Recent examples

In the preceding chapters the material necessary for studying photoionization processes in atoms using synchrotron radiation and electron spectrometry was presented. The discussion will now be completed with some examples of current research activities. These include  

---

Stem layer adsorption was involved in the discussion of the effect of ions on f potentials (Section V-6), electrocapillary behavior (Section V-7), and electrode potentials (Section V-8) and enters into the effect of electrolytes on charged monolayers (Section XV-6). More speciflcally, this type of behavior occurs in the adsorption of electrolytes by ionic crystals. A large amount of wotk of this type has been done, partly because of the importance of such effects on the purity of precipitates of analytical interest and partly because of the role of such adsorption in coagulation and other colloid chemical processes. Early studies include those by Weiser [157], by Paneth, Hahn, and Fajans [158], and by Kolthoff and co-workers [159], A recent calorimetric study of proton adsorption by Lyklema and co-workers [160] supports a new thermodynamic analysis of double-layer formation. A recent example of this is found in a study... 

There are higher multipole polarizabilities tiiat describe higher-order multipole moments induced by non-imifonn fields. For example, the quadnipole polarizability is a fourth-rank tensor C that characterizes the lowest-order quadnipole moment induced by an applied field gradient. There are also mixed polarizabilities such as the third-rank dipole-quadnipole polarizability tensor A that describes the lowest-order response of the dipole moment to a field gradient and of the quadnipole moment to a dipolar field. All polarizabilities of order higher tlian dipole depend on the choice of origin. Experimental values are basically restricted to the dipole polarizability and hyperpolarizability [21, 24 and 21]. Ab initio calculations are an imponant source of both dipole and higher polarizabilities [20] some recent examples include [26, 22] ... 

These two references give an excellent overview over the most recent examples in this research field. Callaghan P T 1993 Principles of Nuclear Magnetic Resonance Microscopy (Oxford Clarendon)... 

An especially interesting recent example is Benedetti et al 5 use of circular dicliroism (CD) spectroscopy to detect a pressure-induced change of the configuration at the metal centre of the octahedral chiral A- and A-tris... 

In a more recent example, a shock-tube experiment was used to study the themial decomposition of methylamine between 1500 K and 2000 K [61, 62] ... 

A recent example of laser flash-lamp photolysis is given by Hippier etal [ ], who investigated the temperature and pressure dependence of the thennal recombmation rate constant for the reaction... 

Equilibration of the interface, and the establislnnent of equilibrium between the two phases, may be very slow. Holcomb et al [183] found that the density profile p(z) equilibrated much more quickly than tire profiles of nonnal and transverse pressure, f yy(z) and f jfz), respectively. The surface tension is proportional to the z-integral of Pj z)-Pj z). The bulk liquid in the slab may continue to contribute to this integral, indicatmg lack of equilibrium, for very long times if the initial liquid density is chosen a little too high or too low. A recent example of this kind of study, is the MD simulation of the liquid-vapour surface of water at temperatures between 316 and 573 K by Alejandre et al [184]. 

The vibronic coupling model has been applied to a number of molecular systems, and used to evaluate the behavior of wavepackets over coupled surfaces [191]. Recent examples are the radical cation of allene [192,193], and benzene [194] (for further examples see references cited therein). It has also been used to explain the lack of structure in the S2 band of the pyrazine absoiption spectrum [109,173,174,195], and recently to study the photoisomerization of retina] [196],... 

Conformational free energy simulations are being widely used in modeling of complex molecular systems [1]. Recent examples of applications include study of torsions in n-butane [2] and peptide sidechains [3, 4], as well as aggregation of methane [5] and a helix bundle protein in water [6]. Calculating free energy differences between molecular states is valuable because they are observable thermodynamic quantities, related to equilibrium constants and... 

