Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Polymerization addition process

In the reaction of ethylene with sulfuric acid, several side reactions can lead to yield losses. These involve oxidation, hydrolysis—dehydration, and polymerization, especially at sulfuric acid concentrations >98 wt % the sulfur thoxide can oxidize by cycHc addition processes (99). [Pg.201]

In addition to acting as impact modifiers a number of polymeric additives may be considered as processing aids. These have similar chemical constitutions to the impact modifiers and include ABS, MBS, chlorinated polyethylene, acrylate-methacrylate copolymers and EVA-PVC grafts. Such materials are more compatible with the PVC and are primarily included to ensure more uniform flow and hence improve surface finish. They may also increase gelation rates. In the case of the compatible MBS polymers they have the special function already mentioned of balancing the refractive indices of the continuous and disperse phases of impact-modified compound. [Pg.342]

Polymerization of butadiene and of isoprene confronts us with still another configurational problem. The addition may take place in either the 1,2 or 1,4 positions (with an additional possibility of 3,4 addition in the case of isoprene), and, moreover, in the 1,4 addition the new unit may acquire a cis or a trans configuration. It is known that by proper choice of a catalyst and by judicious adjustment of polymerization conditions processes can be developed which yield polymers of high stereospecificity, namely all 1,4 cis, all 1,4 trans, all 1,2 isotactic, or all 1,2 syndiotactic polymers. [Pg.169]

Successive 1,4 units in the synthetic polyisoprene chain evidently are preponderantly arranged in head-to-tail sequence, although an appreciable proportion of head-to-head and tail-to-tail junctions appears to be present as well. Apparently the growing radical adds preferentially to one of the two ends of the monomer. Which of the reactions (6) or (7) is the preferred process cannot be decided from these results alone, however. Positive identification of both 1,2 and 3,4 units in the infrared spectrum shows that both addition reactions take place during the polymerization of isoprene. The relative contributions of the alternative addition processes cannot be ascertained from the proportions of these two units, however, inasmuch as the product radicals formed in reactions (6) and (7), may differ markedly in their preference for addition in one or the other of the two resonance forms available to each. We may conclude merely that structural evidence indicates a preference for oriented (i.e., head-to-tail) additions but that the 1,4 units of synthetic polyisoprene are by no means as consistently arranged in head-to-tail sequence as in the naturally occurring poly-isoprenes. [Pg.244]

Especially in recent years, there has been a tendency to develop stabilisers with higher-MW (>2000 Da) to prevent loss under severe conditions of application. Polymeric additives for polymers, including impact modifiers, flexibilisers, antistatic agents, and processing aids, have been reviewed [54]. [Pg.721]

Since the depolymerization process is the opposite of the polymerization process, the kinetic treatment of the degradation process is, in general, the opposite of that for polymerization. Additional considerations result from the way in which radicals interact with a polymer chain. In addition to the previously described initiation, propagation, branching and termination steps, and their associated rate constants, the kinetic treatment requires that chain transfer processes be included. To do this, a term is added to the mathematical rate function. This term describes the probability of a transfer event as a function of how likely initiation is. Also, since a polymer s chain length will affect the kinetics of its degradation, a kinetic chain length is also included in the model. [Pg.193]

Methylene cyclopropene (5), the simplest triafulvene, is predicted to be of very low stability. From different MO calculations5 it has been estimated to possess only minor resonance stabilization ranging to 1 j3. Its high index of free valency4 at the exocyclic carbon atom causes an extreme tendency to polymerize, a process favored additionally by release of strain. Thus it is not surprising that only one attempt to prepare this elusive C4H4-hydrocarbon can be found in the literature. Photolysis and flash vacuum pyrolysis of cis-l-methylene-cyclopropene-2,3-dicarboxylic anhydride (58), however, did not yield methylene cyclopropene, but only vinyl acetylene as its (formal) product of isomerization in addition to small amounts of acetylene and methyl acetylene65 ... [Pg.19]

Chemical solution deposition (CSD) procedures have been widely used for the production of both amorphous and crystalline thin films for more than 20 years.1 Both colloidal (particulate) and polymeric-based processes have been developed. Numerous advances have been demonstrated in understanding solution chemistry, film formation behavior, and for crystalline films, phase transformation mechanisms during thermal processing. Several excellent review articles regarding CSD have been published, and the reader is referred to Refs. 5-12 for additional information on the topic. Recently, modeling of phase transformation behavior for control of thin-film microstructure has also been considered, as manipulation of film orientation and microstructure for various applications has grown in interest.13-15... [Pg.33]

Bulk polymerization of //r/ .v-2-melhyI-1,3-pcntadiene lead only to 1,4-trans addition polymer, however it allows randomization of the trans structure, leading to an atactic polymer. The polymerization of the clathrate of rraw.v-2-mclhyl-1,3-pcntadiene yielded an isotactic 1,4-trans addition polymer. The polymer formed from the bulk had a molecular weight of 20,000 (240 monomer units), and that formed from the clathrate had a molecular weight of 1000 (12 monomer units). Similar results were obtained for other dienes, and the results are summarized in Table 4. It can be concluded that polymerization of dienes in the clathrate lead exclusively to a 1 A-lrans addition polymer, except in the case of 1,3-cyclohexadiene. For this monomer, although the polymer is formed entirely by 1,4-addition, the polymer formed is essentially atactic. In bulk polymerization, the polymerization proceeds in most cases through 1,4-addition (both trans and cis), but in the case of butadiene and 1,3-cyclohexadiene 1,2-additions were also observed. Actually, in the case of the bulk /-induced polymerization of 1,3-cyclohexadiene the 1,2-addition process was favoured over the 1,4-addition process by a ratio of 4 3. [Pg.344]

