Terpenes unsaturated

Citrus essential oils are widely used as a raw material of flavour in food and perfumery industries. They are also called "cold-pressed oils" and contain more than 200 compounds which can be grouped in three fractions the hydrocarbon terpenes (unsaturated compounds) that constitute the major amount (from 60 to 98% by weight) but have undesirable off-flavours characteristics the oxygenated compounds (flavour fraction) that are directly responsible for the characteristic citrus flavour and the non-volatile residues. 

Acyclic terpenes. Unsaturated (polymers of isoprene, C5H8). 

Silica gel Alcohols, aldehydes, alkaloids, amines, amino acids, amphetamines, antibiotics, antioxidants, barbiturates, carbohydrates, flavonoids, herbicides, heterocyclic compounds, hydrocarbons, indoles, insecticides, ketones, lipids, nitro compounds, organic acids, peroxides, pesticides, phenols, plasticizers, polypeptides, steroids, terpenes, unsaturated compounds, vitamins. 

Several analytical and separation techniques are based on the reversible formation of complexes between alkenes and Ag+ ions. Analytical methods for terpenes, unsaturated acids and esters, and other unsaturated nonpolar compounds are based on the use of Ag" -impregnated materials for thin-layer (TLC) and high-pressure (HPLC) as well as gas-liquid (GLC) chromatography. GLC measurements done some years ago suggest that the affinity decreases with additional substituents, but increases with strain. ... 

Trocino s concept of total utilization of the raw material, Douglas-fir bark, to produce several salable products was good, and earned Bohemia the 1976 Environmental Award from the American Paper Institute and the American Forest Products Institute. Unfortunately a certain amount of solvent losses is inevitable. Thus, efficient solvent extraction and recovery of solvent to obtain the primary product in a 3% yield, based on bark, could only be expected to be cost effective if the product sold in the dollars per kilogram range, such as carnauba wax imported from Brazil or Mexico. Unrefined Douglas-fir wax is soft because of the presence of terpenes, unsaturated fats, etc., and is subject to discolorization by iron salts because of the presence of ferulate esters, which promote the formation of complexes. As in the case of the polyphenolic extractives from redwood and hemlock bark, the product end-use was not sufficiently unique to ultimately justify a price that would support production and operating costs, and generate a reasonable profit. 

Terpenes.—Unsaturated hydrocarbons derived from isoprene,... 

Heteroatom functionalized terpene resins are also utilized in hot melt adhesive and ink appHcations. Diels-Alder reaction of terpenic dienes or trienes with acrylates, methacrylates, or other a, P-unsaturated esters of polyhydric alcohols has been shown to yield resins with superior pressure sensitive adhesive properties relative to petroleum and unmodified polyterpene resins (107). Limonene—phenol resins, produced by the BF etherate-catalyzed condensation of 1.4—2.0 moles of limonene with 1.0 mole of phenol have been shown to impart improved tack, elongation, and tensile strength to ethylene—vinyl acetate and ethylene—methyl acrylate-based hot melt adhesive systems (108). Terpene polyol ethers have been shown to be particularly effective tackifiers in pressure sensitive adhesive appHcations (109). 

By-Products. There are three stages within the pulping operation at which wood-derived chemicals can be recovered as by-products. Turpentine is obtained from the reHef of gases after an initial steaming of chips in the digester. Better yields of turpentine are obtained from batch digesters than from continuous systems. Pines and firs give the best yields. Turpentine is composed principally of unsaturated bicycHc hydrocarbons, of which ca 90% are a- and P-pinenes and 5—12% other terpenes. 

Steroids (1) are members of a large class of lipid compounds called terpenes that are biogenicaHy derived from the same parent compound, isoprene, C Hg Steroids contain or are derived from the perhydro-l,2-cyclopentenophenanthrene ring system (1) and are found in a variety of different marine, terrestrial, and synthetic sources. The vast diversity of the natural and synthetic members of this class depends on variations in side-chain substitution (primarily at C17), degree of unsaturation, degree and nature of oxidation, and the stereochemical relationships at the ring junctions. 

