Hydrocarbons overview

Dehydrogenation of isobutane to isobutylene is highly endothermic and the reactions are conducted at high temperatures (535—650°C) so the fuel consumption is sizeable. Eor the catalytic processes, the product separation section requires a compressor to facHitate the separation of hydrogen, methane, and other light hydrocarbons from-the paraffinic raw material and the olefinic product. An exceHent overview of butylenes is avaHable (81). 

Heat is produced by chemical reaction in a reaction zone. The heat is transported, mainly by conduction and molecular diffusion, ahead of the reaction zone into a preheating zone in which the mixture is heated, that is, preconditioned for reaction. Since molecular diffusion is a relatively slow process, laminar flame propagation is slow. Table 3.1 gives an overview of laminar burning velocities of some of the most common hydrocarbons and hydrogen. 

In Table 13.1 an overview of the resistance against ASTM 3 oil (70 h at 150°C) and fuel C (70 h at 150°C) for a large number of industrially applied mbbers is presented [6] (additional data are taken from reference [7]). Rubbers such as EPDM, polyisoprene (IR), butyl mbber (HR), NR, and BR have a high oil swell, due to their hydrocarbon stmcture, which is very similar to the stmcture of the oil itself. Rubbers such as CR, NBR, HNBR, and ECO have a much lower oil swell, because the polarity of these mbbers is higher. The oil resistance can also be improved by lowering... 

Surface science studies have generated much insight into how hydrocarbons react on the surfaces of platinum single crystals. We refer to Somorjai [G.A. Somor-jai. Introduction to Surface Chemistry and Catalysis (1994), Wiley, New York] for a detailed overview. Also, the reactions of hydrocarbons on acidic sites of alumina or on zeolites have been studied in great detail [H. van Bekkum, E.M. Flanigan and J.C. Jansen (Eds.), Introduction to Zeolite Science and Practice (1991), Elsevier, Amsterdam],... 

In the USA, the Clean Air Act of 1970 established air-quality standards for six major pollutants particulate matter, sulfur oxides, carbon monoxide, nitrogen oxides, hydrocarbons, and photochemical oxidants. It also set standards for automobile emissions - the major source of carbon monoxide, hydrocarbons, and nitrogen oxides. An overview of the major standards is given in Tab. 10.2. The levels of, for example, the European Union (1996) are easily achieved with the present catalysts. The more challenging standards, up to those for the ultralow emission vehicle, are within reach, but zero-emission will probably only be attainable for a hydrogen-powered vehicle. 

CO oxidation and the reaction between CO -t NO have been extensively studied. Much less is known about hydrocarbon oxidation, and the role of hydrocarbons in reducing NO is only beginning to be explored. Surface science studies with reactions on well-defined single-crystal surfaces have contributed significantly to our understanding, for an overview see B.E. Nieuwenhuys, Adv. Catal. 44 (1999) 259. 

This overview is organized into several major sections. The first is a description of the cluster source, reactor, and the general mechanisms used to describe the reaction kinetics that will be studied. The next two sections describe the relatively simple reactions of hydrogen, nitrogen, methane, carbon monoxide, and oxygen reactions with a variety of metal clusters, followed by the more complicated dehydrogenation reactions of hydrocarbons with platinum clusters. The last section develops a model to rationalize the observed chemical behavior and describes several predictions that can be made from the model. 

This section covers recent advances in the application of three-phase fluidization systems in the petroleum and chemical process industries. These areas encompass many of the important commercial applications of three-phase fluidized beds. The technology for such applications as petroleum resid processing and Fischer-Tropsch synthesis have been successfully demonstrated in plants throughout the world. Overviews and operational considerations for recent improvements in the hydrotreating of petroleum resids, applications in the hydrotreating of light gas-oil, and improvements and new applications in hydrocarbon synthesis will be discussed. 

Baumann, P.C. and D.M. Whittle. 1988. The status of selected organics in the Laurentian Great Lakes an overview of DDT, PCBs, dioxins, furans, and aromatic hydrocarbons. Aquat. Toxicol. 11 241-257. 

