Gaine

Take the capital cost and spread it as a series of equal annual payments A made at the end of each year over n years. The first payment gains interest over (n — 1) years, and its future value after (n - 1) years is... 

The electrovalent bond is formed by electrostatic attraction between oppositely charged ions. Thus Na, with one outer electron, loses this electron to achieve the noble gas Ne structure, while Cl with seven outer electrons, gains one electron to achieve the Ar structure. 

For hydrocarbons, this gain remains moderate since their mass enthalpy of vaporization, between 300 and 500 kJ/kg, usually represents only 0.8% to 1% of the NHV. It is thus not extremely useful to know in this case whether the motor fuel is introduced as a vapor or a iiquid. The same is not true for... 

The properties of straight run diesel fuels depend on both nature of the crude oil and selected distillation range. Thus the paraffinic crudes give cuts of satisfactory cetane number but poorer cold characteristics the opposite will be observed with naphthenic or aromatic crudes. The increasing demand for diesel fuel could lead the refiner to increase the distillation end point, but that will result in a deterioration of the cloud point. It is generally accepted that a weight gain in yield of 0.5% could increase the cloud point by 1°C. The compromise between quantity and quality is particularly difficult to reconcile. 

New analytical methods. From this point of view, the development of instrument technology is emphasized that provides either gains in productivity or quality, or more advanced analyses. 

Since the 1960 s, two ideas have gained our attention the struggle against pollution before the first oil crisis of 1973 and the diminution of consumption since. One can consider, in fact, that the two objectives are linked. Indeed, any maladjustment of a fuel admission system will modify the equivalence ratio of the mix. The consequences are modifications, on one hand, of the consumption and on the other, of the nature and the quantity of pollutants emitted CO, NO, and unburned hydrocarbons. 

In relatively small doses (see Chapter 5), additives made it possible for the refiner to gain several points in octane number and thereby to allow the premium gasoline to meet specifications. 

In recent years a new approach to contracting has evolved and Is gaining rapid acceptance In the United Kingdom Continental Shelf (UKCS). The concept has become known as partnering and can be seen as a progression of the incentive contract. Whilst the previously described contractual arrangements are restricted to a single well project... 

To gain an understanding of the composition of the reservoir rock, inter-reservoir seals and the reservoir pore system it is desirable to obtain an undisturbed and continuous reservoir core sample. Cores are also used to establish physical rock properties by direct measurements in a laboratory. They allow description of the depositional environment, sedimentary features and the diagenetic history of the sequence. 

Horizontal wells were drilled as far back as the 1950s, but have gained great popularity in the last decade, as lower oil prices have forced companies to strive for technologies which reduce the cost of oil and gas recovery. Horizontal wells have potential advantage over vertical or deviated wells for three main reasons ... 

By plotting the cumulative resource weighting against time, the planned progress of the project can be illustrated, as shown in Figure 12.8. This type of plot Is often referred to as an S -Curve, as projects often need time to gain momentum and slow down towards completion (unlike the example shown). 

Whatever form of incremental development is considered, the benefits to the host facility should not be gained at the expense of reduced returns for the new project. Incremental and satellite projects can in many situations help to extend the production life of an old field or facilities, but care must be taken to ensure that the economics are transparent. 

Introduction and Commercial Application Eventually every field development will reach the end of its economic lifetime. If options for extending the field life have been exhausted, then decommissioning will be necessary. Decommissioning is the process which the operator of an oil or natural gas installations will plan, gain approval and implement the removal, disposal or re-use of an installation when it is no longer needed for its current purpose. 

These lab tests were done to gain a specific data base for such a brittle material compared to the normal steels used for the manufacturing of pressure equipments. In any case the application of AE was only possible due to the rapid development of the data processing and the new state-of-the-art equipment where this technique is built in.(3)... 

Beside all these safety reasons, we are able to test 2 or 3 drums at the same time and by some improvements of the application we are able to reduce the test-period down to 4 hours, which results in an also for the production sufficient number of tested drums during the short shut down periods. These increase the availability and the production output of a plant and result therefore in a gain of safety an economical competitiveness of the European industry. 

The results of over 1 year of continuous, on-line acoustic emission (AE) structural surveillance of high temperature / high pressure steam headers, gained on 2 M-scale 600MW supercritical multifuel ENEL power units in normal operation, are presented in the paper. The influence of background noise, the correlation between plant operating conditions (steady load, load variations, startup / shutdown transients) and AE activity and the diagnostic evaluation of recorded AE events are also discussed. 

The benefit of such a model is that better understanding of the wave propagation process may be gained. Also, it is possible to make controlled parameter studies in order to understand the influence of e.g. defect orientation, probe angle and frequency on the test results. Results may be presented as A-, B- or C-scans. 

Franklin defined charge as positive or negative in the way we understand the loss or gain of electrons by mechanically rubbing surfaces together. His definition still stands. 

Gain and phase are digitaly controlled and a very good linearity. 

The operation is quite simple One sets the frequency to the lowest value, adjusts the gain and phase to the desired sensitivity using a special calibration standard discussed below and performs a zero-compensation on a defect free zone of the standard. Now one is ready to test. As one slides the probe across the surface of an aluminum structure, a signal response will be indicative of the presence of corrosion or of the presence of a subsurface edge. 

Abstract An Eddy current method applying a High Temperature Superconductor ( HTS ) DC SQUID sensor operating at Uquid nitrogen temperature (77K) is presented. The method is developed for the detection of surface or surface near defects. We compare the performance of the SQUID system with the performance gained from a commercial Eddy current system, while using identical probes. The experimental data are obtained on defects in gas turbine blades. The advantage of planar conformable probes for the use with the SQUID is discussed. 

Cryogenics We use several types of evacuated stainless steel cryostats of about 1 htre capacity to provide the 77 K cooling with hquid nitrogen. The simplest, best valued and easiest to handle one is a ordinary thermos flask available from the supermarket (see fig.3). It is sufficient for a measurement period of more than 12 hours. A specially designed stainless steel vessel gains cooling periods of 30 hours. 

---