Properties gloss

Evaluations of furniture polish application properties, gloss, uniformity, film clarity, smear and mar resistance, film healing, buffability, cleaning, water spotting, gloss retention, and dust attraction are all described in ASTM D3751-79. Federal Specification P-P553B (1977) indudes some standard test methods for the evaluation of liquid furniture polishes. 

Oligophenylethoxysiloxanes are used as modifiers for various polymers to improve their weather resistance and other technical characteristics, as well as to increase the heat resistance of coatings. E.g., PES-50 is used to modify polyethers, aciylic and epoxy polymers PES-80 is used to modify alkyd and urea-formaldehyde resins. Besides, PES-80 is used as an additive in paints and enamels (to improve their flow properties, gloss and colour), as well as in concrete mixes (to improve the water resistance and durability of concrete works). 

CUSTOMER RESIN PROPERTIES GLOSS HEAT STABILITY... 

Outstanding properties Gloss retention, durability, weatherability... 

Graph 27-07. Optical properties gloss of various polyethylenes and ExxonMobil Exceed mLLDPE.i > i... 

Surfmers , i.e. surfactants which also acted as copolymerisable monomers, were synthesised from the hemi-ester of a fatty alcohol and maleic anhydride and were then used in the preparation of self-crosslinking dispersions by seeded semi-continuous emulsion polymerisation of acrylate monomers. Water-borne exterior wood stains were prepared from the dispersions and their properties were studied. The use of surfmers as sole emulsifiers in emulsion polymerisation was considered and data were obtained on the effects of surfmers on film formation, water barrier properties, gloss retention and mechanical properties. Environmental aspects of the use of products involving surfmers were examined. 6 refs. 

Compression moulded parts usually possess high rigidity and strength (tensile, compression and impact) along with good surface properties (gloss, smoothness, paintability), and in principle, the thickness of compression parts are not limited in size (in contrast to injection moulding). 

Keywords biaxial orientation, film blowing, film tentering, structure of oriented PP, mechanical properties of oriented PP, BOPP, packaging, cast film, tubular film, inflation film, amorphous orientation, crystalline orientation, morphology, haze, optical properties, gloss, shrinkage, permeability... 

Outstanding properties - gloss, low water resistance, scratch resistance ... 

Glycerol is the workhorse polyol of alkyds, closely followed by penta-erythritol. Mixtures of pentaerythritol and ethylene glycol are used quite extensively in the preparation of medium- and short-oil alkyds containing 30-50% fatty acids. These resins exhibit better compatibility properties, gloss retention, and... 

Unstabilised PE very rapidly becomes brittle when exposed (prolonged exposure) to sunlight, caused mainly by UV radiation. Degradation is accompanied by marked deterioration in mechanical properties, gloss loss, and cracking. 

Surface properties (gloss, scratch resistance, etc.) are modified... 

SAN resins possess many physical properties desked for thermoplastic appHcations. They are characteristically hard, rigid, and dimensionally stable with load bearing capabiHties. They are also transparent, have high heat distortion temperatures, possess exceUent gloss and chemical resistance, and adapt easily to conventional thermoplastic fabrication techniques (7). 

Optical. The optical properties of fillers and the influence that fillers have on the optical properties of filled systems are often misunderstood. The key parameters in understanding the optical properties of fillers themselves are filler psd, color, and index of refraction. These characteristics influence the optical properties of filled composition, such as color, brightness, opacity, hiding power, and gloss. 

Gloss, or surface luster, is the property of a surface to reflect light specularly. It is associated with such phenomena as shininess, highlight, and reflected images. The gloss of paper is usually quantified with a spectrophotometer which measures light at a variety of angles of incidence and reflection. 

In addition to polyamide, lamination inks ordinarily contain modifiers such as polyketone resin, plasticizer, and wax to impart specific properties such as block resistance and increased bond strength. Because laminating inks are usually reverse-side printed and end-up sandwiched between films, gloss is not a primary requirement. Water-base laminating inks that will meet the U.S. EPA emission requirements and have the correct functional properties are currently under development. 

Aesthetic properties are of greatest concern in decorative laminates. These include gloss, appearance, cleanabiUty, wear resistance, stain resistance, and other surface properties. Physical properties are of most importance for industrial laminates. These include strength, electrical and thermal properties, expansion coefficient, and punchabiUty. The definitions of the laminate grades in these standards foUow. 

Miscellaneous Types. Various decorative effects have been developed which meet specific aesthetic requirements. These laminates may have special visual appeal, such as gloss finish, deeply embossed textures, and metallic surfaces. They are designed for specific installations and may not be suitable for all apphcations. For this reason, they are not included in these standards. Information concerning thein proper appHcation, properties, and care should be requested from the manufacturer. 

Acid mixtures are used to oxidize and remove the dark materials. Proper control gives a series of bleached waxes. A white wax requires double refining and reduces the yield to about 30% of the cmde wax input. A series of synthetic waxes is prepared by separating the acids and alcohols produced during saponification of the wax and reesterifying them with acids or alcohols selected to give desired properties of hardness, solubiHty, emulsification, and gloss. 

Whereas semigloss paints can use only one extender, dat paints, especially interior, can use combinations of three or more. Gloss paints typically do not use extenders, which decrease gloss. As a result, gloss paints lack the hardening effect of extenders and must rely on harder binders for adequate durabihty. Other types of extenders used in paints can have functional properties such as corrosion resistance, mildew resistance, and film-hardening effects. Thek functional properties result from thek reactive nature in the paint film. Zinc oxide is an example of a functional extender that contributes to these properties in a paint film. 

---