Abstract The basic principles of the oxidative carbonylation reaction together with its synthetic applications are reviewed. In the first section, an overview of oxidative carbonylation is presented, and the general mechanisms followed by different substrates (alkenes, dienes, allenes, alkynes, ketones, ketenes, aromatic hydrocarbons, aliphatic hydrocarbons, alcohols, phenols, amines) leading to a variety of carbonyl compounds are discussed. The second section is focused on processes catalyzed by Pdl2-based systems, and on their ability to promote different kind of oxidative carbonylations under mild conditions to afford important carbonyl derivatives with high selectivity and efficiency. In particular, the recent developments towards the one-step synthesis of new heterocyclic derivatives are described. 

The third and last part of the book (Chapters 12-16) deals with zeolite catalysis. Chapter 12 gives an overview of the various reactions which have been catalyzed by zeolites, serving to set the reader up for in-depth discussions on individual topics in Chapters 13-16. The main focus is on reactions of hydrocarbons catalyzed by zeolites, with some sections on oxidation catalysis. The literature review is drawn from both the patent and open literature and is presented primarily in table format. Brief notes about commonly used zeolites are provided prior to each table for each reaction type. Zeolite catalysis mechanisms are postulated in Chapter 13. The discussion includes the governing principles of performance parameters like adsorption, diffusion, acidity and how these parameters fundamentally influence zeolite catalysis. Brief descriptions of the elementary steps of hydrocarbon conversion over zeolites are also given. The intent is not to have an extensive review of the field of zeolite catalysis, but to select a sufficiently large subset of published literature through which key points can be made about reaction mechanisms and zeolitic requirements. 

Fishbein, L. An overview of environmental and toxicological aspects of aromatic hydrocarbons. III. Xylene, Sci. Total Environ., 43(1/2) 165-183, 1985. 

While we believe our discussions of nitramine and nitrate ester synthesis to be comprehensive, it would be quite impossible to have a comprehensive discussion of aromatic nitration in this short chapter - published studies into aromatic nitration run into many tens of thousands. The purpose of this chapter is primarily to discuss the methods used for the synthesis of polynitroarylene explosives. Undoubtedly the most important and direct method for the synthesis of polynitroarylenes involves direct electrophilic nitration of the parent aromatic hydrocarbon. This work gives an overview of aromatic nitration but the discussion doesn t approach mechanistic studies in detail. Readers with more specialized interests in aromatic nitration are advised to consult several important works published in this area which give credit to this important reaction class.The use of polynitroarylenes as explosives and their detailed industrial synthesis has been expertly covered by Urbanski in Volumes 1 and 4 of Chemistry and Technology of Explosives ... 

The simplest hydrocarbon, methane, has posed a wealth of challenges to experimentalists and theoreticians seeking to discern its combustion mechanism. Methane s reactions have been explored in a wide variety of contexts over the past several decades. We have discussed these briefly the interested reader is referred to the reviews cited in our previous discussion for further details. Due to the scope of this review, we are primarily interested in these reactions insofar as they provide useful benchmarks for the reactions of larger alkylperoxy (RO2 ) and alkoxy (RO ) systems. With respect to the reactive intermediates present in methane combustion and their implications for larger systems, Lightfoot has published a review on the atmospheric role of these species, while Wallington et al. have provided multiple overviews of gas-phase peroxy radical chemistry. Lesclaux has provided multiple reviews of developments in peroxy radical chemistry. Batt published a review of the gas-phase decomposition reactions available to the alkoxy radicals. ... 

The six sections following the overview chapter deal with aspects of selective oxidation that range from theories and concepts to state-of-the-art engineering applications. Several chapters describe the synthesis, characterization, and performance of potentially attractive new catalytic materials. These catalysts range from single crystals with well-defined crystal faces to highly dispersed or amorphous solids. Most of the actual catalytic reactions studied involve the oxidation of hydrocarbons in the range from to C. ... 

Dewulf, J., and H. Van Langenhove, Analytical Techniques for the Determination and Measurement Data of 7 Chlorinated Cr and C2-Hydrocarbons and 6 Monocyclic Aromatic Hydrocarbons in Remote Air Masses An Overview, Atmos. Environ., 31, 3291-3307 (1997). 

---