Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Five-membered

A fundamental set is also called a smallest set. Usually such a smallest set is selected that it also contains the smallest rings the smallest set of smallest rings (SSSR). This makes chemical sense in indane (Figure 2-38a), for example, where only the six- and the five-membered rings are of chemical significance whereas the enveloping nine-membered ring is not. [Pg.56]

It can thus be seen that most of the variation in the data (85.9%) is explained by the fir principal component, with all but a fraction being explained by the first two componeni These two principal components can be plotted as a scatter graph, as shown in Figu 9.33, suggesting that there does indeed seem to be some clustering of the conformatioi of the five-membered ring in this particular data set. [Pg.515]

We will generate the energies for the carbon-hydrogen bond /fen and the carbon-carbon single bond Hix using the five linear alkanes from ethane through hexane as the five-member data base. The equation to be used is... [Pg.89]

Concentrate on the saturated five-membered ring part first. [Pg.80]

Analysis We are clearly going to put carbonyl groups on each side of the five membered ring and disconnect the bond e.g. [Pg.80]

When they treated TM 381 with base (MeO in MeOH) it was in fact 381A which was formed, so five membered rings are better than seven membered rings (J. Org. Chem.. 1976, 41, 2955). [Pg.122]

The N-basicity of the commonly used amines (pyrrolidine > piperidine > morpholine) drops by 2-3 orders of magnitude as a consequence of electron pair delocalization in the corresponding enamines. This effect is most pronounced in morpholino enamines (see table below). Furthermore there is a tendency of the five-membered ring to form an energetically favorable exocyclic double bond. This causes a much higher reactivity of pyrroUdino enamines as compared to the piperidino analogues towards electrophiles (G.A. Cook, 1969). [Pg.13]

Versatile [3 + 2]-cydoaddition pathways to five-membered carbocydes involve the trimethylenemethane (= 2-methylene-propanediyl) synthon (B.M. Trost, 1986). Palladium(0)-induced 1,3-elimination at suitable reagents generates a reactive n -2-methylene-l,3-propa-nediyl complex which reacts highly diastereoselectively with electron-deficient olefins. The resulting methylenecyclopentanes are easily modified, e. g., by ozonolysis, hydroboration etc., and thus a large variety of interesting cyclopcntane derivatives is accessible. [Pg.84]

Palladium catalyzed cycloisomerizations of 6-cn-l-ynes lead most readily to five-membered rings. Palladium binds exclusively to terminal C = C triple bonds in the presence of internal ones and induces cyclizations with high chemoselectivity. Synthetically useful bis-exocyclic 1,3-dienes have been obtained in high yields, which can, for example, be applied in Diels-Alder reactions (B.M. Trost, 1989). [Pg.84]

A completely different, important type of synthesis, which was developed more recently, takes advantage of the electrophilicity of nitrogen-containing 1,3-dipolar compounds rather than the nucleophilicity of amines or enamines. Such compounds add to multiple bonds, e.g. C—C, C C, C—O, in a [2 + 3 -cycioaddition to form five-membered heterocycles. [Pg.152]

A few typical examples indicate the large variety of five-membered heterocycles, which can be synthesized efficiently by [2 + 3]-cycloadditions. [2 + 2]-Cycloadditions are useful in the synthesis of certain four-membered heterocycles (H. Ulrich, 1967), e.g. of 8-lactams (J.R. [Pg.152]

The two-bond disconnection (re/ro-cycloaddition) approach also often works very well if the target molecule contains three-, four-, or five-membered rings (see section 1.13 and 2.5). The following tricyclic aziridine can be transformed by one step into a monocyclic amine (W. Nagata, 1968). In synthesis one would have to convert the amine into a nitrene, which-would add spontcaneously to a C—C double bond in the vicinity. [Pg.212]

The isocoumarin 151 is prepared by the intramolecular reaction of 2-(2-propenyDbenzoic acid (149) with one equivalent of PdCbjMeCN) . However, the (Z)-phthalide 150 is obtained from the same acid with a catalytic amount of PdjOAc) under 1 atm of Oi in DMSO, alone is remarkably efficient in reoxidizing Pd(0) in DMSO. The isocoumarin 151 is obtained by the reaction of 2-(l-propenyl)benzoic acid (152) under the same conditions[4], 2-Vinylbenzoic acid (153) is also converted into the isocoumarin 154, but not to the five-membered lactone) 167,170],... [Pg.41]

