Tons

Once the life-cycle inventory has been quantified, we can attempt to characterize and assess the eflfects of the environmental emissions in a life-cycle impact analysis. While the life-cycle inventory can, in principle at least, be readily assessed, the resulting impact is far from straightforward to assess. Environmental impacts are usually not directly comparable. For example, how do we compare the production of a kilogram of heavy metal sludge waste with the production of a ton of contaminated aqueous waste A comparision of two life cycles is required to pick the preferred life cycle. 

The high C/H ratio for heavy fuels and their high levels of contaminants such as sulfur, water, and sediment, tend to reduce their NHV which can reach as low as 40,000 kJ/kg by comparison to the 42,500 kJ/kg for a conventional home-heating oil. This characteristic is not found in the specifications, but it is a main factor in price negotiations for fuels in terms of cost per ton. Therefore it is subject to frequent verification. 

There are, however, technological means available to burn incompletely desulfurized fuels at the same time minimizing SO2 emissions. In the auto-desulfurizing AUDE boiler developed by IFF, the effluent is treated in place by an absorbent based on lime and limestone calcium sulfate is obtained. This system enables a gas desulfurization of 80% it requires nevertheless a relatively large amount of solid material, on the order of 200 kg per ton of fuel. 

Chapter 7. STANDARDS AND SpECIFICA TONS OF PETROLEUM PRODUCTS 299... 

During loading and unloading of crude oil tankers, the specific gravity of the crude is measured to confirm it meets the specifications for the case where payment is made on a barrel basis, or when the volume is converted into weight if the transaction is based on a price per ton (Hayward et al., 1980). 

The resulting vapor phase is called associated gas and the liquid phase is said to be the crude oil. The production of gas is generally considered to be unavoidable because only a small portion is economically recoverable for sale, and yet the quantity produced is relatively high. The reservoirs in the Middle East are estimated to produce 0.14 ton of associated gas per ton of crude. 

For onshore operations various types of landrigs are available, ranging from truck mounted light rigs to heavy landrigs weighing several hundred tons. 

A land rig can weigh over 200 tons and is transported in smaller loads to be assembled on site. 

The prime global authority is the International Maritime Organisation. The IMO sets the standards and guidelines for the removal of offshore installations. The guidelines specify that installations in less than 75 meters of water with substructures weighing less than 4,000 tons be completely removed from the site. Those in deeper water must be removed to a depth of 55 meters below the surface so that there is no hazard to navigation. In some countries the depth to which structures have to be removed has already been extended to 100m. 

Subsea facilities are easily decommissioned as they are relatively small and easy to lift. However, subsea manifolds and templates can weigh in excess of 1,000 tons and will require heavy lift barges for removal. 

The GAMMASCAN 1500 HR is a combined system for two-dimensional (2D-CT) and three-dimensional (3D-CT) computed tomography, as well as digital radiography (DR). The system is equipped with two separate detector systems for the fan-beam and cone-beam CT. The sire of the objects is limited to a height of four meters, maximum diameters of 1.5 meters and a weight of up to 15 tons. The turntable which carries the test samples can be moved along and across the beam direction ( X- and Y- direction). The radiation source and the detector systems can be moved in Z- direction, both, simultaneously and independently. 

In the coal-mining industry, more than 300 mines are operated in three coal-mining regions Ukraine produces only 5 5 million tons of its own oil, but the ramified network of oil pipelines supports the operation of 10 petroleum plants. The Ukrainian gas pipelines transport the Russian gas to Central and Western Europe. 

The efforts of the experts from Pivdenny have made it possible for Ukraine to become firmly established in the first three of space powers (after USA and Russia). More than 400 earth satellites developed in Pivdenny have been in space In recent years experts have developed the unique camer-rockets Zenith and Cyclone, capable of taking 4 and 14 tons into orbit, respectively. No other carrier-rockets of this type exist anywhere in the world, so they were selected for the international project Sea Start and Globalstar The NDT experts from Pivdenny have made a great contribution to these development, as practically all the parts and components of the carrier-rockets are subjected to thorough control. 

On the industrial scale it is produced in large quantities for the manufacture of sulphuric acid and the production methods are dealt with later. It was once estimated that more than 4 000 000 tons of sulphur dioxide a year entered the atmosphere of Britain from the burning of coal and oil. 

Sulphuric acid is probably the most important chemical substance not found naturally. Its manufacture is therefore important the total world production is about 25 000 000 tons a year. 

The entire Hving and material world consists of compounds and mixtures of compounds. Basic chemicals, such as ethylene, are produced in many millions of tons each year and are converted into a wide variety of other chemicals. Complicated molecular structures are synthesized by Mother Nature, or by chemists having taken up the challenge posed by Nature. However, we also have materials such as glues which are composed of mixtures of rather ill-defined polymers. 

The grid of computed values for the variable used in defining the con ton r IS a grid of exactly the si/e of th c cn rren t workin g area sii b-divided even ly such that th e total n urn her of grid poin ts is as th e 11 ser specifies. 

Boric acid is also an important boron compound with major markets in textile products. Use of borax as a mild antiseptic is minor in terms of dollars and tons. Boron compounds are also extensively used in the manufacture of borosilicate glasses. Other boron compounds show promise in treating arthritis. 

Natural occurring oxygen 18 is stable and available commercially, as is water (H20 with 15% 180). Commercial oxygen consumption in the U.S. is estimated at 20 million short tons per year and the demand is expected to increase substantially. 

The gas costs 5 cents / fb in small quantities, and about 15/ton in large quantities. 

Safe handling techniques enable the transport liquid fluorine by the ton. 

Cesium, an alkali metal, occurs in lepidolite, pollucte (a hydrated silicate of aluminum and cesium), and in other sources. One of the world s richest sources of cesium is located at Bernic Lake, Manitoba. The deposits are estimated to contain 300,000 tons of pollucite, averaging 20% cesium. 

Rhodium occurs native with other platinum metals in river sands of the Urals and in North and South America. It is also found with other platinum metals in the copper-nickel sulfide area of the Sudbury, Ontario region. Although the quantity occurring here is very small, the large tonnages of nickel processed make the recovery commercially feasible. The annual world production of rhodium is only 7 or 8 tons. 

---