Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Model analysis

It is possible to analyze various situations in which disturbance variables change. We could, for example, analyze the change in bottom composition as a result of a change in feed flow. If it can be assumed that there are no changes in feed and steam temperature and bottom and distillate flow, how would the bottom composition xb respond to feed changes To analyze this, the model will be linearized with the condition that STsteam = = 0. [Pg.215]

The model for this situation in which we want to make this specific analysis, consists of Eqns. (15.35)-(15.38). [Pg.216]


Fig. 7. Voigt model analysis of (a) lateral contact stiffness and (b) the response time, t, for a silicon nitride tip vs. poly(vinylethylene) as a function of frequency and polymer aging times. Reprinted with permission from ref [71]. Fig. 7. Voigt model analysis of (a) lateral contact stiffness and (b) the response time, t, for a silicon nitride tip vs. poly(vinylethylene) as a function of frequency and polymer aging times. Reprinted with permission from ref [71].
ISCST3 - Industrial Source Complex - Short Term This model is used in more detailed studies of maximum air quality impacts (Phase 3 - Refined Modeling Analysis). The purpose is to compute short term concentration or deposition values, from multiple sources, on specified locations (i.e., receptors). To download the file, click the filename. This is the latest version of the regulatory model ISCST3 (00101) which was released by U.S. EPA on April 27, 2000. The file ISCST.ZIP is 1.60 MB (Executable, Source, Test Cases). You can also download the ISCST3 model evaluation references. [Pg.329]

Due to the methods and limitations outlined in Section 11.3..3, in thermal comfort analysis, draft risk evaluations cannot be performed using this type of room model. Analysis of air temperature stratification and thermal comfort for the occupant zone can be achieved only by using multi-air-node room models. [Pg.1080]

Probabilistic CA. Probabilistic CA are cellular automata in which the deterministic state-transitions are replaced with specifications of the probabilities of the cell-value assignments. Since such systems have much in common with certain statistical mechanical models, analysis tools from physics are often borrowed for their study. Probabilistic CA are introduced in chapter 8. [Pg.18]

In fact, the bond model analysis [16-18] at the HF/6-31G level shows that the coefficient (0.64) is larger than the one (0.53) in the LUMO of acrolein. These results support the assumption of being below 7 in the conjugate systems. [Pg.68]

The predictions of the reactivities by the geminal bond participation have been confirmed by the bond model analysis [103-105] of the transition states and the calculations of the enthalpies of activation AH of the Diels-Alder reaction [94], the Cope rearrangement [95], the sigmatropic rearrangement [96], the Alder ene reaction [100], and the aldol reaction [101] as are illustrated by the reactions of the methyl silyl derivatives in Scheme 38 [102], The bond is more electron donating than the bond. A silyl group at the Z-position enhances the reactivity. [Pg.118]

As mentioned in the Introduction, trimethyltriphosphirane 3 and tetramethyl-tetraphosphetane 4 have almost the same strain energies. We subjected the parent molecules, triphosphirane 14 and tetraphosphetane 15, to the bond model analysis... [Pg.270]

The lone pairs on the oxygen atom in disiloxane, disilaoxirane, and 1,3 -cyclodis-iloxane have been shown [131] by the bond model analysis [132-134] to delocalize significantly to the silicon atoms throngh the interaction of the n-orbital... [Pg.309]

Bequette, B. W., Process Dynamics Modeling, Analysis and Simulation, Prentice-Hall, Englewood Cliffs, NJ, 1998. [Pg.538]

Figure 22.4 Monte Carlo techniques were used to simulate different hypothetical individuals for different instances of the trial design, using variability and uncertainty distributions from the model analysis. The result is a collection of predicted outcomes, shown as a binned histogram (top figure). Success was defined as a difference in end point measurement of X or smaller between drug and comparator. Likelihood of success (shown in the bottom figure as a cumulative probability) for this example (low/medium drug dose and high comparator dose) is seen to be low, about 33%. Figure 22.4 Monte Carlo techniques were used to simulate different hypothetical individuals for different instances of the trial design, using variability and uncertainty distributions from the model analysis. The result is a collection of predicted outcomes, shown as a binned histogram (top figure). Success was defined as a difference in end point measurement of X or smaller between drug and comparator. Likelihood of success (shown in the bottom figure as a cumulative probability) for this example (low/medium drug dose and high comparator dose) is seen to be low, about 33%.
Reasoning in Time Modeling, Analysis, and Pattern Recognition of Temporal Process Trends... [Pg.9]

