrial exposures, however, any action as an anesthesia is overshadowed by effects as a primary irritant, which prevent voluntary inhalation of any significant quantities. The small quantities which can be tolerated by inhalation are usually metabolized so rapidly that no anesthetic symptoms occur. 

The predominant cellulose ester fiber is cellulose acetate, a partially acetylated cellulose, also called acetate or secondary acetate. It is widely used in textiles because of its attractive economics, bright color, styling versatiUty, and other favorable aesthetic properties. However, its largest commercial appHcation is as the fibrous material in cigarette filters, where its smoke removal properties and contribution to taste make it the standard for the cigarette industry. Cellulose triacetate fiber, also known as primary cellulose acetate, is an almost completely acetylated cellulose. Although it has fiber properties that are different, and in many ways better than cellulose acetate, it is of lower commercial significance primarily because of environmental considerations in fiber preparation. 

The primary and secondary alcohol functionahties have different reactivities, as exemplified by the slower reaction rate for secondary hydroxyls in the formation of esters from acids and alcohols (8). 1,2-Propylene glycol undergoes most of the typical alcohol reactions, such as reaction with a free acid, acyl hahde, or acid anhydride to form an ester reaction with alkaU metal hydroxide to form metal salts and reaction with aldehydes or ketones to form acetals and ketals (9,10). The most important commercial appHcation of propylene glycol is in the manufacture of polyesters by reaction with a dibasic or polybasic acid. 

---