Selective oxidation of phenols

Titanium Silicates. A number of titanium siUcate minerals are known (160) examples are Hsted in Table 19. In most cases, it is convenient to classify these on the basis of the connectivity of the SiO building blocks, eg, isolated tetrahedra, chains, and rings, that are typical of siUcates in general. In some cases, the SiO units may be replaced, even if only to a limited extent by TiO. For example, up to 6% of the SiO in the garnet schorlomite can be replaced by TiO. In general, replacement of SiO by TiO bull ding blocks increases the refractive indices of these minerals. Ti has also replaced Si in the framework of various zeofltes. In addition, the catalytic activity of both titanium-substituted ZSM-5 (TS-1) and ZSM-11 (TS-2) has received attention (161), eg, the selective oxidation of phenol, with hydrogen peroxide, to hydroquinone and catechol over TS-1 has been operated at the 10,000 t/yr scale in Italy (162). 

New materials are also finding application in the area of catalysis reiated to the Chemicals industry. For example, microporous [10] materials which have titanium incorporated into the framework structure (e.g. so-calied TS-1) show selective oxidation behaviour with aqueous hydrogen peroxide as oxidizing agent (Figure 5). Two processes based on these new catalytic materials have now been developed and commercialized by ENl. These include the selective oxidation of phenol to catechol and hydroquinone and the ammoxidation of cyclohexanone to e-caproiactam. 

Yube, K. and Furuta, M. and Mae, K. (2007). Selective oxidation of phenol with hydrogen peroxide using two types of catalytic microreactor, Catalysis Today, 125, 56-63. 

The nitrosodisulfonate salts, particularly the dipotassium salt called Fremy s salt, are useful reagents for the selective oxidation of phenols and aromatic amines to quinones (the Teuber reaction). - Dipotassium nitrosodisulfonate has been prepared by the oxidation of a hydroxylaminedisulfonate salt with potassium permanganate, " with lead dioxide, or by electrolysis. This salt is also available commercially. The present procedure illustrates the electrolytic oxidation to form an alkaline aqueous solution of the relatively soluble disodium nitrosodisulfonate. This procedure avoids a preliminary filtration which is required to remove manganese dioxide formed when potassium permanganate is used as the oxidant. " ... 

In 1987, the successful startup of a new process was announced for the production of 10,000 tons/year of catechol and hydroquinone by the selective oxidation of phenol with H202 catalyzed by TS-1 at the Enichem plant in Ravenna, Italy (Notari, 1988). Soon thereafter, it was disclosed that another new process for the production of cyclohexanone oxime from cyclohexanone, H202, and NH3 with TS-1 as the catalyst was being developed (Roffia et al., 1990).The fact that a material with unusual catalytic properties had been obtained was then finally recognized, and the interest in titanium-containing catalysts spread rapidly in the scientific community, especially in industrial research laboratories. In the meantime, the synthesis method was studied and described in more detail and when all the necessary precautions were taken, TS-1 was reproduced in other laboratories, as were the highly selective catalytic reactions. The subsequent work confirmed that Ti v can assume the tetrahedral coordination necessary for isomorphous substitution of SiIV and added valuable information about the structure, properties and catalytic performance of the material. New reactions catalyzed by TS-1 have been discovered, and new synthetic methods... 

Cobalt-Schifi base complexes catalyze the selective oxidation of phenols by dioxygen into quinols (equation 245561) or quinones (equations 246s62,563 and 247561) under mild conditions. 

As an example, the joint analysis of IR and Raman spectra provided evidence of the partial ordering of cations in a Fe-Cr corundum-type mixed sesquioxides, which are used industrially as high temperature water-gas shift catalysts, but are also active in olefin oxidative dehydrogenation. X-ray diffraction (XRD) patterns of these solids indicate the conmdum-type structure without any superstructure. This implies that iron and chromium ions are randomly distributed. IR and Raman spectra instead definitely show that cations are at least partially ordered in layers such as in the ilmenite-type superstructure. Similarly, XRD analysis shows a cubic (non-ferroelectric) structure of nanometric BaTi03, while vibrational spectroscopies reveal microscopic asymmetry of this structure. Similarly, IR spectroscopy allowed the determination of the state of vanadium in solid solution in Ti02 anatase catalysts, and the presence of Ti" + in the silicalite framework of TSl catalysts, " used for the selective oxidation of phenol and the ammoximation of cyclohexanone with hydrogen peroxide. 

The oxidative transformation of phenols is of importance with respect to the biological and synthetic aspects. However, the oxidation of phenols generally lacks selectivity because of coupUng reactions caused by phenoxyl radicals [94], and selective oxidation of phenols is limited to phenols bearing bulky substituents at the 2- and 6-po-sitions [95]. Using ruthenium catalysts, a biomimetic and selective oxidation of phenols can be performed. Thus, the oxidation of p-substituted phenols bearing no sub-... 

Other Methods. A variety of other methods have been studied, including phenol hydroxylation by N2O with HZSM-5 as catalyst (69), selective access to resorcinol from 5-methyloxohexanoate in the presence of Pd/C (70), cyclotrimerization of carbon monoxide and ethylene to form hydroquinone in the presence of rhodium catalysts (71), the electrochemical oxidation of benzene to hydroquinone and -benzoquinone (72), the air oxidation of phenol to catechol in the presence of a stoichiometric CuCl and Cu(0) catalyst (73), and the isomerization of dihydroxybenzenes on HZSM-5 catalysts (74). 

