Metal tubes for

HDPE provides a superior moisture barrier but is less resilient. PP has a high level of heat resistance, and PET offers transparency and a high degree of product chemical compatibility. Thus, plastics and plastic laminates are generally preferred over metal tubes for packaging of pharmaceutical and cosmetic products. 

Although some workers found no significant differences in column efficiency between different kinds of metal tubes for dry-packed (tapping) columns of low... 

Thermal Spray Society http / /www.asm-intl.org/tss Tube Council of North America This New York trade group represents makers of plastic, laminate and metal tubes for dentifrice, cosmetic, pharmaceutical, household/industrial and food applications, http // www.tube.org... 

Typical designs are rising float in a tapered glass tube (for transparent fluids) rising float in a metal tube (for toxic/dangetous fluids). Inquiry sheet shorrld merrtion the following ... 

A New Series of Metal-Ceramie X-Ray Tubes for Low Power Applications. 

X-ray tubes are used in a broad variety of technical applications the classical application certainly is the radiographic inspection. For the penetration of high-Z materials, relatively high power is required. This lead to the development of X-ray tubes for laboratory and field use of voltages up to 450 kV and cp power up to 4,5 kW. Because of design, performance and reliability reasons, most of these maximum power stationary anode tubes are today made in metal-ceramic technology. 

Flence, the aims of the new series of metal-ceramic X-ray tubes for lower applications were ... 

Economic Aspects. Lithium metal is available commercially in ingots, special shapes, shot, and dispersions. Ingots are sold in 0.11-, 0.23-, 0.45-, and 0.91-kg sizes. Special shapes include foil, wire, and rod. Lithium is available in hermetically sealed copper cartridges and in sealed copper tubes for use in treating molten copper and copper-base alloys. Shot is sold in 1.19—4.76 mm (16—4 mesh) sizes. Lithium dispersions (30% in mineral oil) of 10—50-p.m particle size are used primarily in organic chemical reactions. Dispersions in other solvents and of other size fractions can be suppHed. 

The principle of the safety match is also used in the pull-wire fuse lighter used to start a fuse train for the ignition of fireworks items or more frequently for blasting work. This is a reversed pull match whereby the striker material is coated on a pull wire, and the match head material is within a small metal cup in a cardboard tube. Pulling the coated wire vigorously out of the device ignites the match mixture in the tube for fire transfer to the tubular fuse train. 

Explosion-bonded metals are produced by several manufacturers in the United States, Europe, and Japan. The chemical industry is the principal consumer of explosion-bonded metals which are used in the constmction of clad reaction vessels and heat-exchanger tube sheets for corrosion-resistant service. The primary market segments for explosion-bonded metals are for corrosion-resistant pressure vessels, tube sheets for heat exchangers, electrical transition joints, and stmctural transition joints. Total world markets for explosion-clad metals are estimated to fluctuate between 30 x 10 to 60 x 10 annually. 

Incandescent Lamps, Electronic Tubes, and Resistance Elements. Articles fashioned in any form from molybdenum and tungsten usually fall within the bounds of powder metallurgy. These metals normally are first produced as a powder. Both molybdenum and tungsten are used as targets in x-ray tubes, for stmctural shapes such as lead and grid wires in electron tubes, and as resistance elements in furnaces. 

The fifth component is the stmcture, a material selected for weak absorption for neutrons, and having adequate strength and resistance to corrosion. In thermal reactors, uranium oxide pellets are held and supported by metal tubes, called the cladding. The cladding is composed of zirconium, in the form of an alloy called Zircaloy. Some early reactors used aluminum fast reactors use stainless steel. Additional hardware is required to hold the bundles of fuel rods within a fuel assembly and to support the assembhes that are inserted and removed from the reactor core. Stainless steel is commonly used for such hardware. If the reactor is operated at high temperature and pressure, a thick-walled steel reactor vessel is needed. 

Alumina—graphite refractories, almost all continuous casting ware, have come into much greater use as continuous casting has spread in steelmaking. These refractories are used in shrouds that conduct the molten metal from the ladle to the tundish, in the subentry tubes that take the metal from the tundish to the mold, in isostatically pressed stopper rods, and in shroud tubes for slab and bloom casters. The alumina—graphite compositions are used in these products because of the thermal-shock resistance and corrosion resistance they impart to the product. 

Ethyl chloride can be dehydrochlorinated to ethylene using alcohoHc potash. Condensation of alcohol with ethyl chloride in this reaction also produces some diethyl ether. Heating to 625°C and subsequent contact with calcium oxide and water at 400—450°C gives ethyl alcohol as the chief product of decomposition. Ethyl chloride yields butane, ethylene, water, and a soHd of unknown composition when heated with metallic magnesium for about six hours in a sealed tube. Ethyl chloride forms regular crystals of a hydrate with water at 0°C (5). Dry ethyl chloride can be used in contact with most common metals in the absence of air up to 200°C. Its oxidation and hydrolysis are slow at ordinary temperatures. Ethyl chloride yields ethyl alcohol, acetaldehyde, and some ethylene in the presence of steam with various catalysts, eg, titanium dioxide and barium chloride. 

FIG. 6-12 Correction factor for PoiseiiiUe s equation at low pressures. Curve A experimental curve for glass capillaries and smooth metal tubes. (From Brown, et al, J. Appl. Phys., 17, 802 [1.946].) Curve B experimental curve for iron pipe (From Biggie, Couiiesy of E. I. du Pont de Nemours [Pg.641]

Bimetallic Tubes When corrosive requirements or temperature conditions do not permit the use of a single alloy for the tubes, bimetalhc (or duplex) tubes may be used. These can be made from almost anv possible combination of metals. Tube sizes and gauges can be varied. For thin gauges the wall thickness is generally divided equally between the two components. In heavier gauges the more expensive component may comprise from a fifth to a third of the total thickness. 

Indirect. steam-tube dryer This is a bare metal cylinder provided with one or more rows of metal tubes installed longitudinally in the shell. It is suitable for operation up to available steam temperatures or in processes requiring water cooling of the tubes. 

Hollomon s ethos, combined with his ferocious energy and determination, and his sustained determination to recruit only the best researchers to join his group, over the next 15 years led to a sequence of remarkable innovations related to materials, including man-made diamond, high-quality thermal insulation, a vacuum circuit-breaker, products based on etched particle tracks in irradiated solids, polycarbonate plastic and, particularly, the Lucalox alumina envelope for a metal-vapour lamp. (Of course many managers besides Hollomon were involved.) A brilliant, detailed account of these innovations and the arrangements that made them possible was later written by Guy Suits and his successor as director, Arthur Bueche (Suits and Bueche 1967). Some of these specific episodes will feature later in this book, but it helps to reinforce the points made here about Hollomon s coneeption of broad research on materials if I point out that the invention of translucent alumina tubes for lamps was... 

---