Crystals forms

On thermal treatment, the 8-form is transformed into the 7-form and then into the a-form. Tsutsui et al. examined in detail solvent removal from the 8-form and found that the solvent was removed without a change of the conformation of SPS [25]. 

The solid state is important for a variety of reasons, summarized in Fig. 1.6 morphology, particle size, polymorphism, solvation or hydration can affect filtration, flow, tableting, dissolution and bioavailability. These are described below. 

Although there may not be significant differences in the bioavailability of dmgs with different crystal habits, the crystal habit is of importance from a technological point of view. The ability to inject a suspension 

Crystallisation from solution can be considered to be the result of three successive processes  

Supersaturation can be achieved by cooling, by evaporation, by the addition of a precipitant or by a chemical reaction that changes the nature of the solute. Supersaturation itself is insufficient to cause crystals to form the crystal embryos must form by collision of molecules of solute in the solution, or sometimes by the addition of seed crystals, or dust particles, or even particles from container walls. Deliberate seeding is often carried out in industrial processes seed crystals do not necessarily have to be of the substance concerned but may be isomorphous substances (i.e. of the same morphology). As soon as stable nuclei are formed, they begin to grow into visible crystals. 

Crystal growth can be considered to be a reverse dissolution process and the diffusion theories of Noyes and Whitney, and of Nemst, consider that matter is deposited continuously on a crystal face at a rate proportional to the difference of concentration between the surface and the bulk solution. So an equation for crystallisation can be proposed in the form 

---

Pu (86 years) is formed from Np. Pu is separated by selective oxidation and solvent extraction. The metal is formed by reduction of PuF with calcium there are six crystal forms. Pu is used in nuclear weapons and reactors Pu is used as a nuclear power source (e.g. in space exploration). The ionizing radiation of plutonium can be a health hazard if the material is inhaled. 

Vanadium Il) bromide, VBr2. Reddish brown crystals formed from VBr3 and H2. 

Two nucleation processes important to many people (including some surface scientists ) occur in the formation of gallstones in human bile and kidney stones in urine. Cholesterol crystallization in bile causes the formation of gallstones. Cryotransmission microscopy (Chapter VIII) studies of human bile reveal vesicles, micelles, and potential early crystallites indicating that the cholesterol crystallization in bile is not cooperative and the true nucleation time may be much shorter than that found by standard clinical analysis by light microscopy [75]. Kidney stones often form from crystals of calcium oxalates in urine. Inhibitors can prevent nucleation and influence the solid phase and intercrystallite interactions [76, 77]. Citrate, for example, is an important physiological inhibitor to the formation of calcium renal stones. Electrokinetic studies (see Section V-6) have shown the effect of various inhibitors on the surface potential and colloidal stability of micrometer-sized dispersions of calcium oxalate crystals formed in synthetic urine [78, 79]. 

See A. F. Wells, The Third Dimension in Chemistry, Clarendon Press, Oxford, 1956, p. 57 and D. W. Thompson, Growth and Crystal Form, Cambridge University Press, Cambridge, England, 1943, p. 551. 

Cobalt is a bluish silvery metal, exhibits ferromagnetism, and can exist in more than one crystal form it is used in alloys for special purposes. Chemically it is somewhat similar to iron when heated in air it gives the oxides C03O4 and CoO, but it is less readily attacked by dilute acids. With halogens, the cobalt(II) halides are formed, except that with fluorine the (III) fluoride, C0F3, is obtained. 

Benzoylpropionitrile. To a mixture of 21 4 g. of p dimethylamino propiophenone hydrochloride, 13 0 g. of potassium cyanide in a 500 ml. flask, add 260 ml. of boiling water heat the heterogeneous mixture under reflux for 30 minutes. Part of the dimethylamine, which is eliminated in the reaction, distils collect this in dilute hydrochloric acid. Cool the reaction mixture in ice the oil sohdifies and crystals form from the aqueous layer. Collect the solid (crude p benzoylpropiouitrile, 10-5 g.) by suction filtration and recrystallise it from benzene - light petroleum (b.p. 40-60°) it separates as almost colourless blades, m.p. 76°. 

Anyway, one has the P2P/crap oil, right Right. Next one makes a saturated sodium bisulfite solution by dissolving as much sodium bisulfite as will dissolve in a given amount of water (say, lOOOmL). Now one adds the MD-P2P oil into some of the saturated solution and stirs for 30 minutes. The temperature of the reaction will rise and a big old mass of P2P crystals will form. People often say that the crystals look like chicken fat. Those crystals formed because the bisulfite from the sodium bisulfite latched onto the ketone of the P2P to form a precipitate. And since the P2P is probably the only oil component with a ketone, it is gonna be the only thing of any consequence that crystallizes. 

Now then, there are some chemists that rely on bisulfite as a tool to physically separate all of their ketone from an oil mix. But some chemists, using some methods, are rightfully sure enough that their ketones were produced in such high yields, and so cleanly, that separation isn t necessary at all. But even they, like anyone else, would still like to know for sure that what they made was P2P. This bisulfite procedure works in this regard as well. If one wants to know if what they made is P2P all one has to do is just drop a mL or so into the saturated bisulfite solution and see what happens. If crystals form, one has ketone. If not, one has fucked up. 