Within the periodic Hartree-Fock approach it is possible to incorporate many of the variants that we have discussed, such as LFHF or RHF. Density functional theory can also be used. I his makes it possible to compare the results obtained from these variants. Whilst density functional theory is more widely used for solid-state applications, there are certain types of problem that are currently more amenable to the Hartree-Fock method. Of particular ii. Icvance here are systems containing unpaired electrons, two recent examples being the clci tronic and magnetic properties of nickel oxide and alkaline earth oxides doped with alkali metal ions (Li in CaO) [Dovesi et al. 2000]. 

An alternative way to represent molecules is to use a linear notation. A linear notation uses alphanumeric characters to code the molecular structure. These have the advantage of being much more compact than the connection table and so can be particularly useful for transmif-ting information about large numbers of molecules. The most famous of the early line notations is the Wiswesser line notation [Wiswesser 1954] the-SMILES notation is a more recent example that is increasingly popular [Weininger 1988]. To construct the Wiswesser... 

Physical Properties. Raman spectroscopy is an excellent tool for investigating stress and strain in many different materials (see Materlals reliability). Lattice strain distribution measurements in siUcon are a classic case. More recent examples of this include the characterization of thin films (56), and measurements of stress and relaxation in silicon—germanium layers (57). 

Other more recent examples of recreational surfaces or components are artificial turf variations for golf tee mats and croquet, permanent resident base layers replacing asphalt or asphalt and shock-absorbing underpad in artificial turf field instadations, and sand-fided turf... 

More recent examples include end-functionalized multiarmed poly(vinyl ether) (44), MVE/styrene block copolymers (45), and star-shaped polymers (46—48). With this remarkable control over polymer architecture, the growth of future commercial appHcations seems entirely likely. 

A recent example is the substrate analogue thymidine 5 -[a,P-iaiido]triphosphate [141171-20-2] (TMPNPP) (2) which competitively inhibits the human iaimunodeficiency vims-1 (HIV-1) reverse transcriptase (HIV-1 RT) with a iC value of 2.4 micromolar ]lM) (9). The substrate is thymidine 5 -triphosphate... 

There are some recent examples of this type of synthesis of pyridazines, but this approach is more valuable for cinnolines. Alkyl and aryl ketazines can be transformed with lithium diisopropylamide into their dianions, which rearrange to tetrahydropyridazines, pyrroles or pyrazoles, depending on the nature of the ketazlne. It is postulated that the reaction course is mainly dependent on the electron density on the carbon termini bearing anionic charges (Scheme 65) (78JOC3370). 

These difficulties have prompted a search for novel techniques for crystallization of membrane proteins. Two approaches have given promising results one using antibodies to solubilize the proteins and the second using continuous lipidic phases as crystallization media. Complexes with specific antibodies have larger polar surfaces than the membrane protein itself and are therefore likely to form crystals more easily in an aqueous enviroment. A recent example of an antibody-membrane protein complex utilized an Fv... 

Over the years many blends of polyurethanes with other polymers have been prepared. One recent example is the blending of polyurethane intermediates with methyl methacrylate monomer and some unsaturated polyester resin. With a suitable balance of catalysts and initiators, addition and rearrangement reactions occur simultaneously but independently to give interpenetrating polymer networks. The use of the acrylic monomer lowers cost and viscosity whilst blends with 20% (MMA + polyester) have a superior impact strength. 

In this section examples of the application of the various techniques described are presented. The works mentioned have been selected simply to illustrate the wide range of areas of application and in general early rather than more recent examples have been quoted. The reader will find a huge number of other examples in the literature. 

Much work since this period [4] has reinforced the importance of surface topography in these areas of adhesion. Two recent examples will be cited. 

Acrylic adhesives can also be used in automotive assembly. For example, the hem flanges between the inner and outer panel of automotive doors can be bonded with acrylic adhesives [153]. There are many smaller industrial assembly applications where acrylic adhesives are applicable. An interesting recent example is the bonding of cable splice enclosures, using a borane initiated adhesive [154]. 

