Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Main drive

The variations in the main drive are in the choice of motor design. With modern electrical developments the number of choices has expanded. These include  [Pg.80]

In processes using solvents, flameproof drives will be demanded. [Pg.80]

Some of the ways of mounting the motor have already been discussed. These include mounting on slide rails, on a sub-frame, mounting on the frame [Pg.81]


The production profile for oil or gas is the only source ofrevenueior most projects, and making a production forecast is of key importance for the economic analysis of a proposal (e.g. field development plan, incremental project). Typical shapes of production profile for the main drive mechanisms were discussed in Section 8.2, but this section will provide some guidelines on how to derive the rate of build-up, the magnitude and duration of the plateau, the rate of decline, and the abandonment rate. [Pg.208]

The constant demand for products such as Hquid fuels is the main driving force behind the petroleum industry (7,30). In fact, it is the changes in product demand that have been largely responsible for the evolution of the industry. [Pg.209]

Both the Power Industry and the petrochemical industries use the aircraft-type turbine. The Power Industry uses these units in a combined cycle mode for power generation especially in remote areas where the power requirements are less than 100 MW. The petrochemical industry uses these types of turbines on offshore platforms especially for gas re-injection, and as power plants for these offshore platforms, mostly due to their compactness and the ability to be easily replaced and then sent out to be repaired. The aeroderivative gas turbine also is used widely by gas transmission companies and petrochemical plants, especially for many variable speed mechanical drives. These turbines are also used as main drives for Destroyers and Cruise Ships. The benefits of the aeroderivative gas turbines are ... [Pg.19]

Industrial equipment is a continuing area of development for plastics. Pipes, pumps, valves and sight glasses, made from such materials as PVC, PTFE and poly-4-methylpent-l-ene, have become well established on account of their corrosion resistance. The nylons are used for such diverse applications as mine conveyor belts and main drive gears for knitting machines and paper-making equipment. These and other materials are widely used where such features as toughness, abrasion resistance, corrosion resistance, non-stick properties, electrical insulation capability and transparency are of importance. [Pg.14]

Amongst the products made by polymerisation casting are propellers for small marine craft, conveyor buckets used in the mining industry, liners for coal washing equipment and main drive gears for use in the textile and papermaking industries. [Pg.504]

Progress in research and development in the wood-based industry and in the adhesive industry has shown many successes during the last decades. On the other hand, many industrial requirements still require considerable and important developments in this area. The main driving forces today are cheaper , quicker and more complex . The first two are caused by the heightened competition in the above-mentioned industries and the attempt to minimize costs while maintaining a certain level of product quality and performance. The key word more complex stands for new and specialized products and processes. Adhesives play a central role in wood-based panel production. The quality of bonding, and hence the properties of the wood-based panels, are determined mainly by the type and quality of the adhesive. Development in wood-based panels, therefore, is always linked to development in adhesives and resins. [Pg.1039]

In the preceding section, it has been shown that considerable attention has been devoted to palladium as a heterogeneous catalyst. The present section describes the homogeneous palladium catalysts developed for hydrogenation of NBR. The main drive behind the development of various catalyst systems is to find suitable substituents of the Rh catalyst. Palladium complexes are much cheaper as compared with Rh and exhibit comparable activity and selectivity to Rh and Ru complexes. [Pg.564]

The rotors are eccentric in their rotation at the bottom of the motor section. Thus, the connecting rod section provides a flexible coupling between the rotor and the main drive shaft located in the thrust and radial bearing section. The main drive shaft has the drill bit connected to its bottom end. [Pg.885]

The catalytic reactions occur in the vapor phase. Cracking reactions begin as soon as the feed is vaporized. The expanding volume of the vapors that are generated are the main driving force to carry the catalyst up the riser. [Pg.8]

Performance requirements, environmental issues, and avaUabUity/cost of the material will mainly drive material requirement in the future. In order to face the huge tire wastage problem causing major hazards to the environment, future development in mbbery materials will be focused on development of thermoplastic polymer so that used polymer could be recovered by thermal treatment and separation, biological degradation by radiation/addition of chemical into the mbber compound that could be activated by exposure to radiation and development of biopolymer. [Pg.930]

