Modified electrode study

Figure 6. Operational stability of the (O) HRP and (CDH modified electrodes studied by repeated injections of 10 pM phenol for HRP and 1 pM dopamine for CDH. For experimental conditions see Figure 3...

The electrochemistry of conducting polymers has been the subject of several reviews2-8 and has been included in articles on chemically modified electrodes.9-14 The primary purpose of this chapter is to review fundamental aspects of the electrochemistry of conducting polymer films. Applications, the diversity of materials available, and synthetic methods are not covered in any detail. No attempt has been made at a comprehensive coverage of the relevant literature and the materials that have been studied. Specific examples have been selected to illustrate general principles, and so it can often be assumed that other materials will behave similarly. 

The electrochemistry of a polymer-modified electrode is determined by a combination of thermodynamics and the kinetics of charge-transfer and transport processes. Thermodynamic aspects are highlighted by cyclic voltammetry, while kinetic aspects are best studied by other methods. These methods will be introduced here, with the emphasis on how they are used to measure the rates of electron and ion transport in conducting polymer films. Charge transport in electroactive films in general has recently been reviewed elsewhere.9,11... 

It was also observed that, with the exception of polyacetylene, all important conducting polymers can be electrochemically produced by anodic oxidation moreover, in contrast to chemical methoconducting films are formed directly on the electrode. This stimulated research teams in the field of electrochemistry to study the electrosynthesis of these materials. Most recently, new fields of application, ranging from anti-corrosives through modified electrodes to microelectronic devices, have aroused electrochemists interest in this class of compounds... 

The reduction of carbon dioxide is another of the basic electrochemical reactions that has been studied at modified electrodes. The reduction at Co or Ni phthalocyanine in acidic solution yields formic acid or carbon monoxide A very high selectiv-... 

The application of modified electrodes for the assay of antibodies in senun preparations using redox indicators encapsuled into antigene marked liposomes attached to an electrode surface was suggested First model studies towards this goal make use of ferricyanide ions entrapped in synthetic vesicles. 

Reference electrodes for non-aqueous solvents are always troublesome because the necessary salt bridge may add considerable errors by undefined junction potentials. Leakage of components of the reference compartment, water in particular, into the working electrode compartment is a further problem. Whenever electrochemical cells of very small dimensions have to be designed, the construction of a suitable reference electrode system may be very difficult. Thus, an ideal reference electrode would be a simple wire introduced into the test cell. The usefulness of redox modified electrodes as reference electrodes in this respect has been studied in some detail... 

The field of modified electrodes spans a wide area of novel and promising research. The work dted in this article covers fundamental experimental aspects of electrochemistry such as the rate of electron transfer reactions and charge propagation within threedimensional arrays of redox centers and the distances over which electrons can be transferred in outer sphere redox reactions. Questions of polymer chemistry such as the study of permeability of membranes and the diffusion of ions and neutrals in solvent swollen polymers are accessible by new experimental techniques. There is hope of new solutions of macroscopic as well as microscopic electrochemical phenomena the selective and kinetically facile production of substances at square meters of modified electrodes and the detection of trace levels of substances in wastes or in biological material. Technical applications of electronic devices based on molecular chemistry, even those that mimic biological systems of impulse transmission appear feasible and the construction of organic polymer batteries and color displays is close to industrial use. 

In view of the overwhelming success of PS in surface science, it is not surprising that XPS has been used rather early for the study of electrochemically modified electrode surfaces. Winograd et al. [10-12] were the first to use this spectroscopy for the study of oxide formation on Pt electrodes and also for the investigation of metal underpotential deposition (UPD) on Pt. Although a standard surface analytical tool, XPS has not found a corresponding consideration in electrochemistry. 

Most recently, they have developed" a cell configuration for the study of modified electrodes that employs, as a working electrode, colloidal graphite deposited onto kapton tape (typically employed as a window material). Such an arrangement minimizes attenuation due to the electrolyte solution. 

