Resin properties polystyrenes

Property ASTM Test Phenolics Foamedin Syntactic Place Castable Polyvinyl Chloride Rigid Closed Cell Phenylene Oxide Foamable Resin Polycarbonate Polystyrene Medium-Density Foam Polystyrene Molded Extruded Polyurethane Rigid Closed Cell... 

The high mechanical stability of CLEAR resins allow their use in continous flow reactors as used in solid phase peptide synthesis. The retroacylcarrier protein sequence 74-65 was synthesised successfully in the batch mode on these resins and their properties were compared to resins like polystyrene, polyhipe, PEGA and TentaGel . 

Saytex CP-2000 is widely used for printed wiring boards laminates made from FR4 epoxies. It is reacted into the epoxy, so that there is no potential for leaching out of the resin. The FR meets the German Dioxin Rule. It is environmentally acceptable, thermally stable at high temperatures and does not disrupt resin properties when soldered. It can be used as an additive in ABS and also as a raw material in brominated epoxy oligomers in ABS and high impact polystyrene (HIPS). 

Steam-Chest Expansion. In steam-chest expansion the resin beads in which gas is already present are poured into molds into which steam is injected. The steam increases the temperature close to the melting point and expands within the stmcture to create beads with food cushioning and insulating properties. Expanded polystyrene is widely used in this process for thermal insulation of frozen food packaging. 

The alcohols, proprietary denatured ethyl alcohol and isopropyl alcohol, are commonly used for E-type inks. Many E-type inks benefit from the addition of small amounts of ethyl acetate, MEK, or normal propyl acetate to the solvent blends. Aromatic hydrocarbon solvents are used for M-type inks. Polystyrene resins are used to reduce the cost of top lacquers. T-type inks are also reduced with aromatic hydrocarbons. Acryflc resins are used to achieve specific properties for V-type inks. Vehicles containing vinyl chloride and vinyl acetate copolymer resins make up the vinyl ink category. Ketones are commonly used solvents for these inks. 

Divinylbenzene. This is a specialty monomer used primarily to make cross-linked polystyrene resins. Pure divinylbenzene (DVB) monomer is highly reactive polymericaHy and is impractical to produce and store. Commercial DVB monomer (76—79) is generally manufactured and suppHed as mixtures of m- and -divinylbenzenes and ethylvinylbenzenes. DVB products are designated by commercial grades in accordance with the divinylbenzene content. Physical properties of DVB-22 and DVB-55 are shown in Table 10. Typical analyses of DVB-22 and DVB-55 are shown in Table 11. Divinylbenzene [1321 -74-0] is readily polymerized to give britde insoluble polymers even at ambient temperatures. The product is heavily inhibited with TBC and sulfur to minimize polymerization and oxidation. 

OC-Methylstyrene. This compound is not a styrenic monomer in the strict sense. The methyl substitution on the side chain, rather than the aromatic ring, moderates its reactivity in polymerization. It is used as a specialty monomer in ABS resins, coatings, polyester resins, and hot-melt adhesives. As a copolymer in ABS and polystyrene, it increases the heat-distortion resistance of the product. In coatings and resins, it moderates reaction rates and improves clarity. Physical properties of a-methylstyrene [98-83-9] are shown in Table 12. 

Some commercial durable antistatic finishes have been Hsted in Table 3 (98). Early patents suggest that amino resins (qv) can impart both antisHp and antistatic properties to nylon, acryUc, and polyester fabrics. CycHc polyurethanes, water-soluble amine salts cross-linked with styrene, and water-soluble amine salts of sulfonated polystyrene have been claimed to confer durable antistatic protection. Later patents included dibydroxyethyl sulfone [2580-77-0] hydroxyalkylated cellulose or starch, poly(vinyl alcohol) [9002-86-2] cross-linked with dimethylolethylene urea, chlorotria2ine derivatives, and epoxy-based products. Other patents claim the use of various acryUc polymers and copolymers. Essentially, durable antistats are polyelectrolytes, and the majority of usehil products involve variations of cross-linked polyamines containing polyethoxy segments (92,99—101). 

Phenolics are consumed at roughly half the volume of PVC, and all other plastics are consumed in low volume quantities, mosdy in single apphcation niches, unlike workhorse resins such as PVC, phenoHc, urea—melamine, and polyurethane. More expensive engineering resins have a very limited role in the building materials sector except where specific value-added properties for a premium are justified. Except for the potential role of recycled engineering plastics in certain appHcations, the competitive nature of this market and the emphasis placed on end use economics indicates that commodity plastics will continue to dominate in consumption. The apphcation content of each resin type is noted in Table 2. Comparative prices can be seen in Table 5. The most dynamic growth among important sector resins has been seen with phenoHc, acryUc, polyurethane, LLDPE/LDPE, PVC, and polystyrene. 

Acrylic Resins. The first synthetic polymer denture material, used throughout much of the 20th century, was based on the discovery of vulcanised mbber in 1839. Other polymers explored for denture and other dental uses have included ceUuloid, phenolformaldehyde resins, and vinyl chloride copolymers. Polystyrene, polycarbonates, polyurethanes, and acryHc resins have also been used for dental polymers. Because of the unique combination of properties, eg, aesthetics and ease of fabrication, acryHc resins based on methyl methacrylate and its polymer and/or copolymers have received the most attention since their introduction in 1937. However, deficiencies include excessive polymerization shrinkage and poor abrasion resistance. Polymers used in dental appHcation should have minimal dimensional changes during and subsequent to polymerization exceUent chemical, physical, and color stabiHty processabiHty and biocompatibiHty and the abiHty to blend with contiguous tissues. 

Adhesives, Coatings, and Sealants. Eor these appHcations, styrenic block copolymers must be compounded with resins and oils (Table 10) to obtain the desired properties (56—58). Materials compatible with the elastomer segments soften the final product and give tack, whereas materials compatible with the polystyrene segments impart hardness. The latter are usually styrenic resins with relatively high softening points. Materials with low softening points are to be avoided, as are aromatic oils, since they plasticize the polystyrene domains and reduce the upper service temperature of the final products. 

In the mid-1950s a number of new thermoplastics with some very valuable properties beeame available. High-density polyethylenes produced by the Phillips process and the Ziegler process were marketed and these were shortly followed by the discovery and rapid exploitation of polypropylene. These polyolefins soon became large tonnage thermoplastics. Somewhat more specialised materials were the acetal resins, first introduced by Du Pont, and the polycarbonates, developed simultaneously but independently in the United States and Germany. Further developments in high-impact polystyrenes led to the development of ABS polymers. 

Since the last edition several new materials have been aimounced. Many of these are based on metallocene catalyst technology. Besides the more obvious materials such as metallocene-catalysed polyethylene and polypropylene these also include syndiotactic polystyrenes, ethylene-styrene copolymers and cycloolefin polymers. Developments also continue with condensation polymers with several new polyester-type materials of interest for bottle-blowing and/or degradable plastics. New phenolic-type resins have also been announced. As with previous editions I have tried to explain the properties of these new materials in terms of their structure and morphology involving the principles laid down in the earlier chapters. 

---