Viscosity reducing index

In the case of those materials known to possess an adsorptive capacity towards cement constituents and the ability to reduce the paste viscosity, there is a linear correlation between the amount adsorbed on the surface and the reduction in paste viscosity at addition levels in the region of those normally used. This is shown in Fig. 1.18 [33]. These data can be used to obtain a viscosity reducing index for various materials by measuring the slope of the line. Some values are shown in... 

Polymers for improving the viscosity index of the copolymethacrylate type can be made into dispersants by copolymerization with a nitrogen monomer. The utilization of these copoiymers allows the quantity of dispersant additives in the formulation to be reduced. 

The major use of vinylpyrrohdinone is as a monomer in manufacture of poly(vinylpyrrohdinone) (PVP) homopolymer and in various copolymers, where it frequendy imparts hydrophilic properties. When PVP was first produced, its principal use was as a blood plasma substitute and extender, a use no longer sanctioned. These polymers are used in pharmaceutical and cosmetic appHcations, soft contact lenses, and viscosity index improvers. The monomer serves as a component in radiation-cured polymer compositions, serving as a reactive diluent that reduces viscosity and increases cross-linking rates (see... 

The products manufactured are predominantiy paraffinic, free from sulfur, nitrogen, and other impurities, and have excellent combustion properties. The very high cetane number and smoke point indicate clean-burning hydrocarbon Hquids having reduced harmful exhaust emissions. SMDS has also been proposed to produce chemical intermediates, paraffinic solvents, and extra high viscosity index (XHVI) lubeoils (see Lubrication and lubricants) (44). 

In the glass (qv) and ceramic industry (see Ceramics), barite can be used both as a flux, to promote melting at a lower temperature or to increase the production rate, and as an additive to increase the refractive index of glass. The viscosity of barite-containing glass often needs to be raised. Alumina in the form of feldspar is sometimes used. To offset any color produced by iron from the barite addition, more decolorizer may be needed. When properly used, barytes help reduce seed, increase toughness and brilliancy, and reduce annealing time. Barite is also a raw material for the manufacture of other barium chemicals. 

An example of an appHcation of hydrocracking is in lubricating oils, where it is used to improve the viscosity index, color, and color stabiHty to reduce polymer formation (storage stabiHty) and to decrease the neutralization number (acidity) (61). 

On the other hand, liquid propane also has a high affinity for paraffinic hydrocarbons. Propane deasphalting removes asphaltic materials from heavy lube oil base stocks. These materials reduce the viscosity index of lube oils. In this process, liquid propane dissolves mainly paraffinic hydrocarbons and leaves out asphaltic materials. Higher extraction temperatures favor better separation of the asphaltic components. Deasphalted oil is stripped to recover propane, which is recycled. 

The relationship between film thickness of hexadecane with the addition of cholesteryl LCs and rolling speed under different pressures is shown in Fig. 25 [50], where the straight line is the theoretic film thickness calculated from the Hamrock-Dowson formula based on the bulk viscosity under the pressure of 0.174 GPa. It can be seen that for all lubricants, when speed is high, it is in the EHL regime and a speed index 4> about 0.67 is produced. When the rolling speed decreases and the film thickness falls to about 30 nm, the static adsorption film and ordered fluid film cannot be negligible, and the gradient reduces to less than 0.67 and the transition from EHL to TFL occurs. For pure hexadecane, due to the weak interaction between hexadecane molecules and metal surfaces, the static and ordered films are very thin. EHL... 

The viscosity of the solution is significantly increased when macromolecules are dissolved in a solvent. The specific viscosity of a solution t sp=(ri-r o)lr o expected to increase proportionally to the concentration c. The reduced viscosity rjgp/c still increases with increasing concentration. The data, however, can be extrapolated to zero concentration and results in the intrinsic viscosity, or the viscosity number [77], sometimes also called the Staudinger index... 

A different system has been introduced by Index Instruments [2]. This modular analysis system (MAS) provides the analysis of up to four different parameters refractive index, density, colour and optical rotation. A wide range of viscosities can be handled. The analysis, wash and drying times can be selected by computer control so that crosscontamination can be reduced to undetectable levels. Samples are only in contact with inert materials such as glass, synthetic sapphire, PTFE and 316 stainless steel. 

The effects of operating variables on the Duosol extraction system are complex and are best determined empirically. As would be expected, an increase in Selecto results in increased refinement and reduced yield. An increase in propane results in improved raffinate color and decreased viscosity index, but its effect on carbon residue is unpredictable. 

Some fermentation broths are non-Newtonian due to the presence of microbial mycelia or fermentation products, such as polysaccharides. In some cases, a small amount of water-soluble polymer may be added to the broth to reduce stirrer power requirements, or to protect the microbes against excessive shear forces. These additives may develop non-Newtonian viscosity or even viscoelasticity of the broth, which in turn will affect the aeration characteristics of the fermentor. Viscoelastic liquids exhibit elasticity superimposed on viscosity. The elastic constant, an index of elasticity, is defined as the ratio of stress (Pa) to strain (—), while viscosity is shear stress divided by shear rate (Equation 2.4). The relaxation time (s) is viscosity (Pa s) divided by the elastic constant (Pa). 

In several previous papers, the possible existence of thermal anomalies was suggested on the basis of such properties as the density of water, specific heat, viscosity, dielectric constant, transverse proton spin relaxation time, index of refraction, infrared absorption, and others. Furthermore, based on other published data, we have suggested the existence of kinks in the properties of many aqueous solutions of both electrolytes and nonelectrolytes. Thus, solubility anomalies have been demonstrated repeatedly as have anomalies in such diverse properties as partial molal volumes of the alkali halides, in specific optical rotation for a number of reducing sugars, and in some kinetic data. Anomalies have also been demonstrated in a surface and interfacial properties of aqueous systems ranging from the surface tension of pure water to interfacial tensions (such as between n-hexane or n-decane and water) and in the surface tension and surface potentials of aqueous solutions. Further, anomalies have been observed in solid-water interface properties, such as the zeta potential and other interfacial parameters. 

---