The carbopalladation of allylamine with malonate affords the chelating complex 510, which undergoes insertion of methyl vinyl ketone to form the amino enone 511[463]. The allylic sulfide 512 has the same chelating effect to give the five-membered complex 513 by carbopalladation[463.464]. [Pg.95]

In the alkylative cyclization of the 1,6-enyne 372 with vinyl bromide, formation of both the five-membered ring 373 by exn mode carbopalladation and isomerization of the double bonds and the six-membered ring 374 by endo mode carbopalladation are observed[269]. Their ratio depends on the catalytic species. Also, the cyclization of the 1,6-enyne 375 with /i-bromostyrene (376) affords the endo product 377. The exo mode cyclization is commonly observed in many cases, and there are two possible mechanistic explanations for that observed in these examples. One is direct endo mode carbopalladation. The other is the exo mode carbopalladation to give 378 followed by cyclopropana-tion to form 379, and the subsequent cyclopropylcarbinyl-homoallyl rearrangement affords the six-membered ring 380. Careful determination of the E or Z structure of the double bond in the cyclized product 380 is crucial for the mechanistic discussion. [Pg.180]

Particularly alkyl halides which have a perfluoroalkyl group at the /3-position undergo smooth carbonylation. Probably the coordination of fluorine to form a five-membered chelate ring accelerates the reaction. Double carbonylation to give the a-keto amide 915 is possible in Et NH with the fluorine-bearing alkyl iodide 914[769,770]. The ester 917 is obtained by the carbonylation of the /3-perfluoroalkyl iodide 916 in ethanol. [Pg.262]

The ligand effect seems to depend on the substrates. Treatment of the prostaglandin precursor 73 with Pd(Ph3P)4 produces only the 0-allylated product 74. The use of dppe effects a [1,3] rearrangement to produce the cyclopen ta-none 75(55]. Usually a five-membered ring, rather than seven-membered, is predominantly formed. The exceptionally exclusive formation of seven-membered ring compound 77 from 76 is explained by the inductive effect of an oxygen adjacent to the allyl system in the intermediate complex[56]. [Pg.302]

The TT-allylpalladium complexes 241 formed from the ally carbonates 240 bearing an anion-stabilizing EWG are converted into the Pd complexes of TMM (trimethylenemethane) as reactive, dipolar intermediates 242 by intramolecular deprotonation with the alkoxide anion, and undergo [3 + 2] cycloaddition to give five-membered ring compounds 244 by Michael addition to an electron-deficient double bond and subsequent intramolecular allylation of the generated carbanion 243. This cycloaddition proceeds under neutral conditions, yielding the functionalized methylenecyclopentanes 244[148], The syn-... [Pg.322]


See other pages where Five-membered is mentioned: [Pg.855]    [Pg.950]    [Pg.2409]    [Pg.266]    [Pg.147]    [Pg.187]    [Pg.188]    [Pg.514]    [Pg.515]    [Pg.138]    [Pg.139]    [Pg.140]    [Pg.141]    [Pg.142]    [Pg.143]    [Pg.144]    [Pg.145]    [Pg.146]    [Pg.147]    [Pg.148]    [Pg.149]    [Pg.130]    [Pg.36]    [Pg.255]    [Pg.25]    [Pg.209]    [Pg.266]    [Pg.315]    [Pg.335]    [Pg.87]    [Pg.252]    [Pg.301]    [Pg.311]   
See also in sourсe #XX -- [ Pg.856 , Pg.857 , Pg.858 , Pg.859 , Pg.860 , Pg.861 , Pg.862 , Pg.863 , Pg.864 ]

See also in sourсe #XX -- [ Pg.171 ]

See also in sourсe #XX -- [ Pg.856 , Pg.857 , Pg.858 , Pg.859 , Pg.860 , Pg.861 , Pg.862 , Pg.863 , Pg.864 ]




SEARCH



© 2024 chempedia.info