Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Risk assessment planning

However, realistically there will always be some differences between the transferring and receiving facilities and remediation together with risk assessment plans, to address the impact of those differences, should be prepared. [Pg.21]

Typical examples of input sources for carrying out a risk assessment plan are [14]... [Pg.667]

Considering the potential use of LAB isolates and their metabolites as antifungal agents to be added directly into food systems, it is critical to understand how these bacteria or metabolites influence, directly or indirectly, the synthesis of mycotoxins. This will become a very important part of risk assessment plans for food systems. [Pg.345]

Risk Assessment Planning Building Codes Zoning Vulnerability Analysis Public Education... [Pg.67]

Planning in accordance with the Policy in order to reduce risks by means of risk assessment, planned safety systems of work, method statements and training, is carried out at pre-tender and contract phases. Four weekly safety meetings allow Health Safety issues to be fully considered outside of commercial constraints. [Pg.49]

The report includes a description of the route, the time of the site visit, the weather conditions, and a list of the team members and others involved. The report identifies road safety issues and risks, together with an informal risk assessment. Plans showing locations with photographs are required, together with a validity statement signed by the... [Pg.174]

An aetion plan for risk assessment is given in Figure 6.2. [Pg.197]

Figure 6.2 Action plan for fire risk assessment... Figure 6.2 Action plan for fire risk assessment...
TRACE II Toxic Release Analysis of Chemical Emissions Safer Emergency Systems, Inc. Darlene Davis Dave Dillehay 756 Lakefield Road Westlake Villa, CA 91361 (818) 707-2777 Models toxic gas and flammable vapor cloud dispersion. Intended for risk assessment and planning purposes, rather than realtime emergencies. [Pg.306]

Transportation should be considered when assessing risks associated with planned or existing plants. The design of new chemical processing units should include at the earliest opportunity a qualitative or quantitative risk assessment of the whole system including production, use, and transportation in order to minimize overall risk. A brief discussion of the inherent safety aspects of transportation is included in Chapter 5. [Pg.4]

The severe accident research program improved public risk assessment, reduced uncertainties, and the reliance on subjective expert opinion. To close two severe accident issues in NRC s Severe Accident Research Plan (NUREG-1365) Mark I Liner Attack and Direct Containment Heating (DCH) were addressed with a new approach using the Risk Oriented Accident Analysis Method (ROAAM) (Theofanous, 1994, 1989). The resolution of the Mark-I Liner Attack issue constitutes the first full demonstration of ROAAM. It emphasizes the determinism and provides a basis for synergistic collaboration among experts through a common communication frame. [Pg.401]

Carry out a risk assessment on your utilities, labor force, and suppliers and prepare contingency plans to minimize effect on business continuity. [Pg.372]

It is important to remember that unexpected benefits may arise from integration. You should actively look for these benefits and document them. It may be possible to improve some of these benefits by small modifications to the plan or integration framework. Such additional work should be undertaken only with the appropriate approvals. Never the less, if any benefits would only be achieved with the integration project, you should include them in your overall statement of benefits. An example of this might be the better allocation of capital to risk reduction efforts when an integrated risk assessment is done-addressing several different types of risk. [Pg.116]

Program Plan for an Integrated Risk Assessment Data Acquisition Program. U. S. Nuclear Regulatory Commission, September 1982. [Pg.237]

These facilities, belonging to one of eight industrial classes, will be required to iinpleinent and document tlie full RMP rule. Tliis will include liazard assessment, preventive steps, emergency preparation and response (see next cliapter) and a risk management plan. ... [Pg.70]

To chanicterize potential disasters by tjpe and extent, a survey of hazards or foreseeable tlireats in die community must be performed and evaluated. Widiout such information, an appropriate plan cannot be developed. An inventory of the community protection assets, liazard sources, and risks must be done before die actual plan is written. The procedures followed here is similar to diat provided in Part IV of this book - Hazard Risk Assessment. [Pg.85]