REASONING IN TIME MODELING, ANALYSIS, AND PATTERN RECOGNITION OF TEMPORAL PROCESS TRENDS... [Pg.206]

Lundahl, P., Beigi, F. Immobilized liposome chromatography of drugs for model analysis of drug-membrane interactions. Adv. Drug Deliv. Rev. 1997, 23, 221-227. [Pg.49]

Further progress in understanding membrane instability and nonlocality requires development of microscopic theory and modeling. Analysis of membrane thickness fluctuations derived from molecular dynamics simulations can serve such a purpose. A possible difficulty with such analysis must be mentioned. In a natural environment isolated membranes assume a stressless state. However, MD modeling requires imposition of special boundary conditions corresponding to a stressed state of the membrane (see Refs. 84,87,112). This stress can interfere with the fluctuations of membrane shape and thickness, an effect that must be accounted for in analyzing data extracted from computer experiments. [Pg.94]

LX Yu, JR Crison, GL Amidon. Compartmental transit and dispersion model analysis of small intestinal transit flow in humans. Int J Pharm 140 111-118, 1996. [Pg.422]

Theoretical and model analysis based on a nanofluidic approach is needed for this situation. One may ask, is it possible to release proteins loaded in nanotubules We have found that the addition of the polycation PEI in the release solvent resulted in much quicker protein release, as demonstrated in Figure 14.9. In this case, most of the insulin was released in 1 hour instead of 100 hours. 10-40% of glucose oxidase, catalyse, and hemoglobin were released within 4 hours through complexation with PEI. It is unclear, whether the proteins were replaced by the polycation or released in a complex with PEI. [Pg.428]

Kulkarni, V.G. 1999. Modeling, Analysis, Design and Control of Stochastic Systems. Springer, Berlin. [Pg.133]

Baisden WT, Amundson R, Brenner DL, Cook AC, Kendall C, Harden JW (2002) A multi-isotope C and N modeling analysis of soil organic matter turnover and transport as a function of soil depth in a California annual grassland soil chronosequence. Global Biogeochem Cycles 16 1135. doi 10.1029/2001GB001823... [Pg.211]

Bendor, E. A. An Introduction to Mathematical Modeling. John Wiley, New York (1978). Bequette, B. W. Process Dynamics Modeling, Analysis, and Simulation. Prentice-Hall, Englewood Cliffs, NJ (1998). [Pg.73]

Giant dipole resonance. Isovector giant resonances contain information about the SE through the restoring force. In particular the excitation of the isovector giant dipole resonance (GDR) with isoscalar probes has been used to extract A R/R [32], In the distorted wave Bom approximation optical model analysis of the cross section the neutron and proton transition densities are needed as an input. For example, in the Goldhaber-Teller picture these are... [Pg.107]

Welch, C. (2007). HyDIVE (Hydrogen Dynamic Infrastructure and Vehicle Evolution) model analysis. Hydrogen Analysis Workshop, August 9—10. Washington ... [Pg.453]


See other pages where Model analysis is mentioned: [Pg.421]    [Pg.88]    [Pg.357]    [Pg.257]    [Pg.74]    [Pg.143]    [Pg.346]    [Pg.478]    [Pg.479]    [Pg.479]    [Pg.218]    [Pg.268]    [Pg.574]    [Pg.348]    [Pg.340]    [Pg.290]    [Pg.221]    [Pg.4]    [Pg.232]    [Pg.248]    [Pg.273]    [Pg.596]    [Pg.890]    [Pg.6]    [Pg.529]   
See also in sourсe #XX -- [ Pg.409 ]




SEARCH



2 kinetic analysis method model system complexity

A Chemical Informatics Domain Analysis Object Model

A Comparative Approach to Analysis and Modeling of Cardiovascular Function John K-J. Li, Ying Zhu, Abraham Noordergraaf

