Sodium radioactive

Fig. in-12. Verification of the Gibbs equation by the radioactive trace method. Observed (o) and calculated (line) values for for aqueous sodium dodecyl sulfate solutions. (From Ref. 108.)... 

Tajima and co-workers [108] determined the surface excess of sodium dode-cyl sulfate by means of the radioactivity method, using tritiated surfactant of specific activity 9.16 Ci/mol. The area of solution exposed to the detector was 37.50 cm. In a particular experiment, it was found that with 1.0 x 10" Af surfactant the surface count rate was 17.0 x 10 counts per minute. Separate calibration showed that of this count was 14.5 X 10 came from underlying solution, the rest being surface excess. It was also determined that the counting efficiency for surface material was 1.1%. Calculate F for this solution. 

In a classic expenment Edward Hughes (a colleague of Ingold s at University College Lon don) studied the rate of racemization of 2 lodooctane by sodium iodide in acetone and compared It with the rate of incorporation of radioactive iodine into 2 lodooctane... 

Potassium is analyzed in chemicals that are used in the fertilizer industry and in finished fertilizers by flame photometric methods (44) or volumetric sodium tertraphenylboron methods (45) as approved by the AO AC. Gravimetric deterrnination of potassium as K2PtClg, known as the Lindo-Gladding method (46), and the wet-digestion deterrnination of potassium (47) have been declared surplus methods by the AO AC. Other methods used for control purposes and special analyses include atomic absorption spectrophotometry, inductively coupled plasma (icp) emission spectrophotometry, and a radiometric method based on measuring the radioactivity of the minute amount of the isotope present in all potassium compounds (48). 

The radioactive isotopes available for use as precursors for radioactive tracer manufacturing include barium [ C]-carbonate [1882-53-7], tritium gas, p2p] phosphoric acid or pP]-phosphoric acid [15364-02-0], p S]-sulfuric acid [13770-01 -9], and sodium [ I]-iodide [24359-64-6]. It is from these chemical forms that the corresponding radioactive tracer chemicals are synthesized. [ C]-Carbon dioxide, [ C]-benzene, and [ C]-methyl iodide require vacuum-line handling in weU-ventilated fume hoods. Tritium gas, pH]-methyl iodide, sodium borotritide, and [ I]-iodine, which are the most difficult forms of these isotopes to contain, must be handled in specialized closed systems. Sodium p S]-sulfate and sodium [ I]-iodide must be handled similarly in closed systems to avoid the Uberation of volatile p S]-sulfur oxides and [ I]-iodine. Adequate shielding must be provided when handling P P]-phosphoric acid to minimize exposure to external radiation. 

Synthetic chemical approaches to the preparation of carbon-14 labeled materials iavolve a number of basic building blocks prepared from barium [ CJ-carbonate (2). These are carbon [ C]-dioxide [ CJ-acetjlene [U— C]-ben2ene, where U = uniformly labeled [1- and 2- C]-sodium acetate, [ C]-methyl iodide, [ C]-methanol, sodium [ C]-cyanide, and [ CJ-urea. Many compHcated radiotracers are synthesized from these materials. Some examples are [l- C]-8,ll,14-eicosatrienoic acid [3435-80-1] inoxn. [ CJ-carbon dioxide, [ting-U— C]-phenyhsothiocyanate [77590-93-3] ftom [ " CJ-acetjlene, [7- " C]-norepinephrine [18155-53-8] from [l- " C]-acetic acid, [4- " C]-cholesterol [1976-77-8] from [ " CJ-methyl iodide, [l- " C]-glucose [4005-41-8] from sodium [ " C]-cyanide, and [2- " C]-uracil [626-07-3] [27017-27-2] from [ " C]-urea. All syntheses of the basic radioactive building blocks have been described (4). 