The potential sources of hazards should be listed for risk assessment. SARA requires certain industries to provide information to the planning committee. Information about snuill as well as large industries is necessary to perinit the committee to evaluate tlie significant risks. Tlie information required by SARA (some of which was provided in Cliapter 2) includes ... [Pg.86]

The risk inventory or risk evaluation is die ne. t part of die hazard survey. It is not practical to expect the plan to cover every potential accident. When die hazards liave been evaluated, die plan should be focused on die most significant ones. This risk assessment stage requires die technical expertise of many people to compare die pieces of data and detennine die relevance of each. Among die important factors to be considered in performing die risk evaluation are die following ... [Pg.87]

To estimate tlie potential iiupaet on tlie publie or tlie environment of aeeidents of different types, the likely emergeney zone must be studied. For example, a liazardous gas leak, fire, or explosion may eause a toxie cloud to spread over a great distance. The minimum atmospheric dispersion model. Vtirious models can be used tlie more difficult models produce more realistic results, but tlie simpler and faster models may provide adequate data for planning purposes. A more tliorough discussion of atmospheric dispersion is presented in Part 111 - Healtli Risk Assessment. [Pg.88]

Risk Assessment - to identify the risk of an EHS accident associated with a particular EHS operation and, if required, determine the likelihood and consequences of the accidental release in order to develop a risk reduction plan that focuses on accident prevention... [Pg.99]

This book is divided into five parts the problem, accidents, health risk, hazard risk, and hazard risk analysis. Part 1, an introduction to HS AM, presents legal considerations, emergency planning, and emergency response. This Part basically ser es as an oveiwiew to the more teclmical topics covered in the remainder of the book. Part 11 treats the broad subject of accidents, discussing fires, explosions and other accidents. The chapters in Parts 111 and Part IV provide introductory material to health and hazard risk assessment, respectively. Pai1 V examines hazaid risk analysis in significant detail. The thiee chapters in this final part include material on fundamentals of applicable statistics theory, and the applications and calculations of risk analysis for real systems. [Pg.661]

The effectiveness of a QA-related independent Part 11 audit is dependent on the checklist or audit plan utilized. Here, provided as a model, is a two-part audit checklist. The depth of the evidence and support required is dependent on the results of the risk assessment All high-, medium-, or low-risk systems should be subject to the same general questions. [Pg.636]

The results of the risk assessment prioritization can be reflected in an organizational validation master plan. Therefore, an organization can demonstrate the sequence in which they intend to address validation activities from a scheduling point of view. [Pg.1060]

The development of CHD is a lifelong process. Except in rare cases of severely elevated serum cholesterol levels, years of poor dietary habits, sedentary lifestyle, and life-habit risk factors (e.g., smoking and obesity) contribute to the development of atherosclerosis.3 Unfortunately, many individuals at risk for CHD do not receive lipid-lowering therapy or are not optimally treated. This chapter will help identify individuals at risk, assess treatment goals based on the level of CHD risk, and implement optimal treatment strategies and monitoring plans. [Pg.176]

Funding for flood protection, early warning, risk assessment, building codes, settlement planning... [Pg.36]


See other pages where Risk assessment planning is mentioned: [Pg.195]    [Pg.92]    [Pg.36]    [Pg.335]    [Pg.195]    [Pg.92]    [Pg.36]    [Pg.335]    [Pg.417]    [Pg.595]    [Pg.326]    [Pg.1]    [Pg.69]    [Pg.361]    [Pg.133]    [Pg.417]    [Pg.595]    [Pg.12]    [Pg.25]    [Pg.167]    [Pg.232]    [Pg.24]    [Pg.598]    [Pg.90]    [Pg.477]    [Pg.175]    [Pg.298]   
See also in sourсe #XX -- [ Pg.386 ]




SEARCH



Assessing planning

Example of a general activity risk assessment record and action plan

Geological Hazards, Risk Assessment and Planning

Risk assessment process action plan

Validation plan risk assessment determinations

© 2024 chempedia.info