United States substances

United States Substance Abuse and Mental Health Services Administration. Hallucinogen Use. National Household Survey... 

In the United States substances are subdivided according to their flash points ... 

Diamond. Diamond [7782 0-3] is the hardest substance known (see Carbon, diamond, natural). It has a Knoop hardness of 78—80 kN/m (8000—8200 kgf/m ). The next hardest substance is cubic boron nitride with a Knoop value of 46 kN/m, and its inventor, Wentorf, beheves that no manufactured material will ever exceed diamond s hardness (17). In 1987 the world production of natural industrial diamonds (4) was about 110 t (1 g = 5 carats). It should be noted that whereas the United States was the leading consumer of industrial diamonds in 1987 (140 t) only 260 kg of natural industrial diamonds were consumed this is the lowest figure in 48 years (4), illustrating the impact that synthetic diamonds have made on the natural diamond abrasive market. 

Lead Azide. The azides belong to a class of very few useflil explosive compounds that do not contain oxygen. Lead azide is the primary explosive used in military detonators in the United States, and has been intensively studied (see also Lead compounds). However, lead azide is being phased out as an ignition compound in commercial detonators by substances such as diazodinitrophenol (DDNP) or PETN-based mixtures because of health concerns over the lead content in the fumes and the explosion risks and environmental impact of the manufacturing process. 

Fine chemicals are produced by a wide spectmm of manufacturers, largely because the distinction between different kinds of chemicals is not sharp. There are specialty producers of fine chemicals. Many companies that manufacture dmgs also manufacture the chemical substances that are used in preparing the dosage forms. A number of companies manufacture dmg chemicals and food chemicals. Some fine chemicals are made by manufacturers of heavy chemicals, and either may be simply a segment of their regular production, or some of that production which has been subjected to additional purification steps. Many fine chemicals are imported into the United States from countries such as Japan, Germany, and the Netherlands. 

United States Pharmacopeia. Reference standards are requited in many USP and NF tests, and in a few FCC tests. The USPC distributes such standards domestically and has authorized international distribution by a number of organizations or companies. There are well over 1000 USP Reference Standards, including several for melting points, and also specimens of narcotics and other controlled substances. New standards are constantly under development as needed in various USP, NF, and FCC testing methods. 

Countries that use a positive Hst, eg, Japan, Switzerland, the former Soviet Union, and the United States, Hst ak substances akowable in flavor and foods any material not Hsted is not akowable. Any material included on a positive Hst is considered safe for its intended use. This system works wek only if there is a specific procedure to akow for the addition of new materials. In the United States there is the Food Additive Petition and the GRAS route. No new material can be used in flavor or foods unless it undergoes one of these two procedures. This assures that any new technology can be added and used after it is reviewed for safety. 

Historically, the annual consumption of nickel fluoride was on the order of a few metric tons. Usage is droppiag because nickel fluoride is Hsted ia the EPA and TSCA s toxic substance iaventory. Nickel fluoride tetrahydrate is packaged ia 200—500-lb (90.7—227-kg) dmms and the 1993 price was 22/kg. Small quantities for research and pilot-plant work are available from Advance Research Chemicals, Aldrich Chemicals, Johnson/Matthey, Pfalt2 and Bauer, PCR, and Strem Chemicals of the United States, Fluorochem of the United Kingdom, and Morita of Japan. 

Formamide is a registered substance, eg, in TSCA (75-12-7), EINECS (200-842-0), and MITI (2-681), and can, therefore, be produced in and imported into the United States, EEC, and Japan in compliance with the abovementioned acts. 

Natural Gas Upgrading via Fischer-Tropsch. In the United States, as in other countries, scarcities from World War II revived interest in the synthesis of fuel substances. A study of the economics of Fischer synthesis led to the conclusion that the large-scale production of gasoline from natural gas offered hope for commercial utiHty. In the Hydrocol process (Hydrocarbon Research, Inc.) natural gas was treated with high purity oxygen to produce the synthesis gas which was converted in fluidized beds of kon catalysts (42). 

Vinyl-Coated Fabrics. Leather substitutes are designed to imitate the appearance of leather with its grain surface. This requirement has been accomphshed by coating substances that are capable of forming a uniform film, and was first met by plasticized poly(vinyl chloride) (PVC). A leather-like material termed vinyl-coated fabric was developed in the 1930s in the United States and Germany. Shortages of leather after World War 11 spurred the expansion of this material. 

Commercial lithium peroxide has been assigned UN No. 1472 and should be transported in accordance with international transport regulations pertaining to Class 5.1, oxidizing substances. It is manufactured by ChemetaH AG (Germany) and Lithium Corp. of America (United States). The U.K. price in 1994 was J48—198/kg ( 70—285/kg), depending on quantity. 

In the United States, the reportable quantity of 1-propanol for spills under CERCLA "Superfund" is 100 Ib/d (45.4 kg/d). However, no reportable quantity is assigned for transport (43). The substance is on the list for atmospheric standards, as defined iu 40 CER 60.489 (47). The iatent of these standards is to require all newly constmcted, modified, and reconstmcted manufacturiug units to use the best demonstrated system of continuous emission reduction for equipment leaks of volatile organic compounds (47). 1-Propanol is also on the right-to-know regulations of the states of Connecticut,... 

Anxiety disorders and insomnia represent relatively common medical problems within the general population. These problems typically recur over a person s lifetime (3,4). Epidemiological studies in the United States indicate that the lifetime prevalence for significant anxiety disorders is about 15%. Anxiety disorders are serious medical problems affecting not only quaUty of life, but additionally may indirecdy result in considerable morbidity owing to association with depression, cardiovascular disease, suicidal behavior, and substance-related disorders. 

In the United States, the Clean Air Act of 1990 requires plants to reduce emissions of 189 toxic and carcinogenic substances such as chlorine, chloroform, and 2,3,7,8-TCDD (dioxin) by 90% over the 1990s. The U.S. Environmental Protection Agency is working to develop standards based on maximum achievable control technologies and the industry has invested bUHons of doUars in capital investments to retrofit or rebuUd plant equipment to meet these measures. 

Poly(vinyl chloride) is Hsted on the TSCA inventory and the Canadian Domestic Substances List (DSL) as ethene, chloro-, homopolymer [9002-86-2]. Because polymers do not appear on the European Community Commercial Chemical Substances listing or EINECS, poly(vinyl chloride) is listed through its monomer, vinyl chloride [75-01-4]. In the United States, poly(vinyl chloride) is an EPA hazardous air pollutant under the Clean Air Act Section 112 (40 CER 61) and is covered under the New Jersey Community Right-to-Know Survey N.J. Environmental Hazardous Substances (EHS) List as "chloroethylene, polymer" with a reporting threshold of 225 kg (500 lb). 

---