Semipermeability

Separation module for a flow Injection analysis using a semipermeable membrane for dialysis and gaseous diffusion. 

Membrane separator. A separator that passes gas or vapor to the mass spectrometer through a semipermeable (e.g., silicon) membrane that selectively transmits organic compounds in preference to carrier gas. Membrane separator, membrane enricher, semipermeable membrane separator, and semipermeable membrane enricher are synonymous terms. 

First, we consider the experimental aspects of osmometry. The semiperme-able membrane is the basis for an osmotic pressure experiment and is probably its most troublesome feature in practice. The membrane material must display the required selectivity in permeability-passing solvent and retaining solute-but a membrane that works for one system may not work for another. A wide variety of materials have been used as membranes, with cellophane, poly (vinyl alcohol), polyurethanes, and various animal membranes as typical examples. The membrane must be thin enough for the solvent to pass at a reasonable rate, yet sturdy enough to withstand the pressure difference which can be... 

Miscellaneous Applications. Ben2otrifluoride derivatives have been incorporated into polymers for different appHcations. 2,4-Dichloroben2otrifluoride or 2,3,5,6-tetrafluoroben2otrifluoride [651-80-9] have been condensed with bisphenol A [80-05-7] to give ben2otrifluoride aryl ether semipermeable gas membranes (336,337). 3,5-Diaminoben2otrifluoride [368-53-6] and aromatic dianhydrides form polyimide resins for high temperature composites (qv) and adhesives (qv), as well as in the electronics industry (338,339). 

Adsorption systems employing molecular sieves are available for feed gases having low acid gas concentrations. Another option is based on the use of polymeric, semipermeable membranes which rely on the higher solubiHties and diffusion rates of carbon dioxide and hydrogen sulfide in the polymeric material relative to methane for membrane selectivity and separation of the various constituents. Membrane units have been designed that are effective at small and medium flow rates for the bulk removal of carbon dioxide. 

Nested wells can also be used to analyze multilayer aquifer flow. There are many situations involving interaquifer transport owing to leaky boundaries between the aquifers. The primary case of interest involves the vertical transport of fluid across a horizontal semipermeable boundary between two or more aquifers. Figure 4 sets out the details of this type of problem. Unit 1 is a phraetic aquifer, bound from below by two confined aquifers, having semipermeable formations at each interface. 

Judging from the hydraulic heads, the vertical flow across the semipermeable interface 1 is in a downward direction, whereas across the semipermeable interface 2 it is in an upward direction. Therefore, unit 2 is being fed by fluid from the phraetic aquifer above it and the confined aquifer below. 

Semipermeable membrane coating (celluose acetate butyrate)... 

For example, the measurements of solution osmotic pressure made with membranes by Traube and Pfeffer were used by van t Hoff in 1887 to develop his limit law, which explains the behavior of ideal dilute solutions. This work led direcdy to the van t Hoff equation. At about the same time, the concept of a perfectly selective semipermeable membrane was used by MaxweU and others in developing the kinetic theory of gases. 

Membrane Sep r tion. The separation of components ofhquid milk products can be accompHshed with semipermeable membranes by either ultrafiltration (qv) or hyperfiltration, also called reverse osmosis (qv) (30). With ultrafiltration (UF) the membrane selectively prevents the passage of large molecules such as protein. In reverse osmosis (RO) different small, low molecular weight molecules are separated. Both procedures require that pressure be maintained and that the energy needed is a cost item. The materials from which the membranes are made are similar for both processes and include cellulose acetate, poly(vinyl chloride), poly(vinyHdene diduoride), nylon, and polyamide (see AFembrane technology). Membranes are commonly used for the concentration of whey and milk for cheesemaking (31). For example, membranes with 100 and 200 p.m are used to obtain a 4 1 reduction of skimmed milk. 

A variety of methods have been devised to stabilize shales. The most successful method uses an oil or synthetic mud that avoids direct contact between the shale and the emulsified water. However, preventing direct contact does not prevent water uptake by the shale, because the organic phase forms a semipermeable membrane on the surface of the wellbore between the emulsified water in the mud and the water in the shale. Depending on the activity of the water, it can be drawn into the shale (activity lower in the shale) or into the mud (activity higher in the shale) (95—97). This osmotic effect is favorable when water is drawn out of the shale thus the aqueous phase of the oil or synthetic mud is maintained at a low water activity by a dding a salt, either sodium chloride or more commonly, calcium chloride. The salt concentration is carried somewhat above the concentration required to balance the water activity in the shale to ensure water movement into the mud. 

Osmotic Pressure Controlled Oral Tablets. Alza Corp. has developed a system that is dependent on osmotic pressure developed within a tablet. The core of the tablet is the water-soluble dmg encapsulated in a hydrophobic, semipermeable membrane. Water enters the tablet through the membrane and dissolves the dmg creating a greater osmotic pressure within the tablet. The dmg solution exits at a zero-order rate through a laser drilled hole in the membrane. Should the dmg itself be unable to provide sufficient osmotic pressure to create the necessary pressure gradient, other water-soluble salts or a layer of polymer can be added to the dmg layer. The polymer swells and pushes the dmg solution through the orifice in what is known as a push-pull system (Fig. 3). The exhausted dmg unit then passes out of the body in fecal matter. 

A reverse osmosis membrane acts as the semipermeable barrier to flow ia the RO process, aHowiag selective passage of a particular species, usually water, while partially or completely retaining other species, ie, solutes such as salts. Chemical potential gradients across the membrane provide the driving forces for solute and solvent transport across the membrane. The solute chemical potential gradient, —is usually expressed ia terms of concentration the water (solvent) chemical potential gradient, —Afi, is usually expressed ia terms of pressure difference across the membrane. 

Reverse Osmosis. Osmosis is the flow of solvent through a semipermeable membrane, from a dilute solution to a concentrated solution. This flow results from the driving force created by the difference in pressure between the two solutions. Osmotic pressure is the pressure that must be added to the concentrated solution side to stop the solvent flow through the membrane. Reverse osmosis is the process of reversing the flow, forcing water through a membrane from a concentrated solution to a dilute solution to produce pure water. Figure 2 illustrates the processes of osmosis and reverse osmosis. 

Silver [7440-22-4] Ag, as an active material in electrodes was first used by Volta, but the first intensive study using silver as a storage battery electrode was reported in 1889 (5) using silver oxide—iron and silver oxide—copper combinations. Work on silver oxide—cadmium followed. In the 1940s, the use of a semipermeable membrane combined with limited electrolyte was introduced by Andrir in the silver oxide—2inc storage battery. 

Silver—Zinc Separators. The basic separator material is a regenerated cellulose (unplastici2ed cellophane) which acts as a semipermeable membrane aHowiag ionic conduction through the separator and preventing the migration of active materials from one electrode to the other. 

The enzyme can be immobilized on the electrode by several techniques (53). The simplest method, first used in 1962, is to trap an enzyme solution between the electrode surface and a semipermeable membrane. Another technique is to immobilize the enzyme in a polymer gel such as polyacrylamide which is coated on the electrode surface. Very thin-membrane films can be obtained by electropolymerization techniques (49,54,55) using polypyrrole, polyindole, or polyphenylenediamine films, among others. These thin films (qv) offer the advantage of improved diffusion of substrate and product that... 

Preparation of aqueous HOCl substantially free of CU from either aqueous CI2 or HOCl—salt solutions has been accompHshed by electro dialysis (qv) using semipermeable membranes (130). This method has limited potential because of the unavailabihty of stable anionic membranes. 

---