Superconductivity applications

The rather low critical current densities expected in bulk samples of these granular superconductor materials (103)(104), and their relatively low magnetic critical fields (50)(78)(105)(106), allied with the relatively low Tc s observed would appear to hinder development of superconducting applications for these materials. Even the critical current of 5 X 105 A/cm2 observed for single crystalline thin films (39) is now considered low for a superconductor at 4.2K. However, when considering the applicability of a material to a task,... 

You are too naive, his friend retorts. He adds that American politicians were already advocating secrecy, aimed at locking out the Japanese. Eventually, both the spy and the profit-hungry businessman get their just deserts the businessman finds he cannot patent a trivial superconducting application and the spy falls into the arms of a pretty girl. 

Kumar, P. (1988) High purity niobium for superconducting applications, J. Less-Common Metals 139, 49-58. 

Electrical and Electronic Applications. Silver neodecanoate [62804-19-7] has been used in the preparation of a capacitor-end termination composition (110), lead and stannous neodecanoate have been used in circuit-board fabrication (111), and stannous neodecanoate has been used to form patterned semiconductive tin oxide films (112). The silver salt has also been used in the preparation of ceramic superconductors (113). Neodecanoate salts of barium, copper, yttrium, and europium have been used to prepare superconducting films and patterned thin-fHm superconductors. To prepare these materials, the metal salts are deposited on a substrate, then decomposed by heat to give the thin film (114—116) or by a focused beam (electron, ion, or laser) to give the patterned thin film (117,118). The resulting films exhibit superconductivity above Hquid nitrogen temperatures. 

For a large number of applications involving ceramic materials, electrical conduction behavior is dorninant. In certain oxides, borides (see Boron compounds), nitrides (qv), and carbides (qv), metallic or fast ionic conduction may occur, making these materials useful in thick-film pastes, in fuel cell apphcations (see Fuel cells), or as electrodes for use over a wide temperature range. Superconductivity is also found in special ceramic oxides, and these materials are undergoing intensive research. Other classes of ceramic materials may behave as semiconductors (qv). These materials are used in many specialized apphcations including resistance heating elements and in devices such as rectifiers, photocells, varistors, and thermistors. 

Superconductivity The physical state in which all resistance to the flow of direct-current electricity disappears is defined as superconductivity. The Bardeen-Cooper-Schriefer (BCS) theoiy has been reasonably successful in accounting for most of the basic features observed of the superconducting state for low-temperature superconductors (LTS) operating below 23 K. The advent of the ceramic high-temperature superconductors (HTS) by Bednorz and Miller (Z. Phys. B64, 189, 1989) has called for modifications to existing theories which have not been finahzed to date. The massive interest in the new superconductors that can be cooled with liquid nitrogen is just now beginning to make its way into new applications. 

NMR instrumentation consists of three chief components a magnet, a spectrometer console, and a probe. While in the past much solid state NMR research was conducted on home-built equipment, the current trend is toward the acquisition of commercial systems. The magnets used for solid state NMR applications generally are superconducting solenoids with a cylindrical bore of 89-mm diameter. The most common field strengths available, 4.7, 7.0, 9.4, and 11.7 Tesla, correspond to proton resonance frequencies near 200, 300, 400, and 500 MHz, respectively. 

Recent applications of e-beam and HF-plasma SNMS have been published in the following areas aerosol particles [3.77], X-ray mirrors [3.78, 3.79], ceramics and hard coatings [3.80-3.84], glasses [3.85], interface reactions [3.86], ion implantations [3.87], molecular beam epitaxy (MBE) layers [3.88], multilayer systems [3.89], ohmic contacts [3.90], organic additives [3.91], perovskite-type and superconducting layers [3.92], steel [3.93, 3.94], surface deposition [3.95], sub-surface diffusion [3.96], sensors [3.97-3.99], soil [3.100], and thermal barrier coatings [3.101]. 

No superconductivity has yet been found in carbon nanotubes or nanotube arrays. Despite the prediction that ID electronic systems cannot support supercon-ductivity[33,34], it is not clear that such theories are applicable to carbon nanotubes, which are tubular with a hollow core and have several unit cells around the circumference. Doping of nanotube bundles by the insertion of alkali metal dopants between the tubules could lead to superconductivity. The doping of individual tubules may provide another possible approach to superconductivity for carbon nanotube systems. 

Niobium finds use in the production of numerous stainless steels for use at high temperatures, and Nb/Zr wires are used in superconducting magnets. The extreme corrosion-resistance of tantalum at normal temperatures (due to the presence of an exceptionally tenacious film of oxide) leads to its application in the construction of chemical plant, especially where it can be used as a liner inside cheaper metals. Its complete inertness to body fluids makes it the ideal material for surgical use in bone repair and internal suturing. 

It now appears that such difficulties can largely be overcome by the application of proton-proton spin-decoupling and especially by means of the very high resolution now available in spectrometers of the superconducting solenoid type (see below). 

Figure 3.9 shows a schematic sectional drawing of a liquid-helium Mbssbauer cryostat with a superconducting magnet optionally included. The layout is kept generic to highlight a few issues that are essential for applications in transition metal chemistry ... 

The application of superconductivity in electrical engineering offers revolutionary possibilities huge current densities with no resistive loss very high magnetic fields with no power supply required the possible elimination of iron in electrical machines and the reduction in size and cost of plant. The first wide-scale application of superconductivity has... 

---