Several metallophthalocyanines have been reported to be active toward the electroreduction of C02 in aqueous electrolyte especially when immobilized on an electrode surface.125-127 CoPc and, to a lesser extent, NiPc appear to be the most active phthalocyanine complexes in this respect. Several techniques have been used for their immobilization.128,129 In a typical experiment, controlled potential electrolysis conducted with such modified electrodes at —1.0 vs. SCE (pH 5) leads to CO as the major reduction product (rj = 60%) besides H2, although another study indicates that HCOO is mainly obtained.129 It has been more recently shown that the reduction selectivity is improved when the CoPc is incorporated in a polyvinyl pyridine membrane (ratio of CO to H2 around 6 at pH 5). This was ascribed to the nature of the membrane which is coordinative and weakly basic. The microenvironment around CoPc provided by partially protonated pyridine species was suggested to be important.130,131 The mechanism of C02 reduction on CoPc is thought to involve the initial formation of a hydride derivative followed by its reduction associated with the insertion of C02.128... 

Cobaloxime(I) generated by the electrochemical reductions of cobaloxime(III), the most simple model of vitamin Bi2, has been shown to catalyze radical cyclization of bromoacetals.307 Cobalt(I) species electrogenerated from [ConTPP] also catalyze the reductive cleavage of alkyl halides. This catalyst is much less stable than vitamin Bi2 derivatives.296 It has, however, been applied in the carboxylation of benzyl chloride and butyl halides with C02.308 Heterogeneous catalysis of organohalides reduction has also been studied at cobalt porphyrin-film modified electrodes,275,3 9-311 which have potential application in the electrochemical sensing of pollutants. 

S.Q. Liu and H.Y. Chen, Spectroscopic and voltammetric studies on a lanthanum hexacyanoferrate modified electrode. J. Electroanal. Chem. 528, 190-195 (2002). 

B. Haghighi, S. Varma, F.M. Alizadeh, Y. Yigzaw, and L. Gorton, Prussian blue modified glassy carbon electrodes - study on operational stability and its application as a sucrose biosensor. Talanta 64, 3-12 (2004). 

CNTs have been one of the most actively studied electrode materials in the past few years due to their unique electronic and mechanical properties. From a chemistry point of view, CNTs are expected to exhibit inherent electrochemical properties similar to other carbon electrodes widely used in various electrochemical applications. Unlike other carbon-based nanomaterials such as C60 and C70 [31], CNTs show very different electrochemical properties. The subtle electronic properties suggest that carbon nanotubes will have the ability to mediate electron transfer reactions with electroactive species in solution when used as the electrode material. Up to now, carbon nanotube-based electrodes have been widely used in electrochemical sensing [32-35], CNT-modified electrodes show many advantages which are described in the following paragraphs. 

The first CNT-modified electrode was reported by Britto et al. in 1996 to study the oxidation of dopamine [16]. The CNT-composite electrode was constructed with bro-moform as the binder. The cyclic voltammetry showed a high degree of reversibility in the redox reaction of dopamine (see Fig. 15.3). Valentini and Rubianes have reported another type of CNT paste electrode by mixing CNTs with mineral oil. This kind of electrode shows excellent electrocatalytic activity toward many materials such as dopamine, ascorbic acid, uric acid, 3,4-dihydroxyphenylacetic acid [39], hydrogen peroxide, and NADH [7], Wang and Musameh have fabricated the CNT/Teflon composite electrodes with attractive electrochemical performance, based on the dispersion of CNTs within a Teflon binder. It has been demonstrated that the electrocatalytic properties of CNTs are not impaired by their association with the Teflon binder [15]. 

Figure 15.14 illustrates a typical voltammetric result for the determination of dopamine in the presence of ascorbic acid with a CNT-modified electrode. The selective voltammetric detection of uric acid [82] or norepinephrine [83] in the presence of ascorbic acid has been demonstrated with a (3-cyclodextrin-modified electrodes incorporating CNTs. Ye et al. [84] have studied the electrocatalytic oxidation of uric acid and ascorbic acid at a well-aligned CNT electrode, which can be used for the selective determination of uric acid in the presence of ascorbic acid. The simultaneous determination of dopamine and serotonin on a CNT-modified GC electrode has also been described [85],... 

It has been demonstrated that the presence of CNTs greatly increases the oxidation peak current of 6-benzylaminopurine. The CNT-modified electrode is suitable for the determination of trace amounts of benzylaminopurine and has the advantages of high sensitivity, quick response, and good stability [86], Wang et al. have studied the electro-catalytic oxidation of thymine at a a-cyclodextrin incorporated CNT coated electrode in an alkaline media. A sensitive detection scheme for thymine has been further developed by using differential pulse voltammetry [87], The electrochemical determination... 

---