Stability mechanism

Stabilization Mechanism. Zinc and cadmium salts react with defect sites on PVC to displace the labHe chloride atoms (32). This reaction ultimately leads to the formation of the respective chloride salts which can be very damaging to the polymer. The role of the calcium and/or barium carboxylate is to react with the newly formed zinc—chlorine or cadmium—chlorine bonds by exchanging ligands (33). In effect, this regenerates the active zinc or cadmium stabilizer and delays the formation of significant concentrations of strong Lewis acids. 

Relatively few processible polyimides, particularly at a reasonable cost and iu rehable supply, are available commercially. Users of polyimides may have to produce iutractable polyimides by themselves in situ according to methods discussed earlier, or synthesize polyimides of unique compositions iu order to meet property requirements such as thermal and thermoxidative stabilities, mechanical and electrical properties, physical properties such as glass-transition temperature, crystalline melting temperature, density, solubility, optical properties, etc. It is, therefore, essential to thoroughly understand the stmcture—property relationships of polyimide systems, and excellent review articles are available (1—5,92). 

Copper Corrosion Inhibitors. The most effective corrosion inhibitors for copper and its alloys are the aromatic triazoles, such as benzotriazole (BZT) and tolyltriazole (TTA). These compounds bond direcdy with cuprous oxide (CU2O) at the metal surface, forming a "chemisorbed" film. The plane of the triazole Hes parallel to the metal surface, thus each molecule covers a relatively large surface area. The exact mechanism of inhibition is unknown. Various studies indicate anodic inhibition, cathodic inhibition, or a combination of the two. Other studies indicate the formation of an insulating layer between the water surface and the metal surface. A recent study supports the idea of an electronic stabilization mechanism. The protective cuprous oxide layer is prevented from oxidizing to the nonprotective cupric oxide. This is an anodic mechanism. However, the triazole film exhibits some cathodic properties as well. 

In the case of emulsions with three liquids the presence of the third phase results in a reduction of the energy input for the emulsification process, whereas the emulsion with a Hquid crystal as the third phase shows interesting stabilization mechanisms. Finally, the emulsion with added particles illustrates the importance of Hquid—solid wetting for stabiHty. 

Gas Burners Gas burners may be classified as premixed or non-premixed. Many types of flame stabilizer are employed in gas burners (see Fig. 27-32). Bluff body, swirl, and combinations thereof are the predominant stabilization mechanisms. 

Chemical treatments -How organic polymers and inorganic coagulants work to counteract solids stabilization mechanisms and enhance removal of solids from water, and... 

Both the stabilizing mechanisms are limited by the degree of interaction and miscibility between the two unlike polar (PVC) and nonpolar (PBR) phases. 

Y. -C. Chen and R. W. Bilger, Stabilization mechanism of lifted laminar flames in axisymmetric jet flows. Combust. Flame 122 377-399, 2000. 

Takahashi, R and Katta, V.R., Reaction kernel structure and stabilizing mechanisms of jet diffusion flames in microgravity, Proc. Combust. Inst., 29,2509, 2002. 

Two major types of stabilization mechanisms are described for submicron particles (1) charge stabilization, where surface charge forms a repulsive screen that prevents the particles from flocculation, and (2) steric stabilization, where a surface repulsive screen is formed by solvent-compatible flexible polymeric chains attached to the particle s surface. 

A study of these two types of instability is based on the concept that equilibrium can be manifest in various ways, only one of which represents true stability in the thermodynamic sense. The major objectives are to interpret these types of instability in terms of three recognized stabilization mechanisms operating at the solid-liquid interface, and to indicate the limits within which a system can have all of the outward appearances of true stability without being at its minimum energy. 

Because stability depends on the ability of the particles to remain at discrete distances from each other, the well-known relation described by Morse (5) can be used as a starting point for stabilization mechanisms. As shown in Figure 3, two uncharged (and nonrepelling) bodies approach each other until they have attained an equilibrium distance corresponding to the position of minimum energy. The solid line actually represents a compromise between the repulsive forces operative between two atoms when their electron clouds overlap and the attraction which always exists between two bodies. 

The emphases of future investigation on these unprotected metal nanoclusters should be mainly placed on (1) further controlling the size, composition and shape of the unprotected metal or alloy nanoclusters (2) better understanding the stabilizing mechanism of the unprotected metal nanoclusters in colloidal solutions prepared by the alkaline EG synthesis method (3) developing novel catalytic and other functional systems for real applications. 

In order to understand the observed shift in oxidation potentials and the stabilization mechanism two possible explanations were forwarded by Kotz and Stucki [83], Either a direct electronic interaction of the two oxide components via formation of a common 4-band, involving possible charge transfer, gives rise to an electrode with new homogeneous properties or an indirect interaction between Ru and Ir sites and the electrolyte phase via surface dipoles creates improved surface properties. These two models will certainly be difficult to distinguish. As is demonstrated in Fig. 25, XPS valence band spectroscopy could give some evidence for the formation of a common 4-band in the mixed oxides prepared by reactive sputtering [83],... 

More direct and successful methods for the preparation of non-aqueous metal sols are desirable. Especially valuable would be a method that avoids the metal salt reduction step (and thus avoids contamination by other reagents), avoids electrical discharge methods which decompose organic solvents, and avoids macromolecule stabilization. Such a method would provide pure, non-aqueous metal colloids and should make efficient use of precious metals employed. Such colloids would be valuable technologically in many ways. They would also be valuable to study so that more could be learned about particle stabilization mechanisms in non-aqueous media, of which little is known at the present time. 

---