Polyethylene terephthalate PET Plastics

As a further example, para-xylene is oxidized to form terephthalic add, which is used to make polyethylene terephthalate (PET) plastic and polyester fiber (Section 12.8, Table 12.5) ... 

Westerhoff P, Prapaipong P, Shock E, HUlaireau A. Antimony leaching from polyethylene terephthalate (PET) plastic used for bottled drinking water. Water Res 2008a 42 (3) 551-556. 

Polyethylene terephthalate (PET) plastic can also be made from plant sources. PET is typically produced from terephthalic acid and monoethylene glycol (MEG) that are made from petroleum products. MEG can also be fermented from sugarcane, corn, soy, or other organic ingredient. Biobased PET, then, can be produced with approximately 30% from organic sources and 70% from petroleum sources. Coca-Cola, Eord Motor, Heinz, Nike, and Proctor Gamble combined forces in a consortium to develop a 100% plant-based PET product. The plant-based PET consortium will collaborate on PET research projects... 

For example, polyethylene terephthalate (PET) plastic can be bonded with many different types of adhesives, including cyanoacrylates, UV acrylics and epoxies, and good strengths can be obtained on standard lap shear parts (1.6 mm thick). However, if thin films (<0.75 mm thick) of PET are to be bonded then it will be much easier to subject the adhesive to a peel load and the measured strength of the adhesive on the same grade of PET will be considerably lower. 

PE. See polyethylene (PE) pendulum test method perfonnance of product design affecting predicting process and penneability of plastic PET. See polyethylene terephthalate (PET)... 

Polyethylene terephthalate (PET) is one of the most important commercial thermoplastic polyesters, which has been on the market since 1977 and is widely used in both industrial and household applications. Under specific conditions, plastics can be converted into their primary components for use in other chemical processes by chemical recycling. PET is a thermoplastic, and so recycling by chemical methods, which converts it into primary components, can be achieved. This study examines the optimal routes of the existing chemical methods. For chemical recycling, acidic hydrolysis is used and PET is converted into terephthalic acid (TPA) and... 

Claims of perpetual motion create moments of mirth and consternation for those knowledgeable in the laws of thermodynamics. Yet, is it only hyperbole when a responsible journal such as the European Plastics News [1] proclaims that depolymerization of polyethylene terephthalate (PET) can be repeated indefinitely The second law of thermodynamics brings us back to reality. The depolymerization of PET does not operate at 100% yields, but does offer the opportunity for near-stoichiometric recovery of the monomers used to make the polyester. With high yields of potentially valuable monomers, the commercial potential for polyester depolymerization to regain feedstocks must be considered. 

Polyethylene terephthalate (PET) is the plastic that is used to make soft drink bottles. 

There are two main types of plastics thermoplastics and thermosets. What is the difference between them What is each type of plastic used for Polyethylene terephthalate (PET) can be recycled successfully into new and interesting materials. Research the trade name Ecospun on the Internet. What is this material, what is it made from, and what is it used for ... 

On the state level, the interplay of plastics and legislation began in 1978 with the introduction of the polyethylene terephthalate (PET) beverage bottle. In a relatively short time, nine states introduced Tx)ttle bills," or deposit laws on the return of plastic bottles. In these states, the deposit laws account for collection of an estimated 80 to 95% of the PET bottles sold. At present, at least 30 states are looking into some sort of waste management legislation involving plastics. 

Graphite is an excellent but expensive reinforcement for plastics. Aramid (aromatic polyamide), polyester (polyethylene terephthalate PET), and boron filaments are also used as reinforcements for polymers. 

Acetic acid is used to produce the plastic polyethylene terephthalate (PET) (see Ethene [Ethylene]). Acetic acid is used to produce pharmaceuticals (see Acetylsalicylic Acid). 

When a polymer film is used as a substrate, aqueous Ti02 paste without organic surfactants is sintered at relatively low temperatures, with approximately 150°C being sufficient to produce mechanically stable 2 films. Sommeling et al. at ECN used an ITO-coated polyethylene terephthalate) (PET) film as a substrate and prepared a plastic DSSC [164-167]. A cell performance with a 7 of 15 pA/cm2, Voc of 0.48 V, and ff of 0.67 was obtained at an illumination intensity of 250 lux. This performance is sufficient for a power supply for indoor applications such as watches and calculators. Under AM 1.5 irradiation, a Vtx of 0.7 V and /sc of 2 mA/cm2 were obtained. 