The previously discussed model suggests how realistic is the assumption of N2+ ion bombardment as the main driving force of growth kinetics and nitrogen incorporation in a-C(N) H film growth. [Pg.245]

Miniaturisation of scientific instruments, following on from size reduction of electronic devices, has recently been hyped up in analytical chemistry (Tables 10.19 and 10.20). Typical examples of miniaturisation in sample preparation techniques are micro liquid-liquid extraction (in-vial extraction), ambient static headspace and disc cartridge SPE, solid-phase microextraction (SPME) and stir bar sorptive extraction (SBSE). A main driving force for miniaturisation is the possibility to use MS detection. Also, standard laboratory instrumentation such as GC, HPLC [88] and MS is being miniaturised. Miniaturisation of the LC system is compulsory, because the pressure to decrease solvent usage continues. Quite obviously, compact detectors, such as ECD, LIF, UV (and preferably also MS), are welcome. [Pg.726]

The formation of the linear polymer from the cyclic monomer requires a decrease of the free energy. Because usually entropy is lost during polymerization, the main driving force for the ring-opening process is the release of the angular strain upon conversion of the cycles to linear macromolecules. Thus, a majority of three- and four-membered rings can be readily and quantitatively converted into polymers. [Pg.86]

Scheme 8 displays reactions where 43 behaves as a source of a Zr(II) derivative.30 They can be formally viewed as oxidative additions to the [p-Bu -calix[4]-(0Me)2(0)2Zr] fragment. The main driving force in the case of ketones is the high oxophilicity of the metal, which induces the reductive coupling of benzophenone leading to 45, or the addition of dibenzoyl causing the formation of the dioxo-metallacycle in 46, which contain a C-C double bond. It has to be mentioned that... [Pg.183]

Nonell and Borrell6 also study the evolution of public drug expenditure between 1986 and 1997 and break down its growth into five factors demography, coverage, index of prices actually paid for the products financed, number of prescriptions per insured person, and the real cost per prescription calculated as a remainder. They conclude that the dynamics of the average cost per prescription is the main driving force behind expenditure (p. 123). [Pg.222]

While the main driving force in [43, 44] was to avoid direct particle transfers, Escobedo and de Pablo [38] designed a pseudo-NPT method to avoid direct volume fluctuations which may be inefficient for polymeric systems, especially on lattices. Escobedo [45] extended the concept for bubble-point and dew-point calculations in a pseudo-Gibbs method and proposed extensions of the Gibbs-Duhem integration techniques for tracing coexistence lines in multicomponent systems [46]. [Pg.361]

The simplest IR sensor would consist of a source, a sample interface and a detector. Although quite sensitive, such an arrangement would have no selectivity as any IR absorbing substance would cause an attenuation of the detected radiation. To get the selectivity that is a main driving force behind the application of IR systems, the radiation has to be spectrally analysed. This can be accomplished either by measurement at discrete wavelengths or, for multi-component sensors or samples containing (potentially) interfering substances, by full spectral analysis of the collected radiation. [Pg.141]

According to (57), the main driving force for the reaction in non-protic media is the formation of a tribromide ion from bromine and the developing bromide. Kinetic (Ruasse et al., 1986) and thermodynamic (Bienvenue-Goetz et al., 1980) data on equilibrium (58) are therefore relevant to the effect of non-protic solvents on bromination rates. [Pg.277]


See other pages where Main drive is mentioned: [Pg.1094]    [Pg.162]    [Pg.82]    [Pg.403]    [Pg.403]    [Pg.403]    [Pg.404]    [Pg.563]    [Pg.354]    [Pg.152]    [Pg.14]    [Pg.486]    [Pg.211]    [Pg.648]    [Pg.272]    [Pg.58]    [Pg.885]    [Pg.68]    [Pg.1173]    [Pg.199]    [Pg.299]    [Pg.4]    [Pg.240]    [Pg.113]    [Pg.382]    [Pg.20]    [Pg.184]    [Pg.272]    [Pg.74]    [Pg.277]    [Pg.120]    [Pg.326]    [Pg.269]   


SEARCH



Competition as the main driving force

Power Recovery Expanders for FCC Units in Main Air Blower or Generator Drive Service

What is the main driving force for sintering

© 2024 chempedia.info