The selection of methods is not meant to be exhaustive, but important reactions are illustrated by detailed examples and a rationale for the solution of problems of double bond introduction is suggested. An attempt has been made to select references which contain recent examples and useful bibliographies. 

References to recent examples may be found in the reviews of Owyang and Walker. Selenium dioxide has been superseded in most instances by DDQ, which generally gives higher yields and fewer purification problems. 

The reductive elimination of halohydrins provides a means of introduction of double bonds in specific locations, particularly as the halohydrin may be obtained from the corresponding a-halo ketone. This route is one way of converting a ketone into an olefin. (The elimination of alcohols obtainable by reduction has been covered above, and other routes will be discussed in sections IX and X.) An advantage of this method is that it is unnecessary to separate the epimeric alcohols obtained on reduction of the a-bromo ketone, since both cis- and tran -bromohydrins give olefins (ref. 185, p. 251, 271 cf. ref. 272). Many examples of this approach have been recorded. (For recent examples, see ref. 176, 227, 228, 242, 273.) The preparation of an-drost-16-ene (123) is illustrative, although there are better routes to this compound. 

Finally, we want to describe two examples of those isolated polymer chains in a sea of solvent molecules. Polymer chains relax considerably faster in a low-molecular-weight solvent than in melts or glasses. Yet it is still almost impossible to study the conformational relaxation of a polymer chain in solvent using atomistic simulations. However, in many cases it is not the polymer dynamics that is of interest but the structure and dynamics of the solvent around the chain. Often, the first and maybe second solvation shells dominate the solvation. Two recent examples of aqueous and non-aqueous polymer solutions should illustrate this poly(ethylene oxide) (PEO) [31]... 

The responses of halooUfins and halnaromadcs to vanous reducing agents were discussed m the previous section, thus only some recent examples are given here, showing the high selectivity attained with aromatic [39] (equaUon 30), olefinic [40] (equation 31), and heterocychc [41] (equation 32) substrates with retention of the unsaturated centers. 

Coupling reactions and related fluoroalkylations with polytTuoioalkyl halides are induced by vanous reagents, among them metals such as copper and zinc, or by an electrochemical cell. More recently, examples of carbon-carbon bond forma tion by coupling of unsaturated fluorides have been reported Both acyclic and cyclic fluoroolefins of the type (Rp)2C=CFRp undergo reducUve dimerization on treatment with phosphines [42] (equation 33) The reaction shown in equation 33 IS also accompbshed electrocheimcally but less cleanly [43]... 

Trifluoromethanesulfonic (triflic) anhydride is commercially available or can be prepared easily by the reaction of triflic acid with phosphorus pentoxide [66] This moderately hygroscopic colorless liquid is a useful reagent for the preparation of various organic derivatives of triflic acid A large variety of organic ionic triflates can be prepared from triflic anhydride A recent example is the preparation of unusual oxo-bridged dicatiomc salts of different types [SS, 89, 90, 91, 92, 93] (equations 38-44) Stabilized dication ether salts of the Huckel aromatic system and some other systems (equations 38 and 39) can be prepared in one step by the... 

This chapter will provide an overview, illustrated with recent examples, of some applications of the most commonly used physical methods for the characterization of chalcogen-nitrogen compounds. 

Thionyl imide, HNSO, is a thermally unstable gas, which polymerizes readily. It can be prepared by the reaction of thionyl chloride with ammonia in the gas phase. Organic derivatives RNSO have higher thermal stability, especially when R = Ar. The typical synthesis involves the reaction of a primary amine or, preferably, a silylated amine with thionyl chloride. A recent example is the preparation of FcNSO (Fc = ferrocenyl) shown in Eq. 9.8. In common with other thionylimines, FcNSO readily undergoes SO2 elimination in the presence of a base, e.g., KO Bu, to give the corresponding sulfur diimide FcNSNFc. 

---