PBDEs are used in different resins, polymers, and substrates at levels ranging from 5 to 30% by weight (EU 2001). Plastic materials that utilize PBDEs as flame retardants include ABS polyacrylonitrile (PAN) polyamide(PA) polybutylene terephthalate (PBT) polyethylene (PE) cross-linked polyethylene (XPE) polyethylene terephthalate (PET) polypropylene (PP) polystyrene (PS) high-impact polystyrene (HIPS) polyvinyl chloride (PVC) polyurethane (PUR) and unsaturated polyester (UPE). These polymers and examples of their final products are summarized inTable 5-2 (Hardy 2002 WHO 1994a). 

It is not true that polyethylene terephthalate) (PET) and high density polyethylene (HDPE) packaging are listed as 1 and 2 in the Society of the Plastics Industry (SPI) recycling coding system because they are the most recyclable. The numbers assigned to each plastic in the SPI coding system are purely arbitrary and do not reflect the material s recyclability. 

The principal plastics that show up in municipal wastes are the polyethylenes, polystyrenes, and polypropylenes. These include polyethylene terephthalate (PET) used in soil drink containers, high density polyethylene (HDPE), used in milk jugs, and polystyrene, used in fast-food containers, which, incidentally, were first banned in Oregon (1989). 

By far the most important plastic is polyethylene terephthalate (PET). Bottles of this material are formed in a two-stage process. So-called pre-forms are made by injection moulding and, in a second process, are then stretch-blow-moulded to produce a bottle. PET has properties surprisingly like those of glass, but it does not have the same disadvantages of weight and brittleness. 

Terephthalic acid (benzene 1,4-dicarboxylate, TPA) and isophthalic acid (benzene 1,3-dicarboxylate, IPA) are reactive bi-functional acids used as monomers to make plastics and coatings. TPA is a starting material for polyethylene terephthalate (PET). TPA and IPA are used to make polyester lacquers and coatings including the internal coatings of food cans. 

The most difficult recyclates are the MSW, which usually consists of more or less dirty plastics of various types and sources. According to one report [15] the plastic portion of MSW contains typically 50% PE (mainly low density polyethylene, LDPE), 8-14% polypropylene (PP), 15% polystyrene (PS), 10% polyvinylchloride (PVC) and 5% polyethylene terephthalate (PET), and 5% other polymers, while the hard packaging fraction consists of approx. 60% of PP and HDPE [16]. 

When you must use plastics, choose 2 high-density polyethylene (HDPE), 4 low-density polyethylene (LDPE), and 5 polypropylene (PP). These types of plastics are not known to leach harmful chemicals. Avoid 3 polyvinyl chloride (PVC), 6 polystyrene (PS), and 7 polycarbonate. Plastic bottles made from 1 polyethylene terephthalate (PET or PETE) are for single, not multiple, use. 

Ablation using radiations of various wavelengths (IR, visible, UV, or x-ray) has been employed to fabricate plastic chips. For instance, photoablation using pulsed UV lasers (193 nm) has been used to fabricate plastic chips out of polyethylene terephthalate (PET, 100 pm thick) [189,190, 258,758] and polycarbonate (PC, 125 pm thick) [189,258]. Channels as narrow as 30 pm and as deep as 100 pm can be made [258,758]. The cross section of a photoablated PET channel plate laminated with another PET using a thin PE adhesive layer was shown in Figure 2.20 [191]. 

In this study, Raman spectroscopy and pattern-recognition techniques were used to develop a potential method to differentiate common household plastics by type [87-89], which is crucial to ensure the economic viability of recycling. The test data consisted of 188 Raman spectra of six common household plastics high-density polyethylene (HDPE), low-density polyethylene (LDPE), polyethylene terephthalate (PET), polypropylene (PP), polystyrene (PS), and polyvinylchloride... 

Vinylidene Chloride Copolymer Latex. Vinylidene chloride polymers are often made in emulsion, but usually are isolated, dried, and used as conventional resins. Stable latices have been prepared and can be used diiecdy for coatings (171—176). The principal applications for these materials are as barrier coatings on paper products and, more recently, on plastic films. The heat-seal characteristics of VDC copolymer coatings are equally valuable in many applications. They are also used as binders for paints and nonwoven fabrics (177). The use of special VDC copolymer latices for barrier laminating adhesives is growing, and the use of vinylidene chloride copolymers in flame-resistant carpet backing is well known (178—181). VDC latices can also be used to coat polyethylene terephthalate) (PET) bottles to retain carbon dioxide (182). 

---