Spectrometry, inductively coupled

Numerous methods have been pubUshed for the determination of trace amounts of tellurium (33—42). Instmmental analytical methods (qv) used to determine trace amounts of tellurium include atomic absorption spectrometry, flame, graphite furnace, and hydride generation inductively coupled argon plasma optical emission spectrometry inductively coupled plasma mass spectrometry neutron activation analysis and spectrophotometry (see Mass spectrometry Spectroscopy, optical). Other instmmental methods include polarography, potentiometry, emission spectroscopy, x-ray diffraction, and x-ray fluorescence. 

In modern times, most analyses are performed on an analytical instrument for, e.g., gas chromatography (GC), high-performance liquid chromatography (HPLC), ultra-violet/visible (UV) or infrared (IR) spectrophotometry, atomic absorption spectrometry, inductively coupled plasma mass spectrometry (ICP-MS), mass spectrometry. Each of these instruments has a limitation on the amount of an analyte that they can detect. This limitation can be expressed as the IDL, which may be defined as the smallest amount of an analyte that can be reliably detected or differentiated from the background on an instrument. 

Inductively Coupled Plasma Mass Spectrometry Inductively Coupled Plasma Optical Emission Spectrometry Ion Cyclotron Resonance Ion Diffraction... 

Tsolakidou, A. and Kilikoglou, V. (2002). Comparative analysis of ancient ceramics by neutron activation analysis, inductively coupled plasma-optical emission spectrometry, inductively coupled plasma-mass spectrometry, and X-ray fluorescence. Analytical and... 

In 1C, the election-detection mode is the one based on conductivity measurements of solutions in which the ionic load of the eluent is low, either due to the use of eluents of low specific conductivity, or due to the chemical suppression of the eluent conductivity achieved by proper devices (see further). Nevertheless, there are applications in which this kind of detection is not applicable, e.g., for species with low specific conductivity or for species (metals) that can precipitate during the classical detection with suppression. Among the techniques that can be used as an alternative to conductometric detection, spectrophotometry, amperometry, and spectroscopy (atomic absorption, AA, atomic emission, AE) or spectrometry (inductively coupled plasma-mass spectrometry, ICP-MS, and MS) are those most widely used. Hence, the wide number of techniques available, together with the improvement of stationary phase technology, makes it possible to widen the spectrum of substances analyzable by 1C and to achieve extremely low detection limits. 

Coal contains several elements whose individual concentrations are generally less than 0.01%. These elements are commonly and collectively referred to as trace elements. These elements occur primarily as part of the mineral matter in coal. Hence, there is another standard test method for determination of major and minor elements in coal ash by ICP-atomic emission spectrometry, inductively coupled plasma mass spectrometry, and graphite furnace atomic absorption spectrometry (ASTM D-6357). The test methods pertain to the determination of antimony, arsenic, beryllium, cadmium, chromium, cobalt, copper, lead, manganese, molybdenum, nickel, vanadium, and zinc (as well as other trace elements) in coal ash. 

In an interlab oratory study involving 160 accredited hazardous materials laboratories reported by Kimbrough and Wakakuwa [28], each laboratory performed a mineral acid digestion on five soils spiked with arsenic, cadmium, molybdenum, selenium and thallium. Analysis of extracts was carried out by atomic emission spectrometry, inductively-coupled plasma mass spectrometry, flame atomic absorption spectrometry and hydride generation atomic absorption spectrometry. 

IATA ICAP ICP ICP-AES ICP-MS ICV ID IDL IDW ISO International Air Transportation Association inductively coupled argon plasma inductively coupled plasma inductively coupled plasma-atomic emission spectrometry inductively coupled plasma-mass spectrometry initial calibration verification identification instrument detection limit investigation-derived waste International Standardization Organization... 

This multiauthored book aims at highlighting the role played by atomic and mass spectrometry (with particular reference to atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry) in supporting and promoting research and control of foodstuffs and food commodities as regards both essential and potentially toxic chemical elements. The progress made so far in this field is overviewed and emphasis is put on the open problems that require further investment and development in the public and private sectors. 

Hi) Methods based on mass spectrometry Spark-source mass spectrometry Glow-discharge mass spectrometry Inductively coupled-plasma mass spectrometry Electro-thermal vaporization-lCP-MS Thermal-ionization mass spectrometry Accelerator mass spectrometry Secondary-ion mass spectrometry Secondary neutral mass spectrometry Laser mass spectrometry Resonance-ionization mass spectrometry Sputter-initiated resonance-ionization spectroscopy Laser-ablation resonance-ionization spectroscopy... 

The techniques of final determination were electrothermal atomic absorption spectrometry, flame atomic absorption spectrometry, inductively coupled plasma emission spectrometry, and inductively coupled plasma mass spectrometry. 

Hence, it is important to have test methods that can determine metals, both at trace levels and at major concentrations. Thus test methods have evolved that are used for the determination of specific metals as well as the multielement methods of determination using techniques such as atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry, and X-ray fluorescence spectroscopy. 

MEASUREMENT METHODS Particulate filter acid atomic adsorption spectrometry inductively coupled plasma. 

Keywords Trace elements Radionuclides Environment Water Soil Aerosol Plant Neutron activation analysis Atomic absorption spectrometry Inductively coupled plasma-atomic emission spectroscopy Inductively coupled plasma-mass spectrometry X-ray fluorescence Electrochemical methods Speciation... 

The objective of this symposium and this book is to acquaint the readers with the latest advances in the field of elemental analysis and to focus on what avenues of future research to explore in this area. The subjects included are various elemental analysis techniques such as atomic absorption spectrometry, inductively coupled plasma emission and mass spectrometry, isotope dilution mass spectrometry. X-ray fluorescence, ion chromatography, gas chromatography-atomic emission detection, other hyphenated techniques, hetero-atom microanalysis, sample preparation, reference materials, and other subjects related to matrices such as petroleum products, lubricating oils and additives, crude oils, used oils, catalysts, etc. 

See also Atomic Emission Spectrometry Inductively Coupled Plasma. Atomic Mass Spectrometry Inductively Coupled Plasma. Liquid Chromatography Overview. Mass Spectrometry Eiectrospray. 

---