Occasionally an optically inactive sample of tartaric acid was obtained Pasteur noticed that the sodium ammonium salt of optically inactive tartaric acid was a mixture of two mirror image crystal forms With microscope and tweezers Pasteur carefully sep arated the two He found that one kind of crystal (m aqueous solution) was dextrorota tory whereas the mirror image crystals rotated the plane of polarized light an equal amount but were levorotatory... 

Polymer crystals form by the chain folding back and forth on itself, with crystal growth occurring by the deposition of successive layers of these folded chains at the crystal edge. The resulting crystal, therefore, takes on a platelike structure, the thickness of which corresponds to the distance between folds. 

Deviations from the Avrami equation are frequently encountered in the long time limit of the data. This is generally attributed to secondary nucleation occurring at irregularities on the surface of crystals formed earlier. 

Crystallization conditions such as temperature, solvent, and concentration can influence crystal form. One such modification is the truncation of the points at either end of the long diagonal of the diamond-shaped crystals seen in Fig. 4.11b. Twinning and dendritic growth are other examples of such changes of habit. 

Crystal structure of solids. The a-crystal form of TiCla is an excellent catalyst and has been investigated extensively. In this particular crystal form of TiCla, the titanium ions are located in an octahedral environment of chloride ions. It is believed that the stereoactive titanium ions in this crystal are located at the edges of the crystal, where chloride ion vacancies in the coordination sphere allow coordination with the monomer molecules. 

The crystal stmcture of glycerides may be unambiguously determined by x-ray diffraction of powdered samples. However, the dynamic crystallization may also be readily studied by differential scanning calorimetry (dsc). Crystallization, remelting, and recrystallization to a more stable form may be observed when Hquid fat is solidified at a carefully controlled rate ia the iastmment. Enthalpy values and melting poiats for the various crystal forms are shown ia Table 3 (52). 

Insoluble Ammonium Polyphosphate. When ammonium phosphates are heated ia the presence of urea (qv), or by themselves under ammonia pressure, relatively water-iasoluble ammonium polyphosphate [68333-79-9] is produced (49). There are several crystal forms and the commercial products, avaUable from Monsanto, Albright WUson, or Hoechst-Celanese, differ ia molecular weight, particle size, solubUity, and surface coating. Insoluble ammonium polyphosphate consists of long chains of repeating 0P(0)(0NH units. 

The fluoride ion is the least polarizable anion. It is small, having a diameter of 0.136 nm, 0.045 nm smaller than the chloride ion. The isoelectronic E and ions are the only anions of comparable size to many cations. These anions are about the same size as K" and Ba " and smaller than Rb" and Cs". The small size of E allows for high coordination numbers and leads to different crystal forms and solubiUties, and higher bond energies than are evidenced by the other haUdes. Bonds between fluorine and other elements are strong whereas the fluorine—fluorine bond is much weaker, 158.8 kj/mol (37.95 kcal/mol), than the chlorine—chlorine bond which is 242.58 kJ/mol (57.98 kcal/mol). This bond weakness relative to the second-row elements is also seen ia 0-0 and N—N single bonds and results from electronic repulsion. 

Properties. Other names for potassium bifluoride are potassium hydrogen difluoride and potassium acid fluoride. This white crystalline salt is a soft, waxy soHd. The crystal forms of potassium bifluoride are tetragonal and cubic (21). The bifluoride ion in KHF2 averages 0.2292 nm between fluoride... 

Poly(vinyl fluoride) [24981-14-4] (PVF) is a semicrystaltiae polymer with a planar, zig-zag configuration (50). The degree of crystallinity can vary significantly from 20—60% (51) and is thought to be primarily a function of defect stmctures. Wide-line nmr and x-ray diffraction studies show the unit cell to contain two monomer units and have the dimensions of a = 0.857 nm, b = 0.495 nm, and c = 0.252 nm (52). Similarity to the phase I crystal form of poly (vinytidene fluoride) suggests an orthorhombic crystal (53). 

Compound CAS RegistryNumber Crystal form Compound CAS RegistryNumber Crystal form... 

Liquid crystals may be divided into two broad categories, thermotropic and lyotropic, according to the principal means of breaking down the complete order of the soHd state. Thermotropic Hquid crystals result from the melting of mesogenic soHds due to an increase in temperature. Both pure substances and mixtures form thermotropic Hquid crystals. In order for a mixture to be a thermotropic Hquid crystal, the different components must be completely miscible. Table 1 contains a few examples of the many Hquid crystal forming compounds (2). Much more is known about calamitic (rod-Hke) Hquid crystals then discotic (disk-like) Hquid crystals, since the latter were discovered only recendy. Therefore, most of this section deals exclusively with calamities, with brief coverage of discotics at the end. 

---