Phosphate bead

Quartz glass (silica), pyrex (borosilicates) and other household and laboratory glasses (boroaluminosilicates) owe their high chemical resistance to the (tetrahedral) network forming properties of Si, B, P and A1 (cf., the borax and phosphate bead tests in qualitative dry reactions on the salts of numerous metals). 

This combines with metallic oxides forming orthophosphates, which are often coloured. Thus a blue phosphate bead is obtained with cobalt salts ... 

The sodium metaphosphate glass exhibits little tendency to combine with acidic oxides. Silica, in particular, is not dissolved by the phosphate bead. When a silicate is strongly heated in the bead, silica is liberated and this remains suspended in the bead in the form of a semi-translucent mass the so-called silica... 

In general, it may be stated that the borax beads are more viscous than the phosphate beads. They accordingly adhere better to the platinum wire loop. The colours of the phosphates, which are generally similar to those of the borax beads, are usually more pronounced. The various colours of the phosphate beads are collected in the following table. 

Detection. — Titanium compounds do not color the Bunsen flame, but show a number of spectral lines in the blue and green region. The borax or phosphate bead is colorless in the oxidizing flame, and after heating in the inner flame is yellow while hot and violet when cold. 

In general, it may be stated that the borax beads are more viscous than the phosphate beads. They accordingly adhere better to the platinum wire loop. 

Matsuno, T., Hashimoto, Y., Adachi, S., Omata, K., Yoshitaka, Y., Ozeki, Y., Umezu, Y., Tabata, Y., Nakamura, M. Satoh, T. (2008) Preparation of injectable 3D-formed beta-tricalcium phosphate bead/alginate composite for bone tissue engineering. Dent Mater J, 27, 827-34. 

Scheme 11.3 The binding mechanism for metal ion adsorption onto chitosan-tripol phosphate beads.

Phosphate Beads. If a small quantity of microcosmic salt (Chapter 3.2) is heated on a loop of platinum wire, it fuses and forms sodium metaphosphate glass (14.12). The molten glass will react with trace metal ions, if present, to form coloured glass beads of double orthophosphates, for example, (14.13) and (14.14) (Table 14.2). 

Buffer solutions, NMR reference standard Buffer solutions Buffer solutions Phosphate bead test for metals Dessicant Fusion matrix... 

The catalytic subunit then catalyzes the direct transfer of the 7-phosphate of ATP (visible as small beads at the end of ATP) to its peptide substrate. Catalysis takes place in the cleft between the two domains. Mutual orientation and position of these two lobes can be classified as either closed or open, for a review of the structures and function see e.g. [36]. The presented structure shows a closed conformation. Both the apoenzyme and the binary complex of the porcine C-subunit with di-iodinated inhibitor peptide represent the crystal structure in an open conformation [37] resulting from an overall rotation of the small lobe relative to the large lobe. 

A typical process for the preparation of a poly(methyl methacrylate) suspension polymer involves charging a mixture of 24.64 parts of methyl methacrylate and 0.25 parts of benzoyl peroxide to a rapidly stirred, 30°C solution of 0.42 parts of disodium phosphate, 0.02 parts of monosodium phosphate, and 0.74 parts of Cyanomer A-370 (polyacrylamide resin) in 73.93 parts of distilled water. The reaction mixture is heated under nitrogen to 75°C and is maintained at this temperature for three hours. After being cooled to room temperature, the polymer beads are isolated by filtration, washed, and dried (69). 

Direct measurement of adsorptive stripping voltaimnetric peaks using HMDE 0.60 V and accumulation potential of -0.40V Dilution in phosphate buffer and water, analyzed in Vis region Ion pair formation with octadecyltrimethylammonium bromide at pH 5.6, extraction of ion pair into n-butanol Sample solution mixed with 1 M HCl, ethanol and purification on Sephadex DEAE 25 gel, gel beads are filtered off, packed into 1 nun cell and absorbance measured... 

Figure 2.7. Identification ofphosphoproteins by site-specific chemical modification. A. Method of Zhou et al. (2001) involves trypsin digest of complex protein mixture followed by addition of sulfhydryl groups specifically to phosphopeptides. The sulfhydryl group allows capture of the peptide on a bead. Elution of the peptides restores the phosphate and the resulting phosphopeptide is analyzed by tandem mass spectrometry. B. Method of creates a biotin tag in place of the phosphate group. The biotin tag is used for subsequent affinity purification. The purified proteins are proteolyzed and identified by mass spectrometry.

