Ongoing inspection and maintenance

Identify those items requiring ongoing inspection and maintenance... 

Another reason for incoming inspection is to identify where there is a need for ongoing inspection and maintenance. Items concerned included inter alia ... 

Ongoing inspection and maintenance inert gas purge/ shaft rotation/heating/dessicant bags/insulation resistance/other ... 

Are materiel incoming inspection, ongoing inspection and maintenance being carried out and recorded to an approved procedure ... 

Maintenance programs that include appropriate inspection and testing should be established and implemented for critical equipment to sustain ongoing mechanical integrity. Maintenance activities focused on this equipment should be structured to enhance safety and protect the environment. 

In this Final Rule, U.S. HUD sets forth seven strategies for lead paint or paint hazard evaluation and hazard reduction, varying in relative stringency from least to most (1) safe work practices during rehabilitation (2) ongoing lead paint maintenance practices to assure continued intact surfaces (3) visual assessment and paint stabihzation (4) risk assessment and interim controls (as defined above) (5) combined risk assessment and lead paint inspection with interim controls (6) risk assessment and abatement of lead paint hazards and (7) lead-based paint inspection and abatement via removal of aU lead paint. 

Establish maintenance systems for critical process-related equipment, including written procedures, employee training, appropriate inspections, and testing of such equipment to ensure ongoing mechanical integrity. 

Storage of materiel, with, where necessary, regular ongoing documented inspection and preventative maintenance. 

Chapter 7 covers the site management of materiel, starting with the different sources of supply and underlining the importance of effective upstream engineering, procurement and at-source inspection to avoid problems on site. Incoming inspection and ongoing maintenance are explained with model forms to manage these activities. The chapter concludes with a discussion on trace-ability and spare parts. 

Ongoing inspection during operations, preventive maintenance, and repair work Annual site inspections... 

ONGOING INSPECTION DURING OPERATIONS, PREVENTIVE MAINTENANCE, AND REPAIR WORK... 

Listing of crane, forklift, power presses, and other pieces of equipment that need inspection and ongoing maintenance. Daily checklists are important in this section. 

Table III.6 of Appendix III points to the ongoing and planned R D relevant for the technologies of core refuelling, plant maintenance and in-service inspection.

---