Other natural product-based resins also became widely used, such as the light colored Lewis acid oligomerized products of terpenes such as a-pinene, p-pinene, and limonene. These natural product resins are relatively expensive, however, and formulators now often use the newer, less expensive synthetic resins in present day natural rubber PSAs. These are termed the aliphatic or C-5 resins and are Lewis acid oligomerized streams of predominately C-5 unsaturated monomers like cis- and /rawi-piperylene and 2-methyl-2-butenc [37]. These resins are generally low color products with compatibility and softening points similar to the natural product resins. Representative products in the marketplace would be Escorez 1304 and Wingtack 95. In most natural rubber PSA formulations, rubber constitutes about 100 parts and the tackifier about 75-150 parts. 

Crude turpentine is distilled to obtain refined products used in the fragrance and flavour industry. Only the unsaturated mono- and bicyclic terpenes are of interest for resin production. These are mainly a-pinene, p-pinene and dipentcne (D,L-limonene) (Fig. 17). D-Limonene is obtained by extraction of orange peel in citrus fruits. 

Resins from pure monomers. Some colourless resins can be produced from pure unsaturated monomers, such as styrene, oi-methylstyrene and vinyl-toluenes (Fig. 19). These monomers are used individually or as blends with terpenes or unsaturated aliphatics. 

Hydrogen fluoride adds to more complex molecules, such as unsaturated steroids, to give fluorinated derivatives [/, 8] Low temperatures and inert diluents, such as tetrahydrofuran or methylene chloride, are generally employed. With bicyclic unsaturated terpenes, rearrangements often accompany addition to the double bond [/]. 

The reaction of a cyclic ketone—e.g. cyclohexanone 1—with methyl vinyl ketone 2 resulting in a ring closure to yield a bicyclic a ,/3-unsaturated ketone 4, is called the Robinson annulation This reaction has found wide application in the synthesis of terpenes, and especially of steroids. Mechanistically the Robinson annulation consists of two consecutive reactions, a Michael addition followed by an Aldol reaction. Initially, upon treatment with a base, the cyclic ketone 1 is deprotonated to give an enolate, which undergoes a conjugate addition to the methyl vinyl ketone, i.e. a Michael addition, to give a 1,5-diketone 3 ... 

A terpene yielding isofenchyl alcohol on hydration, which Wallach considers to be one of the fenchenes, was artificially prepared by converting nopinone into a hydroxy ester by means of bromoacetic ester and zinc-dust. The hydroxy ester is dehydrated by potassium bisulphate, and so yields an unsaturated ester, which on saponification yields an acid from which the terpene results by distillation. This fenchene has the following characters —... 

NMHC. A large number of hydrocarbons are present in petroleum deposits, and their release during refining or use of fuels and solvents, or during the combustion of fuels, results in the presence of more than a hundred different hydrocarbons in polluted air (43,44). These unnatural hydrocarbons join the natural terpenes such as isoprene and the pinenes in their reactions with tropospheric hydroxyl radical. In saturated hydrocarbons (containing all single carbon-carbon bonds) abstraction of a hydrogen (e,g, R4) is the sole tropospheric reaction, but in unsaturated hydrocarbons HO-addition to a carbon-carbon double bond is usually the dominant reaction pathway. 

Considerable attention has been directed in determining the products from reactions of aliphatic hydrocarbons, aromatic compounds, and unsaturated compounds including biogenic terpenes that exhibit appreciable volatility. These studies have been conducted both in simulation chambers and using natural sunlight in the presence of NO. 

We focused our attention on Tall oil, a by-product of the paper industry, whenever this is prepared according to the KRAFT process. Said material consists of a mixture of highly unsaturated fatty acids (many of which with conjugated diene systems) and terpene derived rosin acids. The rosin acids have the molecular formula C20H30O2 and thus belong to the diterpenes (pimaric and abietic acids). Tall Oil has an iodine number equal to approximately 170 gl2/100 g. 

