Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Load analysis

A key problem in experimental load analysis is the translation of the data yielded from the measurement system (as represented by the load histories in Figure 4.21) into an... [Pg.173]

Atkeson T, Axelrad D, Pollman C, Keeler G. 2003. Integrating atmospheric mercury deposition and aquatic cycling in the Florida Everglades an approach for conducting a total maximum daily load analysis for an atmospherically derived pollutant. Tallahassee (FL) Florida Department of Environmental Protection (FDEP) (http //www. floridadep.org/labs/mercury/index.htm). [Pg.82]

The peak rebound reaction is -2.33 kips (-10.36 kN) at t - 0.05 sec. Use the dynamic reaction for the roof in-plane loads analysis. [Pg.80]

A part-load analysis will not be done. As a note, it would be a good assumption to fix SOFC temperature constraints for a part-load analysis as well, since operating the fuel cell at a fixed temperature is better for the durability of the fuel cell. However, it would not be a good assumption to constrain other parameters, such as the turbomachineiy efficiencies, for a part-load or dynamic analysis. [Pg.248]

Drescher, A. (1991). Analytical Methods in Bin-Load Analysis. Amsterdam Elsevier. [Pg.368]

The recent approval and implementation of the European Water Framework Directive further emphasizes the role of biota as a tool for assessing aquatic environmental quality, in that it strives not only for the improvement of the chemical quality status of water bodies but also for the rehabilitation of their ecological status. In the light of these recommendations, it becomes essential to use biota to assess not only the chemical status of water bodies through contaminant load analysis, but also their ecological status, in what must be an integrated, multidisciplinary approach. [Pg.104]

The ChemHTS-1 module of Chem-X provides integration to plate samples, copy plates, load analysis validation data and request biological testing. A simple set of ORACLE tables ensure speed and flexibility (tables 5-7). [Pg.188]

Kler, S. C., R. J. P. Brierley, and M. C. G. Del Cerro, "Downcomer Performance at High Pressure, High Liquid Load Analysis of Industrial Data on Sieve and Valve Trays, 7. Chem. E. Symp. Ser. 104, 1987, p. B391. [Pg.694]

Reynolds, D.P. and Lord, M. 1992. Interface load analysis for computer-aided design of below-knee prosthetic sockets. Med. Biol. Eng. Comput. 30 419. [Pg.1137]

Method 2 utilizes the local load analysis developed by Bijlaard in the 1950s, which was further refined and described in the WRC Bulletin 107. This procedure uses the principles of flexible load surfaces. This procedure is more accurate, but more mathematically rigorous as well. [Pg.111]

COOLING LOAD ANALYSIS OF UNDERGROUND REFRIGERATION IN ZHUJIXI COAL MINE... [Pg.373]

For short-term or undrained loading analysis (( ) = 0) the factor N is zero and the factor N c is selected from Figure 10.43 for the anticipated relative embedment depth D/B and soil cohesion (a distance B above the anchor) in the soft rupture zone. The soil cohesion can be measured in place with a field vane or cone penetrometer or determined from laboratory tests on core samples such as the unconfined compression or triaxial CU test. If soil strength data are not available, the strength profile can be estimated using d CTot = 0.30, where the vertical effective stress (o J is estimated using a buoyant unit weight of 4 kN/m. ... [Pg.434]

Cai S.H. Jiao Z.S.1997. Behavior and ultimate load analysis of multi-barrel tube-confined concrete columns. Journal of Building Structures 18(6) 20-25 (in Chinese). [Pg.369]

Kidane, S., Li, G., Helms, J.E., Pang, S.S. and Woldesenbet, E. (2003) Analytical buckling load analysis of grid stiffened composite cylinders. Composites Part B Engineering, 33, 1-9. [Pg.17]

The methodology of the integrated valve concept includes the guarantee for readiness for function during lifetime. In nuclear power plants inspections of the function of the whole system is performed periodically beginning with power supply and I C including the shut-off element in the valve. The results are compared with the base measurements. For evaluation of the results of periodic examinations and inspection the model for function and the model for load analysis as well as the design evaluation are used. [Pg.93]

Naqvi, R., Wolf, J. and Holland, O. (2007) Part-load analysis of a chemical looping combustion (CLC) combined cycle with CO2 capture. Energy, 32, 360-370. [Pg.173]

There is still an effort in order to improve piping elastic calculations. A work on mechanical behaviour of a T junction or a nozzle is in progress with the development of a limit load analysis method and the setting up of the system of elastic problem equations. The resolution of this system in order to obtain an analytical solution raises some difficulties. [Pg.69]


See other pages where Load analysis is mentioned: [Pg.173]    [Pg.375]    [Pg.385]    [Pg.10]    [Pg.100]    [Pg.972]    [Pg.862]    [Pg.145]    [Pg.191]    [Pg.64]    [Pg.639]    [Pg.691]    [Pg.164]    [Pg.313]    [Pg.399]    [Pg.254]    [Pg.39]    [Pg.286]    [Pg.24]    [Pg.375]    [Pg.92]    [Pg.906]    [Pg.178]    [Pg.639]    [Pg.691]   
See also in sourсe #XX -- [ Pg.639 ]

See also in sourсe #XX -- [ Pg.639 ]




SEARCH



© 2024 chempedia.info