Cesium isotopes can be recovered from fission products by digestion in nitric acid, and after filtration of waste the radioactive cesium phosphotungstate is precipitated using phosphotungstic acid. This technique can be used to prepare radioactive cesium metal or compounds. Various processes for removal of Cs isotopes from radioactive waste have been developed including solvent extraction using macrocycHc polyethers (62) or crown ethers (63) and coprecipitation with sodium tetraphenylboron (64). 

This system is backed-up by a Standby Liquid Control System (SLCS) that injects sodium pentaborate into the moderator using a positive displacement pump (shown as a piston pump). Steam that originates in the core of a BWR, unlike the primary coolant in a PWR, exits the containment. The closing of the MSIVs isolates the radioactivity from the environment but when this is done, normal heat removal is not possible. The Residual Heat Removal (RHR) system... 

The alkali metals form a homogeneous group of extremely reactive elements which illustrate well the similarities and trends to be expected from the periodic classification, as discussed in Chapter 2. Their physical and chemical properties are readily interpreted in terms of their simple electronic configuration, ns, and for this reason they have been extensively studied by the full range of experimental and theoretical techniques. Compounds of sodium and potassium have been known from ancient times and both elements are essential for animal life. They are also major items of trade, commerce and chemical industry. Lithium was first recognized as a separate element at the beginning of the nineteenth eentury but did not assume major industrial importance until about 40 y ago. Rubidium and caesium are of considerable academic interest but so far have few industrial applications. Francium, the elusive element 87, has only fleeting existence in nature due to its very short radioactive half-life, and this delayed its discovery until 1939. 

In previous works [18-20,23,102] water-soluble polymers such as polyacrylamide (pAM), polysodium acrylate (pAA Na), poly(acrylamide-sodium acrylate) (pAM-AA Na), poly(acrylamide-diallyethylamine-hy-drochloride) (pAM-DAEA-HCl), and poly(acrylamide-sodium acrylate-diallyethylamine-hydrochloride) (pAM-AANa-DAEA-HCl) were used in the recovery of cations and some radioactive isotopes from aqueous solutions. It was found that the floe is formed between the added polymer and ions of the solution in the flocculation process with the formation of a crosslinked structure. The formed cross-linked structure is characterized by [103-105] ... 

In a nuclear power plant, heat must be transferred from the core to the turbines without any transfer of matter. This is because fission and neutron capture generate lethal radioactive products that cannot be allowed to escape from the core. A heat-transfer fluid such as liquid sodium metal flows around the core, absorbing the heat produced by nuclear fission. This hot fluid then flows through a steam generator, where its heat energy is used to vaporize... 

C22-0124. A small amount of NaBr containing the radioactive isotope sodium-24 is dissolved in a hot solution of sodium nitrate containing the naturally occurring nonradioactive isotope sodium-23. The solution is cooled, and sodium nitrate precipitates from the solution. Will the precipitate be radioactive Explain your answer. 

Additional experiments were carried out to examine the formation of toluene from n-heptane When the heptane was labeled with in the 1-position, half the radioactivity was in the methyl group and the other half was in the aromatic ring of the toluene. This clearly indicates that ring formation involves 1,6 or 2,7 closure and excludes the possibility of any interconversion between five membered and six membered rings. Perhaps this is not surprising since the catalyst s acid sites are neutralized by the sodium. 

Huizenga, J. R., Grieger, P. F. Wall, F. T. (1950a). Electrolytic properties of aqueous solutions of polyacrylic add and sodium hydroxide. I. Transference experiments using radioactive sodium. Journal of the American Chemical Society, 72, 2636-42. 

To resolve the problem applying methods of collimated atom beams, equilibrium vapour as well as radioactive isotopes, the Hall effect and measurement of conductivity in thin layers of semiconductor-adsorbents using adsorption of atoms of silver and sodium as an example the relationship between the number of Ag-atoms adsorbed on a film of zinc oxide and the increase in concentration of current carriers in the film caused by a partial ionization of atoms in adsorbed layer were examined. 

---