Piles, foundation

Anode supports, cable insulators and the coating on the object to be protected can be destroyed by anodic evolution of chlorine (see Section 7.1), Only chorine-resistant materials should be used. Anodes on retaining walls or between pile foundations can be installed in perforated or fabricated plastic tubes (half-shells) (see Fig. 16-8). They must naturally be provided with very many holes to avoid uneven removal of anode material. Filter tubes of a chlorine-resistant special material or... 

When piled foundations are used, by regrouping equipment can often save a number of piles, more than paying for increased piping cost. 

After the failure of the Texas Tower TT-4, an important step forward was taken in the 1960s when oil drilling and related installations of pipelines at depths up to 60 m off the Mississippi Delta were begun. These installations were designed based on a more fundamental understanding of sediment properties. Oil platforms off the Mississippi Delta are of the jacket or template type which are supported by a long open-ended steel pipe pile foundation. 

Borings conducted from fixed, specially erected platforms land exploration equipment and techniques used by the petroleum industry to design pile foundations in water depths in the range of 6-15 m... 

Piles are used to transmit structural loadings to the subsoil when the surface sediments cannot support the load. They may be single or in groups, and may be fully or partially embedded. Recent advancement in installation equipment has allowed diese members to be driven in any desired environment and up to 460 m of water depth. The versatility of pile foundations has made them adaptable to most types of conditions and requirements. A detailed discussion of classical methods employed on land has been presented by Kezdi (1975). Methods employed offshore have been discussed by McClelland et al. (1967,1969), McClelland (1974), McQelland and Cox (1976), Randolph (1983), and Randolph and ( urvenec (2011). Methods and techniques applicable to the marine environment will be discussed in the following sections. 

The design of pile foundations for offshore structures must be able to satisfy the following criteria ... 

Cyclic lateral load-displacement characteristics of soil in zone of unconfined response. (From Bea, R.G., Dynamic response of piles in offshore platforms, Proceedings of the Dynamic Response of Pile Foundations Analytical Aspects, ASCE, pp. 80-109,1980. Reprinted with permission of ASCE.)... 

Berezantsev, V. G., Kristoforov, V. S., and Golubkov, V. N. (1961), Load bearing capacity and deformation of piled foundations, Proceedings of the 5th International Conference on Soil Mechanics and Foundation Engineering, Paris, France, 2, pp. 11-11. 

Chellis, R. D. (1961), Pile Foundations, 2nd ed., McGraw-Hill, New York. 

Kezdi, A. (1975), Pile foundations. Foundation Engineering Handbook, eds. H. F. Winterkom and H. Y. Fang, Van Nostrand-Reinhold Co., New York, pp. 556-600. 

McClelland, B., and Cox, W. R. (1976), Performance of pile foundations for offshore structures. Proceedings of the 1st International Conference, Behavior of Offshore Structures, Trondheim, Norway, 1, pp. 528-544. 

Meyerhof, G. G. (1976), Bearing capacity and settlement of pile foundations. Journal of the Geotechnical Engineering Division. ASCE, 102, No. GT-3, pp. 197-228... 

Poulos, H. G. (1981b), Pile foundations subjected to vertical loading. Symposium on Geotechnical Aspects of Coastal and Offshore Structures, Bangkok, Thailand, pp. 61-78. 

Poulos, H. G., and Davis, E. H. (1980), Pile Foundation Analysis and Design, John Wiley Sons, New York. 

Skempton, A. W. (1953), Discussion Piles and pile foundations, settlement of pile foimdations. Proceedings of the 3rd International Conference on Soil Mechanics and Foundation Engineering, Zurich, 3. p. 172. 

Toolan, F. E. and Fox, D. A. (1977), Geotechnical planning of piled foundations for offshore platforms. Proceedings of the Institution of Civil Engineers, London, Part I, 62, pp. 221-230. 

Vesic, A. S. (1970), Load transfer in pile—Soil system. Design and Installation of Pile Foundation and Cellular Structures, eds. H. Y. Fang and T. D. Dismuke, Envo Publishing Co., Lehigh Valley, PA, pp. 47-74. 

Vesic, A. S. (1977), Design of Pile Foundations, National Cooperative Highway Research Program S5mthesis of Practice No. 42, Transportation Research Board, Washington, DC. 

Madabhushi, S. P. G., Knappett, J. A., Haigh, S. K. (2009). Design of pile foundations in liquefiable soils. Imperial College Press. ISBN 978-1-84816-362-1. 

Post-doctoral research in the UK and Canada, focusing mainly on the physical and numerical modelling of soil dynamics and earthquake engineering, before being appointed as a University Lecturer in 2008. He has recently co-authored a book on Design of Pile Foundations in Liquefiable Soils together with Dr Madabhushi and Dr Knappett (University of Dundee). 

Reconstruction of submerged structures. Water, particularly salt water, leads to breakdown of submerged concrete structures, piers, piles, foundations, bridge footings, dikes, and dams. The most... 

Chan, S.F. Hong, L.P. 1985. Pile foundations in limestone areas in Malaysia. Foundation problems in limestone areas in Malaysia. The Institution of Engineers Malaysia. Malaysia Kuala Lumpur. 

For pile foundations such as bored piles, design parameters studies such as conducted by Tan et al. (1998) is available. Design curve relating shaft resistance factor with SPT N value is reproduced in Figure 3.11. Pile base resistance from their studies is negligible and is recommended not be considered. 

Driven Pile Foundation, Pile Driving Systems and Formulas... 

---