For selective estimation of phenols pollution of environment such chromatographic methods as gas chromatography with flame-ionization detector (ISO method 8165) and high performance liquid chromatography with UV-detector (EPA method 625) is recommended. For determination of phenol, cresols, chlorophenols in environmental samples application of HPLC with amperometric detector is perspective. Phenols and chlorophenols can be easy oxidized and determined with high sensitivity on carbon-glass electrode. 

Nickel peroxide is a solid, insoluble oxidant prepared by reaction of nickel (II) salts with hypochlorite or ozone in aqueous alkaline solution. This reagent when used in nonpolar medium is similar to, but more reactive than, activated manganese dioxide in selectively oxidizing allylic or acetylenic alcohols. It also reacts rapidly with amines, phenols, hydrazones and sulfides so that selective oxidation of allylic alcohols in the presence of these functionalities may not be possible. In basic media the oxidizing power of nickel peroxide is increased and saturated primary alcohols can be oxidized directly to carboxylic acids. In the presence of ammonia at —20°, primary allylic alcohols give amides while at elevated temperatures nitriles are formed. At elevated temperatures efficient cleavage of a-glycols, a-ketols... 

Hensen EJM, Zhu Q, van Santen RA. 2005. Selective oxidation of benzene to phenol with nitrous oxide over MFI zeolites. 2. On the effect of the iron and aluminum content and the preparation route. J Catal 233 136-146. 

Pd(II) Wacker-type catalysts were also studied.146 Selective oxidation of benzene to phenol by molecular oxygen in the presence of Pd and heteropolyacids have been published.147... 

An increased selectivity for phenol in the oxidation of benzene by H202 with TS-1 catalyst in sulfolane solvent was attributed to the formation of a bulky sulfolane-phenol adduct which cannot enter the pores of TS-1. Further oxidation of phenol to give quinones, tar, etc. is thus avoided. Removal of Ti ions from the surface regions of TS-1 crystals by treatment with NH4HF2 and H202 was also found to improve the activity and selectivity (227). The beneficial effects of removal of surface Al ions on the catalytic performance of zeolite catalysts for acid-catalyzed reactions have been known for a long time. 

The nickel hydroxide electrode resembles in its applications and selectivity the chemical oxidant nickel peroxide. The nickel hydroxide electrode is, however, cheaper, easy to use and in scale-up, and produces no second streams/ waste- and by-products [196], Nickelhydroxide electrode has been applied to the oxidation of primary alcohols to acids or aldehydes, of secondary alcohols to ketones, as well as in the selective oxidation of steroid alcohols, cleavage of vicinal diols, in the oxidation of y-ketocarboxylic acids, of primary amines to nitriles, of 2,6-di-tert-butylphenol to 2,2, 6,6 -tetra-rert-butyldiphenoquinone, of 2-(benzylideneamino)-phenols to 2-phenyloxazols, of 1,1-dialkylhydrazines to tetraalkyltetrazenes. For details the reader is referred to Ref. [195]. 

Anodic oxidation of phenols gave the corresponding poly(1,4-phenyleneoxide)s by selecting the electrolysis conditions to prevent passivation of the electrode. 

Q. Zhu, R. M. van Teeffelen, R. A van Santen, and E. J. M. Hensen, Effect of high-temperature treatment on Fe/ZSM-5 prepared by chemical vapor deposition of FeCls 11. Nitrous oxide decomposition, selective oxidation of benzene to phenol, selective reduction of nitrous oxide by MO-butane, J. Catal. 221, 575—583 (2004)... 

Both inter- and intramolecular [5 + 2] cycloaddition modes have been utilized in the synthesis of natural products. Successful intermolecular cycloaddition depends on making an appropriate selection of solvent, supporting electrolyte, oxidation potential, and current density. This is nicely illustrated in Schemes 23 to 25. For example, in methanol the controlled potential oxidation of phenol (101) affords a high yield (87%) of (102), the adduct wherein methanol has intercepted the reactive intermediate [51]. In contrast, a constant current electrolysis conducted in acetonitrile rather than methanol, led to an 83% yield of quinone (103). 

Oxidation of phenols and aromatic amines using HRP is generally of little synthetic value, as oligomers and polymers are the main products (5, 260). Under certain conditions oxidative coupling of phenols or naphthols to give biaryls can be achieved, but with low selectivity (262). In contrast, HRP can catalyze a number of useful oxidative N-and 0-deaIkyIation reactions that are relatively difficult to carry out synthetically. This area has been described in detail by Meunier (263). A method for the preparation of optically active hydroperoxides using HRP C has been developed (264). Optically pure (S)-hydroperoxides... 

Previous studies have used many oxidants for direct phenol synthesis from benzene, such as O2 [74-80], H2O2 [81-89], N2O [90-99], Hj -1- Oj [100, 101], air/ CO [102] and O2/H2O [103], Among these oxidants, the selective oxidation of benzene with economically and environmentally favorable O2 has been nominated as one of the ten most difficult challenges for catalysis [104—106] and, indeed, there have been no reports on the direct phenol synthesis with greater than 5% conversion and 50% selectivity over the last 40 years. 

Selective hydroxylation of phenol with hydrogen peroxide was reported on acid zeolite catalysts [91-92]. Peroxonium ions, formed by H2O2 protonation, are the oxidizing species. When the reaction is carried out on a faujasite catalyst, a mixture of hydroxybenzenes and tars is obtained [91]. In the presence of H-ZSM-5 on the other hand, no tar formation was mentioned (which does not necessarily mean that it was absent) and p-selectivities close to 100% were reported for the hydroxylation [92]. These superior selectivities reflect the shape selective properties of ZSM type zeolites. 

Selective Oxidation of Alkanes, Alkenes, and Phenol with Aqueous H2O2 on Titanium Silicate Molecular Sieves... 

---