Resin acid derivatives

STUDIES ON THE CATALYTIC HYDROGENATION OF RESIN ACIDS DERIVATIVES SYNTHESIS OF A BENZOXAZOLE... 

Further C6o derivatives of menthol include a menthyl malonate adduct119 and a carbamate derived from l,2-epimino[60]fullerene.429 Resin acid derivatives have been prepared by Diels-Alder reaction of C6o with methyl levopi-marate, whose parent acid can be isolated from rosin.430 Finally, a derivative of a-pinene was synthesized in the context of a study on the photochemically induced addition of allyl stannanes to Cr,o, a reaction presumably proceeding via SET from the stannane to the triplet excited fullerene.431... 

Wahlborg found that treatment of the resin acid derivative (3) with the reagent in refluxing collidine not only hydrolyzed the hindered ester function but eliminated the oxide function to produce a diene system. Treatment with Lewis acids had given unpromising mixtures. 

Fig. 3. Structures of resin-acid derivatives with allergenic activity, from modified colophony, a Glycerylmonoabietate firom glycerol-esterified colophony, b Maleopimaric acid from colo-...

The properties of polymers formed by the step growth esterification (1) of glycols and dibasic acids can be manipulated widely by the choice of coreactant raw materials (Table 1) (2). The reactivity fundamental to the majority of commercial resins is derived from maleic anhydride [108-31-6] (MAN) as the unsaturated component in the polymer, and styrene as the coreactant monomer. Propylene glycol [57-55-6] (PG) is the principal glycol used in most compositions, and (i9f2v (9)-phthahc anhydride (PA) is the principal dibasic acid incorporated to moderate the reactivity and performance of the final resins. 

Hardeners and Vulcanizing Ag ents. For epoxy resins, acyUiydrazide derivatives of amino acids are used (245). 

Composition. Rosin is primarily a complex mixture of monocarboxyUc acids of alkylated hydrophenanthrene nuclei. These constituents, known as resin acids, represent about 90% of rosin. The resin acids are subdivided into two types, based on their skeletal stmcture. The abietic-type acids contain an isopropyl group pendent from the carbon numbered 13. The pimaric-type acids have a methyl and vinyl group pendent from the same carbon atom. Figure 1 shows the stmcture of typical resin acids abietic acid, C2QH2QO2 (1) is predominant. The remaining 10% of commercial rosin consists of neutral materials that are either hydrocarbons or saponifiable esters. These materials are derived from resin acids by decarboxylation or esterification. 

Wood is the raw material of the naval stores iadustry (77). Naval stores, so named because of their importance to the wooden ships of past centuries, consist of rosin (diterpene resin acids), turpentine (monoterpene hydrocarbons), and associated chemicals derived from pine (see Terpenoids). These were obtained by wounding the tree to yield pine gum, but the high labor costs have substantially reduced this production in the United States. Another source of rosin and turpentine is through extraction of old pine stumps, but this is a nonrenewable resource and this iadustry is in decline. The most important source of naval stores is spent sulfate pulpiag Hquors from kraft pulpiag of pine. In 1995, U.S. production of rosin from all sources was estimated at under 300,000 metric tons and of turpentine at 70,000 metric tons. Distillation of tall oil provides, in addition to rosin, nearly 128,000 metric tons of tall oil fatty acids annually (78). 

Although in the dry state carbon tetrachloride may be stored indefinitely in contact with some metal surfaces, its decomposition upon contact with water or on heating in air makes it desirable, if not always necessary, to add a smaH quantity of stabHizer to the commercial product. A number of compounds have been claimed to be effective stabHizers for carbon tetrachloride, eg, alkyl cyanamides such as diethyl cyanamide (39), 0.34—1% diphenylamine (40), ethyl acetate to protect copper (41), up to 1% ethyl cyanide (42), fatty acid derivatives to protect aluminum (43), hexamethylenetetramine (44), resins and amines (45), thiocarbamide (46), and a ureide, ie, guanidine (47). 

Carbon, hydrogen and possibly oxygen Resin and derivatives Natural drying oils Cellulose derivatives Alkyd resins Epoxy resins (uncured) Phenol-formaldehyde resins Polystyrene Acrylic resins Natural and synthetic rubbers Carbon monoxide Aldehydes (particularly formaldehyde, acrolein and unsaturated aldehydes) Carboxylic acids Phenols Unsaturated hydrocarbons Monomers, e.g. from polystyrene and acrylic resins... 

The resin acids found in rosins are generally of the abietic- and pimaric-type. Rosins of various pine species differ in their content of abietic vs. pimaric-type acids. Rosins from species exhibiting high abietic-type acid compositions are preferred for production of rosin derivatives. However, the differences in properties of rosins are often associated with their non-resin acid content instead of their chemical compositions. On the other hand, the compositions of rosins from different sources greatly differ [22]. Table 8 shows a typical distribution of resin acids in rosins obtained from gum, tall oil and wood sources. 

