Incompatible Chemicals metals

Earthquakes provide the ultimate test of the storage of incompatible chemicals and are sometimes followed by fires in chemical stores. Very few causes of ignition are found alkali metals halogen oxysalts in conjunction with strong acids and sulphuric or nitric acid and cellulose (wood flooring). These usually then ignite vapours of flammable solvents. 

Stability. Incompatible with metals such as aluminium and copper, halogenated organics, strong acids, oxidizing materials and absorbent materials (cellulose, sawdust) (Dow Chemical Company, 1999a)... 

Mixtures of 10-15 percent with air may be ignited with difficulty. Moderately explosive when exposed to sparks or flame. Forms explosive mixtures with air within narrow limits at atmospheric pressure, with wider limits at higher pressure. The explosive sensidvity of mixtures with air may be increased by the presence of aluminum, magnesium, zinc, or their alloys. Incompatible with metals, dimethyl sulfoxide, ethylene oxide. To fight fire, use foam, water, CO2, dry chemical. When heated to decomposition it emits toxic fumes of Br". See also BROMIDES. 

Good laboratory safety practice requires that incompatible chemicals be stored, transported, and disposed of in ways that will prevent their coming together in the event of an accident. Tables 1 and 2 give some basic guidelines for the safe handling of acids, bases, reactive metals, and other chemicals. Neither of these tables is exhaustive, and additional information on incompatible chemicals can be found in the following references. 

CHEMICAL PROPERTIES Attacks some forms of plastics, rubber and coatings incompatible with metals, strong oxidants, bases lithium and sodium-potassium alloys. 

EXPLOSION and FIRE CONCERNS nonflammable NFPA rating (not rated) explosive reaction with crown ethers or potassium hydroxide violent reaction with lithium, sodium-potassium alloy, acetone, or bases incompatible with metals, caustic alkali, and strong oxidants decomposition emits highly toxic gases and vapors (such as hydrogen bromide and bromine) use dry chemical, carbon dioxide, water spray, fog or foam for firefighting purposes. 

At first glance, cold, hard metal seems incompatible with warm, flowing life. But even the nutrition label on your cereal box shows that you need metals hke iron and calcium to live. Chemically, metals and carbon-rich life molecules meet through... 

HMTD has been patented as a primary explosive for detonators [123] but, due to its low physical and chemical stability and incompatibility with metals, has never been used [17, 50]. However, Danilov et al. have reported that it can be used in war situations when short turnaround time is expected [38]. Recently, investigations of HMTD as a green primary explosive for laser-initiated appUcations have been carried out by Ilyushin et al. [108, 124]. 

Adsorbers, distillation colunuis, and packed lowers are more complicated vessels and as a result, the potential exists for more serious hazards. These vessels are subject to tlie same potential haz. uds discussed previously in relation to leaks, corrosion, and stress. However, llicse separation columns contain a wide variety of internals or separation devices. Adsorbers or strippers usually contain packing, packing supports, liquid distributors, hold-down plates, and weirs. Depending on tlie physical and chemical properties of the fluids being passed tlirough tlie tower, potential liazards may result if incompatible materials are used for llie internals. Reactivity with llie metals used may cause undesirable reactions, which may lead to elevated temperatures and pressures and, ullinialely, to vessel rupture. Distillation columns may contain internals such as sieve trays, bubble caps, and valve plates, wliicli are also in conlacl with tlie... 

Storage stability Store DF in lead and wax-lined carboys, high-density polyethylene bottles, or nickel-lined containers in well-ventilated areas. Never store DF with alcohols DF will react with alcohols to form lethal chemicals, such as crude GB. Incompatible with water, glass, concrete, most metals, natural rubber, leather, and organic materials like glycols. The acidic corrosive hydrolysis products may react with metals, such as Al, Pb, and Fe, to give off hydrogen gas, a potential fire and explosive hazard. 

Two substances which have no hazardous reactivity properties in themselves can become dangerous when mixed. Certain groups of chemicals are likely to react with common substances such as air, water, acids, alkalies, and metals. Information about the possibility of such reactions is available in manuals on hazardous chemical reactions [35, 61, 62]. Examples of substances having incompatibility hazards when mixed are shown on Table 2.14. Applications of CHETAH to mixture instability determination [63,64] and to binary incompatibility [65] have been published. 

Chemical Incompatibility Hazards While N2 and C02 may act as inerts with respect to many combustion reactions, they are far from being chemically inert. Only the noble gases (eg., Ar and He) can, for practical purposes, be regarded as true inerts. Frank (Frank, Inerting for Explosion Prevention, Proceedings of the 38th Annual Loss Prevention Symposium, AIChE, 2004) lists a number of incompatibilities for N2, C02, and CO (which can be present in gas streams from combustion-based inert gas generators). Notable incompatibilities for N2 are lithium metal and titanium metal (which is reported to burn in N2). C02 is incompatible with many metals (eg., aluminum and the alkali metals), bases, and amines, and it forms carbonic acid in water,... 

Another key point is selective chemical functionalization at one or both ends, or inside the chain (see scheme 2).m Thus, thiolo functions can serve as clips to create contact with metal surfaces or particles. Quantitative end functionalization of the rigid-rod on one end is a key step toward rod-coil copolymer synthesis (see scheme 3),131 and such a covalent coupling of incompatible polymer blocks is relevant for supramolecular organization.141... 

Despite extensive studies, the photovoltage or the solar-to-chemical energy conversion efficiency still remains relatively low. The main reason is that it is very difficult to meet all requirements for high efficiency. For example, high catalytic activity and sufficient passivation at the electrode surface are incompatible. It was found, however, that a semiconductor electrode modified with small metal particles can meet all the requirements and thus becomes an ideal type semiconductor electrode. Cu, Ag, and Au were chosen because they were reported to work as efficient electrocatalysts for the C02 reduction. p-Si electrodes modified with these metals in C02-staurated aqueous electrolyte under illumination produce mainly methane and ethylene.178 This is similar to the metal electrodes but the metal-particle-coated electrodes work at approximately 0.5 V more positive potentials, contrary to continuous metal-coated p-Si electrodes. 

Separate acids from incompatible materials such as bases, active metals (ex. sodium, magnesium, potassium) and from chemicals which can generate toxic gases when combined (ex. sodium cyanide and iron sulfide). 

---