Stirred-tank continuous mode

Chapter 2 treated multiple and complex reactions in an ideal batch reactor. The reactor was ideal in the sense that mixing was assumed to be instantaneous and complete throughout the vessel. Real batch reactors will approximate ideal behavior when the characteristic time for mixing is short compared with the reaction half-life. Industrial batch reactors have inlet and outlet ports and an agitation system. The same hardware can be converted to continuous operation. To do this, just feed and discharge continuously. If the reactor is well mixed in the batch mode, it is likely to remain so in the continuous mode, as least for the same reaction. The assumption of instantaneous and perfect mixing remains a reasonable approximation, but the batch reactor has become a continuous-flow stirred tank. 

Continuous Stirred Tanks Without Biomass Recycle. The chemostat without biomass recycle is a classic CSTR. The reactor is started in the batch mode. 

Crameri et al. (1997) have reported an asymmetric hydrogenation constituting an important step in the production of a new calcium antagonist, Mibefradil (POSICOR) (of Hoffmann-LaRoche). Pilot-scale synthesis of (S)-2-(4-flurophenyl)-3-methylbutanoic acid by the asymmetric hydrogenation of 2-(4-fluorophenyl)-3-methyl but-2-enoic acid with a [Ru (/ )-MeOBIPHEP)(OAc)2]-catalyst has been described. The hydrogenation was performed in a continuous mode in a cascade stirred-tank reactor system at a pressure of 270 bar. A large reduction in total reactor volume compared to the batch mode was realized. 

Factors re.sponsible for the occurrence of scale-up effects can be either material factors or size/shape factors. In addition, differences in the mode of operation (batch or semibatch reactor in the laboratory and continuous reactor on the full scale), or the type of equipment (e.g. stirred-tank reactor in the laboratory and packed- or plate- column reactor in commercial unit) can be causes of unexpected scale-up effects. A simple misuse of available tools and information also can lead to wrong effects. 

Influence of the mode of operation on process performance. The mode of operation of stirred-tank reactors can also significantly affect reactor performance. The history of concentrations will be changed by the time policy of reactant(s) addition to the reaction mixture. In view of our very limited possibility of controlling of temperature in stirred-tank reactors, the temperature-time dependencies for different policies of dosing will also be different. For example, the result of nitration depends upon the method of addition of nitric acid to aromatics, and the choice which phase is dispersed and which is continuous. Consequently, if the reaction is concentration- or temperature-sensitive the result will be dependent on the mode of operation (see Example 5.3.1.5). 

The esterification process can be carried out in either batch or continuous mode, the final decision depending most likely on the size of the flow rates involved. For most commercial sizes of 15 MM gal/yr or higher, the continuous process is probably more cost effective and for this option, two additional options are available continuous stirred tank reactor (CSTR) or a fixed-bed reactor (FBR). 

Stirred-tank reactors can be operated in batch, semi-batch, or continuous mode. In batch or semi-batch mode ... 

The ideal tank reactor is one in which stirring is so efficient that the contents are always uniform in composition and temperature throughout. The simple tank reactor may be operated in a variety of modes batch, semibatch, and continuous flow. These modes are illustrated schematically in Figure 8.1. In the simple batch reactor the fluid elements will all have the same composition, but the composition will be time dependent. The stirred tank reactor may also be... 

There are a variety of limiting forms of equation 8.0.3 that are appropriate for use with different types of reactors and different modes of operation. For stirred tanks the reactor contents are uniform in temperature and composition throughout, and it is possible to write the energy balance over the entire reactor. In the case of a batch reactor, only the first two terms need be retained. For continuous flow systems operating at steady state, the accumulation term disappears. For adiabatic operation in the absence of shaft work effects the energy transfer term is omitted. For the case of semibatch operation it may be necessary to retain all four terms. For tubular flow reactors neither the composition nor the temperature need be independent of position, and the energy balance must be written on a differential element of reactor volume. The resultant differential equation must then be solved in conjunction with the differential equation describing the material balance on the differential element. 

Chemical reactors intended for use in different processes differ in size, geometry and design. Nevertheless, a number of common features allows to classify them in a systematic way [3], [4], [9]. Aspects such as, flow pattern of the reaction mixture, conditions of heat transfer in the reactor, mode of operation, variation in the process variables with time and constructional features, can be considered. This work deals with the classification according to the flow pattern of the reaction mixture, the conditions of heat transfer and the mode of operation. The main purpose is to show the utility of a Continuous Stirred Tank Reactor (CSTR) both from the point of view of control design and the study of nonlinear phenomena. 

