Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Houses electricity

Injection-Molded Products. Numerous housings, electrical enclosures, and cabinets are injection-molded from rigid PVC. These take advantage of PVC s outstanding UL flammabiUty ratings and easy mol ding into thin-waHed parts. PVC has developed melt flow capabiUties to the point where it competes with essentially any other flame-retarded engineering thermoplastic and molds easier than most. [Pg.508]

Medical uses for Udel resin include surgical trays, nebulizers, flow controllers for blood, and respiration regulators. Transportation applications center around automotive fuse housings, electrical connectors, and switches. Electrical and electronic end uses include coil bobbins, housings, connectors, bushings, capacitor film, and business machine parts. EinaHy, water, heater dip tubes, milking machine parts, pollution control equipment, and some filtration membranes are made. [Pg.272]

Figure 21-13. Comparison of stress rupture life at 50ksi/1350°F (345 MPa/735°C) in service exposed, commercially reheat-treated, laboratory reheat-treated, and HIP reheat-treated used Inconel X-750 turbine blades. (Courtesy of Westing-house Electric Corp., Gas Turbine Div.)... Figure 21-13. Comparison of stress rupture life at 50ksi/1350°F (345 MPa/735°C) in service exposed, commercially reheat-treated, laboratory reheat-treated, and HIP reheat-treated used Inconel X-750 turbine blades. (Courtesy of Westing-house Electric Corp., Gas Turbine Div.)...
McCaskey, H.O. Jr., United States patent USP 4,123,579. Resin coated substrate using a short-set, high-flow melamine-formaldehyde impregnating resin. Assigned to Westing-house Electric Corp., 1978. [Pg.1098]

If air conditioning systems are designed for buildings housing electrical equipment, the heat generated by the electrical equipment must be considered when sizing the air conditioning equipment. Artificial heat is seldom required in all but the coldest of climates. [Pg.545]

The heaviest products obtained directly from oil arc lubricants, waxes, asphalt, and coke. These products have both domestic and industrial uses. Lubricants, for example, are applied in the operation and maintenance of industrial equipment and machinery. Asphalt, because it is not reactive to chemicals in the environment, is a superb material of construction in the building of roads and in roofing. It is also used in the waterproofing of concrete, the manufacture of black paints, and as a material lor tire threads, battery housing, electrical insulation, and other applications. The heaviest of all the petroleum products, coke, is used extensively as a major component of industrial electrodes and as a commercial fuel. [Pg.943]

Aronsen, Some Preparation Methods And Physical Characteristics of U02 Powders , Westing-house Electric Corp, Penn, WAPD-178, USAEC Contract AT-1 l-l-GEN-14 (1958) 23a) C.R. [Pg.447]

Typically, polyester resins are used for high-end applications that require excellent electrical and thermal resistance. When dimensional stability under load is more critical, glass fibers are incorporated to increase the heat distortion temperature and the stiffness of the part. Examples of glass fiber reinforced parts include electrical housings, electrical adapters, computer components, telephone housings, and light bulb sockets. When impact modified, polybutylene terephthalate can be injection molded to make car bumpers. [Pg.380]

Fig. 36. Site plan for the advanced pressurized water reactor (PWR). (Westing-house Electric Corporation, Energy Systems)... Fig. 36. Site plan for the advanced pressurized water reactor (PWR). (Westing-house Electric Corporation, Energy Systems)...
Numerous housings, electrical enclosures, and cabinets are injection-molded from rigid PVC. These take advantage of PVC s outstanding UL flammability ratings and easy molding into thin-walled parts. [Pg.1687]

Manufacturing-Thermoplastic Products Electrical Conduits, Fittings Controls Telecommunications Electronics Housings Electrical Wiring Home Security Product Distribution Wireless Device Distribution... [Pg.358]

The display site should be a large flat area. There must not be any house, electric wires, electric cars, railways, fuel tanks or other institutions which might cause fire. [Pg.313]

Use Packaging, refrigerator doors, air-conditioner cases, containers and molded household wares, machine housings, electrical equipment, toys, clock and radio cabinets. Foam Thermal insulations, light construction (as in boats, etc.), ice buckets, water coolers, fillers in shipping containers, furniture construction. Spheres Radiator leak stopper. [Pg.1019]

Use Power-tool housings, electrical equipment, extruded pipe and sheet, automotive components, electronic parts, appliances, computer components, base matrix for stereotype printing plates. [Pg.1019]

All counters have walls as thin as possible (or practical), but in addition, many commercial designs have an area on the surface of the counter designated as the window, consisting of a very thin material. In cylindrical counters, the window is usually the front end of the cylinder (the other end houses electrical connectors). There are some cylindrical counters with windows located on the cylindrical surface. [Pg.208]

Design description The transmitter is designed to operate at 2.5 Gb/sec with a NRZ data input format. The elements include housing, electrical interface, optical interface, drive circuitry, temperature control, optical sensors, data buffers, modulator, and attenuator. [Pg.1999]

Neal, R.A., 1962. Modes of Failure Analysis Summary for the Nerva B-2 Reactor. Westing-house Electric Corporation Astronuclear Laboratory. [Pg.132]

Loss of in-house electric power supply results in tripping of all pumps (for example MCPs, feedwater pumps and service water pumps) and of both turbogenerators. [Pg.45]

Control rooms housing electrical equipment should be pressurized with clean filtered air and entrances should preferably be fitted with two sets of interlocked doors to seal the factory environment, with only one operable door at a time. All electrical cabinets and consoles should be pressurized with fan units fitted with filters and due care should be taken to ensure that there is sufficient air available to remove excess heat from the cabinets. [Pg.424]

The market for commercial polymer blends has grown steadily over the past four decades. A recent estimate of the polymer alloy/blend market by volume for 2012 was about 2.2 billion pounds. The market was projected to grow to about 2.6 billion pounds by 2018 (BCC Research 2013). The principal markets for all blends include the automotive industry phone, computer, and other business machine housings electrical components such as connectors appliances consumer products recreational equipment and construction and industrial applications. [Pg.523]

Vertical openings may exist between wall surface materials. Vertical shafts may house electrical, communication and other building services. Laundry chutes, elevator shafts, ventilation shafts, or atriums are all examples of vertical openings. [Pg.231]


See other pages where Houses electricity is mentioned: [Pg.70]    [Pg.12]    [Pg.335]    [Pg.357]    [Pg.428]    [Pg.182]    [Pg.70]    [Pg.1689]    [Pg.32]    [Pg.461]    [Pg.168]    [Pg.510]    [Pg.12]    [Pg.178]    [Pg.398]    [Pg.1301]    [Pg.342]    [Pg.249]    [Pg.751]    [Pg.26]    [Pg.442]    [Pg.133]    [Pg.260]    [Pg.137]   
See also in sourсe #XX -- [ Pg.136 ]




SEARCH



Electrical housings

© 2024 chempedia.info