A3 Dynamic Process Model Analysis

ASPEN model analysis

Absorption model dependent analysis

Abundance analysis model atmosphere

Accident Analysis and Modeling

Activity analysis model, increasing

Analysis Dataset Models

Analysis fixed effect model

Analysis of Kinetic Models for Chemical Reaction Systems

Analysis of Model Behavior

Analysis of Premalignant Lesions Using the TSCE Model

Analysis of Variance (ANOVA) for Linear Models

Analysis of Variance for Regression Models

Analysis of covariance model

Analysis of the Measures and Model Fit

Analysis of the model-Hamiltonian

Analysis random effect model

Analysis with Autosegmental models

Analysis-of-variance model

Applications of Free Wilson Analysis and Related Models

Applications of Response Surface Techniques to Uncertainty Analysis in Gas Kinetic Models

Assembly models Analysis

Automated fault tree analysis model-based system

Bifurcation Analysis of the Flash Cascade Model

Box model analysis

CAPE-ModE Functional Analysis using Use Case Modeling

Canonical Analysis of Response Surface Models

Chemical model determination factor analysis

Comparative Molecular Field Analysis models

Compartment models versus non-compartmental analysis

Complex kinetic models, rigorous analysis

Complex pore, analysis model

Compositional analysis alternative models

Conceptual modelling data analysis

Cylindrical-material model finite-element analysis

DCC Model Lattice Parameter and Lns-Mossbauer Data Analysis

Data Analysis Quantitative modeling

Data Analysis by Modelling

Data Modeling and Analysis

Data analysis specific models

Discriminant analysis multivariate models

Discriminant analysis nonlinearity model

Distributed moment analysis potential models

Dose-effect analysis pharmacodynamic models

Dynamic analysis and model reduction

EXAMS (exposure analysis modeling

EXAMS (exposure analysis modelling

Effects analysis model, explanation

Electrode Models Based on a Mass Transfer Analysis

Electronic structural model analysis

Error analysis, inverse modeling

Error analysis, model

Event tree models, MORT analysis

Evolving factor analysis data modeling

Experimental data modeling principal component analysis

Exposure analyses modeling system

Exposure analyses modeling system EXAMS)

Extended Analysis of Modeling for Process Operation

Extraction process model analysis

Failure Modes Effects Analysis process modelling

Fatigue modeling analysis

Fault tree analysis model-based system

Financial analysis model

Finite element analysis (FEA) modelling of fiber-reinforced polymer (FRP) repair in offshore risers

Finite element analysis computer model

Finite element modeling analysis

Finite-element analysis model detail

Flux balance analysis metabolic model

Frequency analysis Markov models

Frontal Analysis, Displacement and the Equilibrium-Dispersive Model

Functional analysis reaction model scheme

General methodology for multiscale analysis, modeling, and optimization

Global analysis data modeling

Graph model analysis

Graph theory model analysis

Growth Analysis and Modeling

Heat exchanger model analysis

Hopf bifurcation analysis with Arrhenius model birth and growth of oscillations

Human Reliability Analysis Models

Hybrid modeling problem analysis

Interest-rate models bond analysis

Interpretation and Analysis of Spectra using Molecular Modelling

Inverse models/modeling error analysis

Kinetic Data Analysis and Evaluation of Model Parameters for Uniform (Ideal) Surfaces

