International Organisation for

ISO Recommendation R-513, Application of Carbides for Machining by Chip Eemoval, 1st ed.. International Organisation for Standardization, Nov. [Pg.447]

International Vocabulary of basic and General Terms in Metrology. 2nd ed. International Organisation for Standardisation, 1993. [Pg.1174]

ISO 5167-1 1991. Measurement of Fluid Flow by Means of Pressure Differential Devices-Fart 1 Orifice Plates, Nozzles and Venturi Tubes Inserted in Circular Cross-section Conduits Running Full. International Organisation for Standardisation, 1991. [Pg.1175]

ISO 4053-1 1977. Measurement of Gas Flow in Conduits—Tracer Methods—Part 1 Cjcncrai. International Organisation for Standardisation, 1977. [Pg.1175]

International Organisation for Standardisation Implants for Surgery—Metallic Materials — Wrought High Nitrogen Stainless Steel, Specification Number ISO 5832 Part 9, Geneva (1992)... [Pg.480]

ISO 14040 (2006) Environmental management - Life cycle assessment - Principles and framework. International Organisation for Standardisation (ISO), Geneve... [Pg.21]

ISO 78-2 (1999) International Organisation for Standarization Layout for standards - 2. Methods of chemical analysis. Geneva... [Pg.239]

Abbreviation for International Organisation for Standardization. ISO/TC45 is the Rubber Committee of the ISO and ISO/TC61 the Plastics Committee. [Pg.35]

To liaise with relevant international organisations for the purpose of communicating about reports on investigations of the alleged use of chemical weapons (IAUs) to coordinate the provision of assistance and to obtain and exchange relevant information and data and to conduct an IAU to establish the relevant facts related to the request for assistance12. [Pg.74]

The OPCW will cooperate with relevant international organisations for the delivery of assistance. Such a recommendation is based on a lack of resources within the OPCW to individually provide delivery of assistance, and the fact that it is not economical for the Organisation to seek a delivery capability. In addition, cooperation with international organisations and national agencies helps avoid a duplication of activities, particularly on the site of operations furthermore, the Organisation can utilise the experience of other international organisations. [Pg.78]

International organizations, 15 756-757 role in pesticide regulation, 18 540-541 International organic chemical industry economic patterns, 24 263-265 International Organisation for... [Pg.483]

International standards, 75 755-757 growing role of, 24 262 International Standards Organization (ISO). See also International Organisation for Standardization (ISO) ISO entries reliability and, 26 993 silicon carbide standards by, 22 537, 538 International Sugar Scale, 23 473 International System of Units (SI Units), 7 xi-xxvi 2-26 ix-xxiv. See also SI Units... [Pg.484]

ISO management system standards, in fine chemical production, 11 435. See also International Organisation for Standardization (ISO)... [Pg.495]

Methods of analysis adopted under this Directive should be edited in the standard layout for methods of analysis recommended by the International Organisations for Standardization. [Pg.96]

In 1992, the International Organisation for Standardisation established a technical committee on Environmental Management (TC207) to develop a series of standards on environmental management. This was subsequently published as the IS014000 series of standards. Although this is a field that is rapidly maturing, LCA has been criticized on a number of points. [Pg.193]

Source Council for the International Organisations for Medical Science. Safety Requirements for the First Use of New Drugs and Diagnostic Agents in Man. Geneva QOMS (WHO) 1983. [Pg.261]

According to the International Organisation for Standardisation (ISO) quality is the entirety of attributes and characteristics of a product or a service which are necessary to fulfil its defined or assumed requirements. As already indicated, quality can be seen to be more or less comprehensive, for which reason many organisations define or describe their commitment to quality in a so-called quality policy statement. A quality policy typically is based on three fundamental principles ... [Pg.303]

IUPAC, ISO, and AOAC International International Union of Pure and Applied Chemistry, International Organisation for Standardization, and Association of Official Analytical Chemists MU 4,8,16,17... [Pg.748]

The interchangeability of conical joints (cone and socket joints) is ensured by the use of a standard taper of 1 in 10 on the diameter in accordance with the recommendations of the International Organisation for Standardisation and of the various national standardising authorities. The brand name Quickfit is a registered trademark (J. Bibby Science Products Ltd) and used to describe... [Pg.53]

Recently there has been progress towards a universal acceptance of collaboratively tested methods and collaborative trial results and methods, no matter by whom these trials are organised. This has been aided by the publication of the IUPAC/ISO/AOAC Harmonisation Protocol on Collaborative Studies.14 That Protocol was developed under the auspices of the International Union of Pure and Applied Chemists (IUPAC) aided by representatives from the major organisations interested in conducting collaborative studies. In particular, from the food sector, the AO AC International, the International Organisation for Standardisation (ISO), the International Dairy Federation (IDF), the Collaborative International Analytical Council for Pesticides (CIPAC), the Nordic Analytical Committee (NMKL), the Codex Committee on Methods of... [Pg.56]

The proposed draft Standard is circulated by the secretariat to Codex Member countries and international organisations for comment. [Pg.269]

Dyed textiles are exposed to a variety of treatments during subsequent manufacturing steps and later in daily use. Standard test methods have been developed to evaluate the colorfastness, i.e., resistance of dyed textiles to the conditions they may endure. These test methods are maintained by the International Organisation for Standardization (ISO), Technical Committee 38, Subcommittee 1 (TC/ SCI). The Standard Test Methods are published as ISO Standard 105 [27],... [Pg.348]

Not many terms covering concepts in measurement have circulated over the last ten years in the chemical measurement community around the world so intensely as the term trace-ability. It appears in the title of CITAC (Cooperation on International Traceability in Analytical Chemistry) since 1993. It is addressed almost yearly in Workshops of EURACHEM (A Focus for Analytical Chemistry in Europe). Documents of ILAC (International Laboratory Accreditation Cooperation) require it to be used in the process of accreditation. Standards and Guides of ISO (the International Organisation for Standardization) mention them frequently and insistingly. [Pg.301]

ISO Fire resistance tests, elements of building construction, ISO 834, 1999, International Organisation for Standardization. [Pg.162]

EN ISO 17025 (1999) General requirements for the competence of testing and calibration laboratories. International Organisation for Standardisation. [Pg.247]

Nowadays the so-called practical unit system is in general used. It is a really coherent system, which means that no multiplication factors are introduced in the definition of derived units as soon as the base units have been defined. In 1969 this coherent system was recommended by the International Organisation for Standardisation as International System of Units (SI = Systeme International d Unites) and in 1973 it was accepted as such, according to International Standard ISO 1000. [Pg.53]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...