In related work a library of 1,458 peptide ligands and various metal salts was tested in hydrolysis reactions of (p-nitrophenyl)phosphates.35 An active substructure composed of polymer-bound histidine in combination with Eu3+ was identified by further dissecting the original hit structure. It needs to be pointed out that catalytically active polymer beads can also be tested for catalytic activity using IR-thermography. In a seminal paper this was demonstrated using 7,000 encoded polymer beads prepared by split-and-pool methods, specifically in the metal-free acylation of alcohols.36... 

Although several types of fluorescent beads were proposed as a microscopic fluorescence standard 30 years ago,2 beads have not been used as a proteinembedding matrix for routine IHC on FFPE tissue. We recently tested primary coated beads ( Dynabeads, Dynal, New York) that are coated with a goat anti-mouse antibody on the surface of the beads. In the first experiment, a monoclonal antibody to cytokeratin 7 (DAKO, 50pL/34.5pg) was bound to the beads by incubating with the beads (150 pL at a concentration of 109 beads/1 pL) at 4°C in a cold room with an automatic shaker for overnight. Incubation was followed by three phosphate-buffered saline (PBS) washes,... 

Wash particles (e.g., 100 mg of 1 pm carboxylated latex beads) into coupling buffer (i.e., 50 mM MES, pH 6.0 or 50 mM sodium phosphate, pH 7.2 buffers with pH values from pH 4.5 -7.5 may be used with success however, as the pH increases the reaction rate will decrease). Suspend the particles in 5 ml coupling buffer. The addition of a dilute detergent solution may be done to increase particle stability (e.g., final concentration of 0.01 percent sodium dodecyl sulfate (SDS)). Avoid the addition of any components containing carboxylates or amines (such as acetate, glycine, Tris, imidazole, etc.). Also, avoid the presence of thiols (e.g., dithiothreitol (DTT), 2-mercaptoethanol, etc.), as these will react with EDC and effectively inactivate it. 

MWNTs favored the detection of insecticide from 1.5 to 80 nM with a detection limit of InM at an inhibition of 10% (Fig. 2.7). Bucur et al. [58] employed two kinds of AChE, wild type Drosophila melanogaster and a mutant E69W, for the pesticide detection using flow injection analysis. Mutant AChE showed lower detection limit (1 X 10-7 M) than the wild type (1 X 10 6 M) for omethoate. An amperometric FIA biosensor was reported by immobilizing OPH on aminopropyl control pore glass beads [27], The amperometric response of the biosensor was linear up to 120 and 140 pM for paraoxon and methyl-parathion, respectively, with a detection limit of 20 nM (for both the pesticides). Neufeld et al. [59] reported a sensitive, rapid, small, and inexpensive amperometric microflow injection electrochemical biosensor for the identification and quantification of dimethyl 2,2 -dichlorovinyl phosphate (DDVP) on the spot. The electrochemical cell was made up of a screen-printed electrode covered with an enzymatic membrane and combined with a flow cell and computer-controlled potentiostat. Potassium hexacyanoferrate (III) was used as mediator to generate very sharp, rapid, and reproducible electric signals. Other reports on pesticide biosensors could be found in review [17],... 

Yoshimura et al. [193] carried out microdeterminations of phosphate by gel-phase colorimetry with molybdenum blue. In this method phosphate reacted with molybdate in acidic conditions to produce 12-phosphomolybdate. The blue species of phosphomolybdate were reduced by ascorbic acid in the presence of antimonyl ions and adsorbed on to Sephadex G-25 gel beads. Attenuation at 836 and 416 nm (adsorption maximum and minimum wavelengths) was measured, and the difference was used to determine trace levels of phosphate. The effect of nitrate, sulfate, silicic acid, arsenate, aluminium, titanium, iron, manganese, copper, and humic acid on the determination were examined. 

CL emission. The system allows a simple determination of phosphate in 3 min with a linear range of 4.8-160 pM. Owing to its sensitivity, this method could be satisfactorily applied to the analysis of maximum permissible phosphate concentrations in natural waters [42-44], Also, the maltose-phosphorylase, mutar-ose, and glucose oxidase (MP-MUT-GOD) reaction system combined with an ARP-luminol reaction system has been used in a highly sensitive CL-FIA sensor [45], In this system, MP-MUT-GOD is immobilized on A-hydroxysuccinimide beads and packed in a column. A linear range of 10 nM-30 pM and a measuring time of 3 min were provided, yielding a limit of detection of 1.0 pM as well as a satisfactory application in the analysis of river water. 

---