The chemical reactor is the unif in which chemical reactions occur. Reactors can be operated in batch (no mass flow into or out of the reactor) or flow modes. Flow reactors operate between hmits of completely unmixed contents (the plug-flow tubular reactor or PFTR) and completely mixed contents (the continuous stirred tank reactor or CSTR). A flow reactor may be operated in steady state (no variables vary with time) or transient modes. The properties of continuous flow reactors wiU be the main subject of this course, and an alternate title of this book could be Continuous Chemical Reactors. The next two chapters will deal with the characteristics of these reactors operated isothermaUy. We can categorize chemical reactors as shown in Figure 2-8. 

Figure 11.9 Different arrangements and modes of operation for membrane bioreactors Continuous Stirred Tank Reactor (CSTR) with recirculation arrangement (a), dead-end cell (b), tubular with entrapped enzyme (c).

Biochemical reactors can be operated either batchwise or continuously, as noted in Section 1.5. Figure 7.1 shows, in schematic form, four modes of operation with two types of reactors for chemical and/or biochemical reactions in Uquid phases, with or without suspended solid particles, such as catalyst particles or microbial cells. The modes of operation include stirred batch stirred semi-batch continuous stirred and continuous plug flow reactors (PFRs). In the first three types, the contents of the tanks arc completely stirred and uniform in composition. 

Figure 7.1 Modes of reactor operation (a) batch reactor, (b) semi-batch reactor, (c) continuous stirred-tank reactor, and (d) continuous plug flow reactor.

An analysis based on reaction kinetics suggests that up to 50% of manufacturing reaction steps in the fine chemical and pharmaceutical industries could benefit from being run continuously rather than in batch mode in a stirred tank reactor... 

Figure 1-2 Operating parameters necessary for ozone mass balance(s) on a continuous-flow stirred tank reactor (for operation in semi-batch mode Ol - 0).

The other mode of flow reaction employs one or more stirred tanks in series, which is called a continuous stirred tank (CSTR) battery. The rate of reaction in a single tank is... 

Fig. 1.9. Continuous stirred-tank reactor showing steady state operation (a) and two modes of unsteady state operation (b) and (c)...

An attractive property of monolithic reactors is their flexibility of application in multiphase reactions. These can be classified according to operation in (semi)batch or continuous mode and as plug-flow or stirred-tank reactor or, according to the contacting mode, as co-, counter-, and crosscurrent. In view of the relatively high flow rates and fast responses in the monolith, transient operations also are among the possibilities. 

The mode of random surface renewal exists for a surface that is in the main body of a suspension and is continually contacted by rising bubbles. The age distribution of elements on the surface is represented by that of a continuous-stirred tank reactor (CSTR), as given by... 

There are five primary reactor designs based in theory batch, semibatch, continuous-stirred tank, plug flow, and fluidized bed. The operating expressions for these reactors are derived from material and energy balances, and each represents a specific mode of operation. Selected reactor configurations are presented in Fig. 1. 

The semibatch reactor is a cross between an ordinary batch reactor and a continuous-stirred tank reactor. The reactor has continuous input of reactant through the course of the batch run with no output stream. Another possibility for semibatch operation is continuous withdrawal of product with no addition of reactant. Due to the crossover between the other ideal reactor types, the semibatch uses all of the terms in the general energy and material balances. This results in more complex mathematical expressions. Since the single continuous stream may be either an input or an output, the form of the equations depends upon the particular mode of operation. 

The slurry tank, when well mixed, can be considered a continuous-stirred tank reactor for both the gas phase and the liquid phase. When the solid is retained in the reaction vessel, it behaves in a batch mode however, catalyst can be removed and regenerated easily in a slurry tank, so activity can be maintained. 

In this operation mode, it is possible to mitigate the major limitation of continuous cultures, that is, the low productivity due to the loss of cells in the bioreactor outlet. In perfusion, this issue is overcome by using a cell retention device to maintain cells inside the bioreactor. Figure 9.17 shows a scheme of a stirred-tank bioreactor operating in perfusion mode, as well as the kinetic behavior of a perfusion run. 

Agitated Stirred Tanks Stirred tanks are common gas-liquid reactors. Reaction requirements dictate whether the gas and liquid are in a batch or continuous mode. For a liquid-phase reaction with a long time constant, a batch mode may be used. The reactor is filled with liquid, and gas is continuously fed into the reactor to maintain pressure. If by-product gases form, these gases may need to be purged continuously, if gas solubility is limiting, a higher-purity gas may be continuously fed (and, if required, recycled). As the liquid residence time decreases, product may be continuously removed as well. A... 

---