Buffers phosphate

The C-S bond in purine derivatives undergoes cleavage under mild conditions by nucleophilic agents such as benzylmercaptan or glutathione in dimethylformamide with a phosphate buffer of pH 6.5 (277). The salt (110) of dithiazolylsulfide heated at 190 C yields the A-4-thiazo-line-2-thione (112) and 2-chlorothiazole (111) (Scheme 56) (278-280). 

The purity of a sample of Na2S203 was determined by a coulometric redox titration using as a mediator, and as the titrant. A sample weighing 0.1342 g is transferred to a 100-mL volumetric flask and diluted to volume with distilled water. A 10.00-mL portion is transferred to an electrochemical cell along with 25 mL of 1 M KI, 75 mL of a pH 7.0 phosphate buffer, and several drops of a starch indicator solution. Electrolysis at a constant current of 36.45 mA required 221.8 s to reach the starch indicator end point. Determine the purity of the sample. 

Description of Method. The water-soluble vitamins Bi (thiamine hydrochloride), B2 (riboflavin), B3 (niacinamide), and Be (pyridoxine hydrochloride) may be determined by CZE using a pH 9 sodium tetraborate/sodlum dIhydrogen phosphate buffer or by MEKC using the same buffer with the addition of sodium dodecyl-sulfate. Detection Is by UV absorption at 200 nm. An Internal standard of o-ethoxybenzamide Is used to standardize the method. 

Procedure. A vitamin B complex tablet Is crushed and placed In a beaker with 20.00 mL of a 50% v/v methanol solution that Is 20 mM In sodium tetraborate and contains 100.0 ppm of o-ethoxybenzamIde. After mixing for 2 min to ensure that the B vitamins are dissolved, a 5.00-mL portion Is passed through a 0.45- xm filter to remove Insoluble binders. An approximately 4-nL sample Is loaded Into a 50- xm Internal diameter capillary column. For CZE the capillary column contains a 20 mM pH 9 sodium tetraborate/sodlum dIhydrogen phosphate buffer. For MEKC the buffer Is also 150 mM In sodium dodecylsulfate. A 40-kV/m electric field Is used to effect both the CZE and MEKC separations. 

This experiment describes a quantitative analysis for caffeine, theobromine, and theophylline in tea, pain killers, and cocoa. Separations are accomplished by MEKC using a pH 8.25 borate-phosphate buffer with added SDS. A UV detector set to 214 nm is used to record the electropherogram. An internal standard of phenobarbital is included for quantitative work. 

McKillop and associates have examined the electrophoretic separation of alkylpyridines by CZE. Separations were carried out using either 50-pm or 75-pm inner diameter capillaries, with a total length of 57 cm and a length of 50 cm from the point of injection to the detector. The run buffer was a pH 2.5 lithium phosphate buffer. Separations were achieved using an applied voltage of 15 kV. The electroosmotic flow velocity, as measured using a neutral marker, was found to be 6.398 X 10 cm s k The diffusion coefficient,... 

D-Methyl mannoside with 2 M KSCN at pH 7.5 in potassium phosphate buffer... 

Adsorption of t-PA to process equipment surfaces consisting of either stainless steel or glass was minimized by adding the detergent polyoxyethylene sorbitan monooleate (Tween 80) to the semm-free culture conditioned media at 0.01% (vol/vol). The equipment was also rinsed, before use, with phosphate buffered saline (PBS) containing 0.01% Tween 80. Hydrophilic, plastic equipment was used whenever possible. AH buffers were sterile filtered. Sterile filtration of Hquids and gases is usually carried out using 0.2 or 0.45 p.m filters. 

DI = deionized water PBS, phosphate-buffered saline HSA, human semm albumin essential medium + 10% fetal bovine semm. 

An additional mole of ammonium sulfate per mole of final lactam is generated duting the manufacture of hydroxylamine sulfate [10039-54-0] via the Raschig process, which converts ammonia, air, water, carbon dioxide, and sulfur dioxide to the hydroxylamine salt. Thus, a minimum of two moles of ammonium sulfate is produced per mole of lactam, but commercial processes can approach twice that amount. The DSM/Stamicarbon HPO process, which uses hydroxylamine phosphate [19098-16-9] ia a recycled phosphate buffer, can reduce the amount to less than two moles per mole of lactam. Ammonium sulfate is sold as a fertilizer. However, because H2SO4 is released and acidifies the soil as the salt decomposes, it is alow grade fertilizer, and contributes only marginally to the economics of the process (145,146) (see Caprolactam). 

Boiler feed-water systems that use dernineralized or evaporated makeup or pure condensate may be protected from caustic attack through coordinated phosphate and pH control. Phosphate buffers the boiler water, reducing the chance of large pH changes due to the development of high caustic or acid concentrations. Excess caustic combines with disodium phosphate and forms trisodium phosphate. Sufficient disodium phosphate must be available to combine with all of the free caustic in order to form trisodium phosphate. 

In the future it may be possible to oxidize toluene microbiaHy to produce benzyl alcohol. Treatment of toluene in the presence of air with a culture of Af. thermophila in a phosphate buffer is reported to yield a mixture of benzaldehyde, benzyl alcohol, and -cresol [106-44-5] (3). 

Properties and Structure. a -Acid glycoprotein (a -AGP) has a molecular mass of about 41,000 and consists of a peptide chain having 181 amino acid residues and five carbohydrate units (14,15). Two cystine disulfide cross-linkages connect residues 5 and 147 and residues 72 and 164. The carbohydrate units comprise 45% of the molecule and contain siaUc acid, hexosamine, and neutral hexoses. In phosphate buffer the isoelectric point of the... 

AACC Method32-07for TDF, SDF, and IDF. This approved method is a modification of the Prosky method. The phosphate buffer is replaced by a buffer of 2(A[-morpholino)ethanesulfonic acid (MES) [4432-31-9] and tris(hydroxymethyl)aminomethane (TRIS) [77-86-1]. Precision is improved and analysis time is reduced. I DE may be determined on a separate sample or calculated by summing the SDE and IDE values. The MES /TRIS-modified method has received final approval by AACC and official first action by AO AC (5). 

---