Kinetic analysis modelling

Kinetic analysis models

Kinetic analysis, diffusion models

Kinetic analysis, geometric models

Kinetic model sensitivity analysis

Kinetic modeling dynamic flux analysis

Kinetic modeling steady state approximation, analysis

Kinetic models and their analysis

Learning model analyses

MFTA Models in Biotarget and Drug Action Analysis

Markovian model, statistical analysis

Mathematical modeling and analysis

Metabolic model analysis

Metabolic modeling analysis

Metabolic modeling stoichiometric analysis

Metabolic modeling topological network analysis

Microkinetic Model Analysis

Mode Analysis and Generalized Rouse Model

Model Hierarchy and Its Importance in Analysis

Model catalysts surface analysis

Model compound analysis

Model compound analysis, nuclear

Model dependent analysis

Model exposure analysis modeling system

Model finite element analysis

Model for Gene Network Analysis

Model pollutant analysis

Model quality analysis

Model regression analysis

Model-based analyses

Model-free analyses

Model-free analyses limitations

Model-free kinetic analysis

Modeling Methods for Detailed Local Analysis

Modeling Methods for Large Global Structural Analysis

Modeling analysis

Modeling and Analysis

Modeling and Experimental Analysis of Single Electrode Particles

Modeling and Mechanical Analysis of Fluoropolymer Components

Modeling and the Computer Numerical Analysis vs Simulation

Modeling energy, analysis

Modeling sensitivity analysis

Modeling solubility thermodynamic analysis

Modelling Stochastic Processes with Time Series Analysis

Modelling and analysis of the CRTM-1 process

Models Derived from Laws and Mathematical Analysis

Models for analysis

Models of reactions with diffusion and their analysis

Molecular Recognition in Biology: Models for Analysis of Protein-Ligand

Molecular modeling conformational analysis

Molecular modelling conformational analysis

Molecular modelling conformational analysis energy

Monte Carlo risk analysis modeling

More familiar models distance-energy analyses

Multilinear modeling analysis

Multiple Feature Tree Models Applications in HTS Data Analysis

Multivariate statistical models Discriminant analysis

Multivariate statistical models Neural-network analysis

Multivariate statistical models Partial least square analysis

Noncompartmental modeling analysis

Nonlinear model analysis

Nuclear magnetic resonance model compound analysis

Numerical Analysis Based on the Model

Numerical Analysis of the Equilibrium-Dispersive Model

One-Dimensional Fuel Cell Thermal Analysis Model

Parallel factor analysis model

Partial least squares model analysis

Partial least squares model chemometrical analysis

Particular risk analysis modelling process

Pharmacokinetic-pharmacodynamic model sensitivity analyses

Pharmacokinetics model dependent analysis

Polymer models, structural analysis

Population Analysis for Statistical Model Comparison

Predictive models error analysis

Principal component analysis of kinetic models

Principle component analysis model

Probit Analysis Models Used for Fitting Response Data

Quantitative analysis mathematical model

Random-effects models/analysis estimates from

Reaction modeling water analysis

Regression analysis error models

Regression analysis model refinement

Regression analysis of the initial model

Risk Analysis Model

Root cause analysis model

Root cause analysis model tools

Separator model analysis

Similitude, Dimensional Analysis and Modelling

Simple carrier, analysis model

Simple linear model analysis

Simulation Model for Analysis and Design of Fuel Cells

Source models Consequence analysis

Species based models, uncertainty analysis

Specific Application Petrogenic Modelling Based on Bulk Rock Analysis

Specification Analysis and Model Selection

Spectral modelling techniques spectrum analysis

Spectrum modelling approaches from additive to analysis-resynthesis and formant

Stability Analysis of the Logistic Model

Stage-appropriate analysis model

Statistical analysis model discrimination

Statistical analysis multiple-descriptor models

Statistical analysis of mathematical models

Statistical analysis single-descriptor models

Statistical models comparative molecular field analysis

Stirred tank, crystallization model data analysis, example

Stoichiometric analysis mathematical modeling

Stress and strength modelling finite element (FE) analysis

Structural kinetic modeling network analysis

Subchannel analysis models

Surfaces and Films for Model Catalytic Studies Using Surface Analysis Techniques

Task analysis model

The Additivity Model (Free Wilson Analysis)

Theoretical Analysis and Models for Heat Transfer

Theoretical Elaborations of the Rearside Attack Model Baldwins and Liotta-Burgess Trajectory Analyses

Thermal analysis models

Thermal stresses Stress analysis models

Thermometer model analysis

Time series analysis dynamic models

Tortuosity model analysis

Uncertainty Analysis of Gas Kinetic Models

Value analysis of the kinetic model

Water purification model analysis

Yield analysis modeling techniques

Zero-Order Fuel Cell Analysis Model

© 2024 chempedia.info