Strict

It is strictly for convenience that certain conventions have been adopted in the choice of a standard-state fugacity. These conventions, in turn, result from two important considerations (a) the necessity for an unambiguous thermodynamic treatment of noncondensable components in liquid solutions, and (b) the relation between activity coefficients given by the Gibbs-Duhem equation. The first of these considerations leads to a normalization for activity coefficients for nonoondensable components which is different from that used for condensable components, and the second leads to the definition and use of adjusted or pressure-independent activity coefficients. These considerations and their consequences are discussed in the following paragraphs. 

Equation (7-8). However, for liquid-liquid equilibria, the equilibrium ratios are strong functions of both phase compositions. The system is thus far more difficult to solve than the superficially similar system of equations for the isothermal vapor-liquid flash. In fact, some of the arguments leading to the selection of the Rachford-Rice form for Equation (7-17) do not apply strictly in the case of two liquid phases. Nevertheless, this form does avoid spurious roots at a = 0 or 1 and has been shown, by extensive experience, to be marltedly superior to alternatives. 

Let us now consider a few examples for the use of this simple representation. A grand composite curve is shown in Fig. 14.2. The distillation column reboiler and condenser duties are shown separately and are matched against it. Neither of the distillation columns in Fig. 14.2 fits. The column in Fig. 14.2a is clearly across the pinch. The distillation column in Fig. 14.26 does not fit, despite the fact that both reboiler and condenser temperatures are above the pinch. Strictly speaking, it is not appropriately placed, and yet some energy can be saved. By contrast, the distillation shown in Fig. 14.3a fits. The reboiler duty can be supplied by the hot utility. The condenser duty must be integrated with the rest of the process. Another example is shown in Fig. 14.36. This distillation also fits. The reboiler duty must be supplied by integration with the process. Part of the condenser duty must be integrated, but the remainder of the condenser duty can be rejected to the cold utility. 

It is rare for there to be two process pinches in a problem. Multiple pinches usually arise from the introduction of additional utilities causing utility pinches. However, cases such as that shown in Fig. 16.18 are not uncommon, where there is, strictly speaking, only one pinch (one place where occurs), but there is a near-pinch. This... 

As stated previously, the source of capital is often not known, and hence it is not known whether or not Eq. (A. 10) is appropiiate to represent the cost of capital. Equation (A. 10) is, strictly speaking, only appropriate if the money for capital expenditure is to be borrowed over a fixed period at a fixed rate of interest. Moreover, if Eq. (A. 10) is accepted, then the number of years over which the capital is to be annualized is unknown, as is the rate of interest. However, the most important thing is that even if the source of capital is not known, etc., and uncertain assumptions are necessary, Eq. (A. 10) provides a common basis for the comparison of competing projects. 

A molecule is chiral if it cannot be superimposed on its mirror image (or if it does not possess an alternating axis of symmetry) and would exhibit optical activity, i.e. lead to the rotation of the plane of polarization of polarized light. Lactic acid, which has the structure (2 mirror images) shown exhibits molecular chirality. In this the central carbon atom is said to be chiral but strictly it is the environment which is chiral. 

Gay[Pg.188]

CjHqNOj Colourless crystals m.p. 220-222 C. The naturally occurring product is laevorotatory. While not strictly an amino-... 

Raoult s law When a solute is dissolved in a solvent, the vapour pressure of the latter is lowered proportionally to the mole fraction of solute present. Since the lowering of vapour pressure causes an elevation of the boiling point and a depression of the freezing point, Raoult s law also applies and leads to the conclusion that the elevation of boiling point or depression of freezing point is proportional to the weight of the solute and inversely proportional to its molecular weight. Raoult s law is strictly only applicable to ideal solutions since it assumes that there is no chemical interaction between the solute and solvent molecules. 

Strictly speaking, a group of atoms cannot be isolated from the rest of the molecule. However, with a few exceptions, the same group always... 

The Superplus with its RON and MON greater than or equal to 98 and 88 respectively. These two values do not correspond to official specifications but to quality specification sheets drawn up by French auto manufacturers. Strictly according to the rules, Superplus is only a variety of a top quality Eurosuper. 

It is noteworthy, however, that traces of sulfur can have beneficial effects on the anti-wear resistance of fuel injection pumps. It is thus undesirable to reduce the sulfur content to extremely low values unless additives having lubricating qualities are added. Independently from total sulfur content, the presence of mercaptans that are particularly aggressive towards certain metal or synthetic parts is strictly controlled. The mercaptan content is thereby limited to 0.002% (20 ppm) maximum. The analysis is performed chemically in accordance to the NF M 07-022 or ASTM D 3227 procedures. 