Phenolic resins were the first totally synthetic plastics invented. They were commercialized by 1910 [I]. Their history begins before the development of the structural theory of chemistry and even before Kekule had his famous dreams of snakes biting their tails. It commences with Gerhardt s 1853 observations of insoluble resin formation while dehydrating sodium salicylate [2]. These were followed by similar reports on the behavior of salicylic acid derivatives under a variety of reaction conditions by Schroder et al. (1869), Baeyer (1872), Velden (1877), Doebner (1896 and 1898), Speyer (1897) and Baekeland (1909-1912) [3-17]. Many of these early reports appear to involve the formation of phenolic polyesters rather than the phenol-aldehyde resins that we think of today. For... 

Several selective interactions by MIP membrane systems have been reported. For example, an L-phenylalanine imprinted membrane prepared by in-situ crosslinking polymerization showed different fluxes for various amino acids [44]. Yoshikawa et al. [51] have prepared molecular imprinted membranes from a membrane material which bears a tetrapeptide residue (DIDE resin (7)), using the dry phase inversion procedure. It was found that a membrane which contains an oligopeptide residue from an L-amino acid and is imprinted with an L-amino acid derivative, recognizes the L-isomer in preference to the corresponding D-isomer, and vice versa. Exceptional difference in sorption selectivity between theophylline and caffeine was observed for poly(acrylonitrile-co-acrylic acid) blend membranes prepared by the wet phase inversion technique [53]. 

A number of studies have recently been devoted to membrane applications [8, 100-102], Yoshikawa and co-workers developed an imprinting technique by casting membranes from a mixture of a Merrifield resin containing a grafted tetrapeptide and of linear co-polymers of acrylonitrile and styrene in the presence of amino acid derivatives as templates [103], The membranes were cast from a tetrahydrofuran (THF) solution and the template, usually N-protected d- or 1-tryptophan, removed by washing in more polar nonsolvents for the polymer (Fig. 6-17). Membrane applications using free amino acids revealed that only the imprinted membranes showed detectable permeation. Enantioselective electrodialysis with a maximum selectivity factor of ca. 7 could be reached, although this factor depended inversely on the flux rate [7]. Also, the transport mechanism in imprinted membranes is still poorly understood. 

The typical alkyd resin (see above) is eomprised of three basic components an aromatic diacid such as phthalic anhydride which together with a polyol such as glycerol, forms the backbone of the resin molecule and along which are distributed the fatty acids derived from vegetable oils. The solubility, film hardness and colour of alkyd resins depend on the nature of the modifying fatty acid which in most cases contributes some colour to the film. 

Acid derivatives that can be converted to amides include thiol acids (RCOSH), thiol esters (RCOSR), ° acyloxyboranes [RCOB(OR )2]. silicic esters [(RCOO)4Si], 1,1,1-trihalo ketones (RCOCXa), a-keto nitriles, acyl azides, and non-enolizable ketones (see the Haller-Bauer reaction 12-31). A polymer-bound acyl derivative was converted to an amide using tributylvinyl tin, trifluoroacetic acid, AsPh3, and a palladium catalyst. The source of amine in this reaction was the polymer itself, which was an amide resin. 

These catalysts were first tested as resin-bound derivatives via HTS, first with metals and then without. Three libraries of chiral molecules, based on three different enantiomerically pure diamines, bulky salicylidene moities and optically active ii-amino acids were used for structure optimisation (Scheme 37 TBSCN = fBuMe2SiCN) [152]. 

The CB sheet is coated on the back with microcapsules 5 to 10 pm in diameter, in which leuco dye solution in a nonvolatile solvent is contained. The CF sheet is coated on the front with an acidic coreactant such as reactive clay, zinc salt of salicylic acid derivatives, zinc-modified phenolic resin, etc. On the application of pressure, the microcapsule is ruptured in the area delineated by the pressure pattern, and the leuco dye solution is thereby transferred to the CB sheet to bring about a color-forming reaction with acidic coreactant resulting in a distinct image on the surface of the CF sheet. By inserting a middle sheet (or sheets) called the CFB sheet, which is coated on the front and back with acidic coreactant and microcapsules, respectively, multiple copies can be obtained. 

The CF sheet is prepared by coating an acidic coreactant such as naturally occurring reactive clay, zinc salt of salicylic acid derivatives and zinc modified phenolic resin. 

Assist the widely dissimilar ingredients used in a rubber compound to coalesce and mix into a homogeneous uniform processable mass. Homogenisers are low-MW polymeric resin blends. The homogenising resin blend contains portions that are compatible with aliphatic, naphthenic and aromatic parts of the elastomers in a blend and higher-MW homologues of the plasticisers. They have a wetting effect. Fatty acid derivatives and phenolic resins are used. 

Copals, sometimes referred to as immature amber, originate from Africa, Asia or central American countries and derive from the Araucariaceae and Leguminosae families. Polymerised communic acid and agathic acid are found as the main compounds in these fossil resins. The extreme hardness of copal results from polymers of resin acids such as ozoic acid, an enantiomer of communic acid that can polymerize and thus enable fossilization [86]. They are still commonly used today for varnishing and protecting wood. 

---