The only other functional group is the conjugated unsaturated ester. This functionality is remote from the stereocenters and the ketone functionality, and does not play a key role in most of the reported syntheses. Most of the syntheses use cyclic starting materials. Those in Schemes 13.4 and 13.5 lead back to a para-substituted aromatic ether. The syntheses in Schemes 13.7 and 13.8 begin with an accessible terpene intermediate. The syntheses in Schemes 13.10 and 13.11 start with cyclohexenone. Scheme 13.3 presents a retrosynthetic analysis leading to the key intermediates used for the syntheses in... 

Alkenes, terpenes and unsaturated glycerides react exothermically, some vigorously [1]. Ignition may occur with some organic materials [2],... 

Intramolecular cycloadditions of a,p-unsaturated lactones to alkenes have been used as key step in the synthesis of a precursor of the terpene reserpine 480) (4.68) and of fused cyclooctanes (4.69) 481 ... 

Comparative catalytic activities (turnover numbers and selectivity (in parentheses)) of ordered Ti-MCM-41 (A) and amorphous titania-silica (B-E) catalysts in the epoxidation of unsaturated cyclic terpenes (1-6) using anhydrous TBHP... 

Several unsaturated cyclic hydrocarbons, having the general formula C]qHj5, occur in certain fragrant natural oils that are distilled from plant materials. These hydrocarbons are called terpenes and include pinene (in turpentine) and limonene (in lemon and orange oils). 

Wood contains a small proportion (usually less than 5%) of components which are extractable by organic solvents such as ethanol or dichloromethane. The proportion of these extractives varies in hardwoods and softwoods and also between species. Although many of these substances are removed during the chemical pulping process, some may still be retained in the final sheet of paper. Their chemical composition is very varied, and they include alkanes, fatty alcohols and acids (both saturated and unsaturated), glycerol esters, waxes, resin acids, terpene and phenolic components. The proportion which remains in pulp and paper depends upon the pulping process used. In general, acidic components such as the resin and fatty acids are relatively easily removed by alkali by conversion to their soluble... 

Complex hydrides have been used rather frequently for the conjugate reduction of activated dienes92-95. Just and coworkers92 found that the reduction of a,ft-unsaturated ketene 5,5-acetals with lithium triethylborohydride provided mixtures of 1,4- and 1,6-reduction products which were transformed into enals by treatment with mercuric salts (equation 27). Likewise, tetrahydro-3//-naphthalen-2-ones can be reduced with L-Selectride to the 1,6-reduction products93 -95 this reaction has been utilized in the stereoselective synthesis of several terpenes, e.g. of (/ )-(—)-ligularenolide (equation 28)95. Other methods for the conjugate reduction of acceptor-substituted dienes involve the use of methylcopper/diisobutylaluminum hydride96 and of the Hantzsch ester... 

Classical organic chemistry provides a wide variety of potential analytes for electron ionization, the only limitation being that the analyte should be accessible to evaporation or sublimation without significant thermal decomposition. These requirements are usually met by saturated and unsaturated aliphatic and aromatic hydrocarbons and their derivatives such as halides, ethers, acids, esters, amines, amides etc. Heterocycles generally yield useful El spectra, and flavones, steroids, terpenes and comparable compounds can successfully be analyzed by El, too. Therefore, El represents the standard method for such kind of samples. 

The oxidation of alcohols to carbonyl compounds has been studied by several authors and a variety of methods have been used. Papers concerned vith such oxidations are illustrated (Scheme 3.26). Good results have been obtained using pyridinium chlor-ochromate (PCC) adsorbed onto silica gel for the selective oxidation of unsaturated substrates e.g. terpene [135] and furanyl derivatives [136]. Steroidal homoallylic alcohols can be converted to the corresponding 4-ene-3,6-diones using tetrapropylammo-nium per-ruthenate (TPAP) in catalytic amounts [137]. In this case, the oxidising agent is N-methyl morpholine N-oxide (NMO). 

Cyclic olefins and diolefins form much more aerosol than 1-alkenes that have the same number of carbon atoms (for example, cyclohexene 1-hexene, and 1,7-octadiene 1-octene). The same effect of chain length and double-bond position is observed for diolefins (1,7-octadiene > 1,6-heptadiene > 1,5-hexadiene, and 1,7-octadiene 2,6-octadiene). Heavier unsaturated cyclic compounds, such as indene and terpenes, form even more aerosol. 

---