The main justification for diesel fuel desulfurization is related to particulate emissions which are subject to very strict rules. Part of the sulfur is transformed first into SO3, then into hydrated sulfuric acid on the filter designed to collect the particulates. Figure 5.21 gives an estimate of the variation of the particulate weights as a function of sulfur content of diesel fuel for heavy vehicles. The effect is greater when the test cycle contains more high temperature operating phases which favor the transformation of SO2 to SO3. This is particularly noticeable in the standard cycle used in Europe (ECE R49). 

Motor fuels are submitted to strict regulations concerning physical properties and properties of combustion, for which the octane number is the most representative characteristic. 

The strict definition of a phase is any homogeneous and physically distinct region that is separated from another such region by a distinct boundary . For example a glass of water with some ice in it contains one component (the water) exhibiting three phases liquid, solid, and gaseous (the water vapour). The most relevant phases in the oil industry are liquids (water and oil), gases (or vapours), and to a lesser extent, solids. 

A fatal accident and some other disasters, which were caused by small cracks, lead to a more strict consideration of the security of these steam drums. Parallel to these the economical pressure, due to the globalisation of the today s industry, lead to the increase of the pressure and the rotation speed of the paper production machines for a higher output of the production, which means, that all safety aspects from the design and the material will be exploited totally. On the other hand cast iron is also not a ductile and comfortable material, like the most steels for the pressure equipment. 

The characterization of probe contributes to understanding the probe behaviour and gives the probe features as well. We have illustrated though different examples how to manage to limit the measurements to what is strictly necessary. We think that many things are still to do either to simplify with automatic process system existing procedures or to imagine different tests. 

In developing the procedure of testing the features of NDT technological process must be taken into account, particularly, availability of the object for testing, strict characteristics of NDT devices being used and other factors which influence on the accuracy and reliability of measurements. 

Checking of NDT devices is mandatory and is strictly regulated. Checking is performed and supervised by National metrological service. The term calibration is rather new in our practice. The works on calibration of NDT equipment are presented in the block-scheme 2. 

For this kind of case, a modification of the dilution method is being developed. Instead of using an external fixed-geometry measurement chamber, a suitable part of the process, e.g. a stretch of pipe, is used. A radiation detector is mounted on the outside of the pipe, and a tracer emitting sufficiently hard gamma radiation is used. As sufficient mixing can be achieved by injecting upstream the separator the radiation level found will be strictly proportional to the concentration and thus inversely proportional to the true flow rate. 

Finally, Newmann and co-workers [30] (see also Ref. 31) have argued that while free energy contributions may not be strictly additive as in Eq. IV-11, there should, in principle, be an equation of state relating the work of adhesion to the separate liquid surface tensions such as... 

Here, fisAB denotes the angle as measured in liquid A, and the phases in parentheses have saturated the immediately preceding phase. A strictly rigorous nomenclature would be yet more complicated we simply assume that A and B are saturated by the solid and further take it for granted that the two phases at a particular interface are mutually saturated. mutual saturation effects are neglected, then the combination of Eqs. X-23 and X-21 gives... 

The Langmuir-Hinshelwood picture is essentially that of Fig. XVIII-14. If the process is unimolecular, the species meanders around on the surface until it receives the activation energy to go over to product(s), which then desorb. If the process is bimolecular, two species diffuse around until a reactive encounter occurs. The reaction will be diffusion controlled if it occurs on every encounter (see Ref. 211) the theory of surface diffusional encounters has been treated (see Ref. 212) the subject may also be approached by means of Monte Carlo/molecular dynamics techniques [213]. In the case of activated bimolecular reactions, however, there will in general be many encounters before the reactive one, and the rate law for the surface reaction is generally written by analogy to the mass action law for solutions. That is, for a bimolecular process, the rate is taken to be proportional to the product of the two surface concentrations. It is interesting, however, that essentially the same rate law is obtained if the adsorption is strictly localized and species react only if they happen to adsorb on adjacent sites (note Ref. 214). (The apparent rate law, that is, the rate law in terms of gas pressures, depends on the form of the adsorption isotherm, as discussed in the next section.)... 

There are tliree important varieties of long-range forces electrostatic, induction and dispersion. Electrostatic forces are due to classical Coulombic interactions between the static charge distributions of the two molecules. They are strictly pairwise additive, highly anisotropic, and can be either repulsive or attractive. 

There are several different fomis of work, all ultimately reducible to the basic definition of the infinitesimal work Dn =/d/ where /is the force acting to produce movement along the distance d/. Strictly speaking, both/ and d/ are vectors, so Dn is positive when the extension d/ of the system is in the same direction as the applied force if they are in opposite directions Dn is negative. Moreover, this definition assumes (as do all the equations that follow in this section) that there is a substantially equal and opposite force resisting the movement. Otiierwise the actual work done on the system or by the system on the surroundings will be less or even zero. As will be shown later, the maximum work is obtained when tlie process is essentially reversible . 

---