Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Material Safely Data Sheets

The above data should be useful for tlie planning to be accomplished by tlie local emergency planning committee and first responders, especially fire departments and HAZMAT teams. Both tlie hazards analysis (discussed in detail in Parts II and IV) and tlie development of emergency countermeasures should be facilitated by the availability of MSDS information. If significant new information regarding a chemical is discovered, revised material safely data sheets must be submitted. [Pg.60]

Monsanto Industrial Chemicals Co. Material Safely Data Sheet. FYI-OTS-068 5-0402 FLWP Seq G. Washington, DC, US Environmental Protection Agency, Office of Toxic Substances, 1985... [Pg.542]

Provided the vacuum pump exhaust is appropriately vented and suitable caution is observed in cleaning out the cold trap, the VDP parylene process has an inherently low potential for operator contact wilh hazardous chemicals. Before using the process chemicals, operators must read and understand the current Material Safely Data Sheets, which are available from the manufacturers. [Pg.1765]

Material safely data sheets or list of MSDS chemicals submitted to SERC, LEPC, and local fire department [Section 311(d))... [Pg.44]

The Material Safely Data Sheet (MSDS) is a detailed information bulletin prepared by the manufacturer or importer of a chemical dial describes die ph> sic il and health hazards, routes of exposure, precautions for safe liaiidling and use, emergency and first-aid procedures, and control measures. [Pg.313]

Let s click on Mallinckrodi Baker." The materials safely data sheet pmvided will appear. Seroll "ethylene glycs>T for information yon desire. [Pg.168]

Materials Safe Data Sheet Environmental impact anal3rsis emission parameters... [Pg.342]

Surveyed companies share chemical data of a general nature for most chemicals (e.g., material safely data sheets [MSDS]) and good handling practices for some. However, detailed reactive chemical test data, such as thermal stability data-which can be valuable in identifying reactive hazards-are not typically shared. [Pg.246]

Be sure that there is a sufficient amount of referenced evidence. This may be valuable if a somewhat similar incident occurs at a later date. Some items to consider include plot plans, process flow sheefs, log sheefs, material safely data sheets, photos, reports from the emergency brigade. [Pg.410]

K. Solder, Material Safely Data Sheet for Water Soluble Soldering Flux. MSDS Number 1452, Des Plaines, IL, USA 1996, p. 1. [Pg.862]

Let s click on "Mallinckrodt Baker-ETHYLENE GLYCOL. The materials safely data sheet provided will appear. [Pg.162]

Dimethyl Ether Material Safely Data Sheet, Form No. P-4589-B, Praxair, Danbury, CT, October 1997. [Pg.377]

In general, the acute toxicity of halogenated flame retardants is quite low. Tables 11—14 contain acute toxicity information from various manufacturers material safety data sheets (MSDS) for some of the flame retardants and intermediates Hsted in the previous tables. The latest MSDS should always be requested from the suppHer in order to be assured of having up-to-date information about the toxicity of the products as well as recommendations regarding safe handling. [Pg.471]

Handling of Amines. Regulations governing the safe handling and shipping of amines in interstate commerce are given in U.S. Department of Transportation pubHcations (71). Specific information on the safe handling and hazards associated with a particular amine can be found in the Material Safety Data Sheet for that material. For further information on the safety of industrial material see also references 72 and 73. [Pg.264]

Those engaged in handling sulfuric acid should obtain detailed information on safe handling practices. Material Safety Data Sheets (MSDS) are available from U.S. and European manufacturers. [Pg.192]

Isocyanates. Isocyanates in general are toxic chemicals and require great care in handling. Oral ingestion of substantial quantities of isocyanates can be tolerated by the human body, but acute symptoms may develop from the inhalation of much smaller amounts. The inhalation of isocyanates presents a ha2ard for the people who work with them as weU as the people who Hve in the proximity of an isocyanate plant. Adequate control of exposure is necessary to achieve a safe working environment. The suppHers Material Safety Data Sheets (MSDS) have to be consulted for the most current information on the safe handling of isocyanates. [Pg.353]

Toxicity Data on Af- Vinyl-2-Pyrrolidinone. Results of a chronic inhalation study in rats warrant a review of industrial hygiene practices to assure that VP vapor concentrations are maintained at a safe level. One of the manufacturers, ISP, recommends that an appropriate workplace exposure limit be set at 0.1 ppm (vapor) (9). Additionally, normal hygienic practices and precautions are recommended, such as prompt removal from skin and avoidance of ingestion. In case of accidental eye contact, immediately flush with water for at least 15 minutes and seek medical attention. Refer to the manufacturers Material Safety Data Sheets for more detailed information. Table 3 provides some toxicity data. [Pg.523]

The use of safe materials is vital for barrier appHcations, particularly for food, medical, and cosmetics packaging. SuppHers of specific barrier polymers can provide the necessary details, such as material safety data sheets, to ensure safe processing and use of barrier polymers. [Pg.501]

Manufacturers of benzene are requited by federal law to pubHsh Material Safety Data Sheets (MSDS) that describe in detail the procedures for its safe handling. Benzene is classified as a flammable Hquid and should be stored away from any potential source of ignition. Fine and explosion hazard data for benzene are shown (91). [Pg.46]

Additional information on health and safety aspects should be sought by consulting material safety data sheets available from suppHers of the chemical in question. In addition, most suppHers of bleaching chemicals, upon request, provide on-site training sessions by experts on the safe use and handling of their products. [Pg.158]

Additional information may be had on storage of chemicals from several sources. Material Safety Data Sheets, for example, have specific instructions with regard to storage. The local fire inspector will have good suggestions, and much can be found in reference books. Above all, the laboratory operator should throughly familiarize himself with all chemicals to be used in order to develop a safe storage system. [Pg.46]

Houghton. 1992. Material Safety Data Sheet Houghton-Safe 5047-F. March 24, 1992... [Pg.341]

Material Safety Data Sheets (MSDS) An MSDS contains descriptive information on hazardous chemicals under OSHA s Hazard Communication Standard. The data sheets also provide precautionary information on safe handling, health effects, chemical and physical properties, emergency phone numbers, and first aid procedures. [Pg.323]

Facilities should obtain data about a substance from the chemical manufacturers Material Safety Data Sheets (MSDS) or from other published sources. In order to identify, evaluate, or respond safely to incidents involving hazardous... [Pg.47]

Before this experiment is carried out, the student must read the material safety data sheets (MSDS) for all the chemicals used as well as for the products. The instructor must approve that you have read and understood the MSDS for the safe handling of these materials. [Pg.11]


See other pages where Material Safely Data Sheets is mentioned: [Pg.59]    [Pg.120]    [Pg.535]    [Pg.59]    [Pg.120]    [Pg.535]    [Pg.406]    [Pg.264]    [Pg.202]    [Pg.409]    [Pg.461]    [Pg.4]    [Pg.208]    [Pg.540]    [Pg.245]    [Pg.131]    [Pg.246]    [Pg.280]    [Pg.342]   
See also in sourсe #XX -- [ Pg.43 ]




SEARCH



Data sheets

MSDS (Material Safely Data Sheets

© 2024 chempedia.info