The chemistry is both wide ranging and interesting. It involves carbohydrate chemistry, the chemistry of inorganic pigments, organic resins —both natural and synthetic—and many other organic and polymeric additives. The sheet formation process also involves a considerable amount of colloid and surface chemistry. Polymer chemistry and environmental and analytical chemistry also play an important part. [Pg.199]

The orientation of the addition of HC1 to a variety of halogen-substituted 1,3-butadienes has been extensively studied under preparative conditions39-43. The results are given in Table 3. No significant polymerization was observed and the products were in all cases those resulting from a 1 1 addition process. The regiochemistry control by the position of the chlorine atom was quite versatile. A Cl at C(l) favored formation of the 4,3-adduct whereas with Cl on C(2) the 1,4-adduct predominated. The competition between substitution by chlorine and methyl attenuated but did not markedly modify this orientation. However, all these reactions were quite slow and took from 5 to 10 h, even in the presence of a catalyst (mostly cuprous chloride). Therefore, product... [Pg.554]

It is clear that any kind of addition polymerization of the norbornenyl double bond will benefit from the electronic stabilization provided by a conjugating substituent. A simple radical addition process such as is known for both styrene and acrylate monomers may be a reasonable analogy to our system. Whether this effect alone is enough to account for our observations is not clear. A possible additional effect, at least in the case of the phenyl substituted monomers, is suggested below as part of our work on polymer structure. [Pg.59]

The polymerization of 1 mentioned above should be compared with the enzymatic synthesis of chitin reported by Kobayashi and coworkers, in which an oxazoline derivative of A, A -diacetylchitobiose, the repeating unit of chitin was polymerized in the presence of chitinase enzyme via ring-opening addition process to give an artihcial chitin (Scheme 6) [5]. The method using an enzyme, however, may not enable synthesis of nonnatural-type aminopolysaccharide because the reaction catalyzed by chitinase enzyme is limited to the formation of (1 4)-P-glycosidic linkage. [Pg.260]

TPS can be used for the real-time monitoring of polymeric compounding processes as demonstrated by Krumbholz et An industrial hardened terahertz spectrometer was interfaced with a polymer extruder, allowing for real-time measurement of the additive content in molten polymers (Figure 16.3). [Pg.532]

Cationic polymerization is, of course, an inter-molecular electrophilic addition process. Intramolecular electrophilic addition involving two double bonds in the same molecule may be used to generate a cyclic system. Thus, the trienone shown is converted into a mixture of cyclic products when treated with sulfuric acid. [Pg.300]

Alkene polymers such as poly(methyl methacrylate) and polyacrylonitrile are easily formed via anionic polymerization because the intermediate anions are resonance stabilized by the additional functional group, the ester or the nitrile. The process is initiated by a suitable anionic species, a nucleophile that can add to the monomer through conjugate addition in Michael fashion. The intermediate resonance-stabilized addition anion can then act as a nucleophile in further conjugate addition processes, eventually giving a polymer. The process will terminate by proton abstraction, probably from solvent. [Pg.400]

The largest-volume polymers are polyolefins, and the kinetics of olefin polymerization are fairly similar to the ideal addition process just considered. All these olefins form condensation products to form a very long-chain alkane such as... [Pg.452]

An alternative method to control the surface-initiated LRP with a low overall concentration of the dormant species is to add an appropriate amoimt of the capping agent X Hke CuBr2 prior to polymerization, hi this case, no free polymer is produced, and hence no additional process to remove the free polymer possibly in the graft layer is required. This was firstly demonstrated by ATRP on a sihcon wafer by Matjyaszewski et al. [73] and subsequently... [Pg.10]

The data here related on the kinetics of the propylene polymerization and of the transfer processes and the studies of the catalysts carried out with C-labelled alkylaluminums, derive from a series of researches mostly carried out some time ago, when the knowledge of the mechanism of the considered catalytic processes was still rather limited. Nevertheless, it helped remarkably to know these new processes of anionic coordinated polymerization their true catalytic nature (which regard to a-TiCU) differentiates them from the more usual polymerization processes (radicalic) which, actually, are not catalytic. They substantially contributed to demonstrate that the anionic coordinated polymerization is a step-wise addition process in which each monomeric unit inserts itself into a metal carbon bond of the catalytic complex. [Pg.64]

Anionic polymerization A process proceeding by the addition of certain monomers to active center-bearing whole or partial negative charges. [Pg.250]

Miscellaneous additives 0-3 polymerization Affect processing behavior and... [Pg.137]


See other pages where Polymerization addition process is mentioned: [Pg.546]    [Pg.546]    [Pg.126]    [Pg.239]    [Pg.233]    [Pg.466]    [Pg.125]    [Pg.338]    [Pg.447]    [Pg.825]    [Pg.71]    [Pg.503]    [Pg.135]    [Pg.746]    [Pg.132]    [Pg.53]    [Pg.63]    [Pg.166]    [Pg.131]    [Pg.40]    [Pg.147]    [Pg.468]    [Pg.50]    [Pg.449]    [Pg.88]    [Pg.70]    [Pg.375]    [Pg.201]    [Pg.222]    [Pg.291]   
See also in sourсe #XX -- [ Pg.49 ]




SEARCH



ADDITION AND CONDENSATION POLYMERIZATION PROCESSES

Addition polymerization

Addition polymers polymerization processes

Addition process

Additional polymerization

Additives polymerization

Polymeric additives

Processing, thermoplastics addition polymerization

© 2024 chempedia.info