Free radicals disproportionation

For proteins and peptides having sulfydryl or mercaptal side chains, free radical disproportionation reactions such as the ones reported by... 

The net result of this sequence is loss of half the original cross-links concerned. Simple disulphides are readily oxidized by hydroperoxides to thiolsulphinates which undergo free radical disproportionation to disulphides and thiol-sulphonates ... 

Xylenol orange (XO) is a triphenyhnethane dye, which is used as an indicator. It is widely used in spectrophotometry for the determination of rare earths. Veber et al. (1979) studied the polarographic behavior of XO and showed that the carbonyl group in the molecule reduces via two steps. In the first step a free radical is formed and in the second step this free molecule is reduced. At high acidity the free radical disproportionates into XO and a final product, so the second wave disappears. At pH 4-5, the rate of disproportionation is very slow, hence we may obtain two separate waves of approximately equal height. 

Two mechanisms have been proposed for the Wurtz reaction (compare Section III,7) and for the Wurtz-Fittig reaction. According to one, sodium reacts with the alkyl halide to produce a sodium halide and a free radical, which subsequently undergoes coupling, disproportionation, etc. ... 

Inhibitors slow or stop polymerization by reacting with the initiator or the growing polymer chain. The free radical formed from an inhibitor must be sufficiently unreactive that it does not function as a chain-transfer agent and begin another growing chain. Benzoquinone is a typical free-radical chain inhibitor. The resonance-stabilized free radical usually dimerizes or disproportionates to produce inert products and end the chain process. 

Tlie formation of initiator radicals is not the only process that determines the concentration of free radicals in a polymerization system. Polymer propagation itself does not change the radical concentration it merely changes one radical to another. Termination steps also occur, however, and these remove radicals from the system. We shall discuss combination and disproportionation reactions as modes of termination. 

The free-radical polymerization of methacrylic monomers follows a classical chain mechanism in which the chain-propagation step entails the head-to-taH growth of the polymeric free radical by attack on the double bond of the monomer. Chain termination can occur by either combination or disproportionation, depending on the conditions of the process (36). 

Although primary and secondary alkyl hydroperoxides are attacked by free radicals, as in equations 8 and 9, such reactions are not chain scission reactions since the alkylperoxy radicals terminate by disproportionation without forming the new radicals needed to continue the chain (53). Overall decomposition rates are faster than the tme first-order rates if radical-induced decompositions are not suppressed. 

Another method for producing petoxycatboxyhc acids is by autoxidation of aldehydes (168). The reaction is a free-radical chain process, initiated by organic peroxides, uv irradiation, o2one, and various metal salts. It is terrninated by free-radical inhibitors (181,183). In certain cases, the petoxycatboxyhc acid forms an adduct with the aldehyde from which the petoxycatboxyhc acid can be hberated by heating or by acid hydrolysis. If the petoxycatboxyhc acid remains in contact with excess aldehyde, a redox disproportionation reaction occurs that forms a catboxyhc acid ... 

The minimum polydispersity index from a free-radical polymerization is 1.5 if termination is by combination, or 2.0 if chains ate terminated by disproportionation and/or transfer. Changes in concentrations and temperature during the reaction can lead to much greater polydispersities, however. These concepts of polymerization reaction engineering have been introduced in more detail elsewhere (6). 

Toluene, an aLkylben2ene, has the chemistry typical of each example of this type of compound. However, the typical aromatic ring or alkene reactions are affected by the presence of the other group as a substituent. Except for hydrogenation and oxidation, the most important reactions involve either electrophilic substitution in the aromatic ring or free-radical substitution on the methyl group. Addition reactions to the double bonds of the ring and disproportionation of two toluene molecules to yield one molecule of benzene and one molecule of xylene also occur. 

Most organic free radicals have very short lifetimes, but certain structural features enhance stability. Radicals without special stabilization rapidly dimerize or disproportionate. The usual disproportionation process for alkyl radicals involves transfer of a hydrogen from the carbon P to the radical site, leading to formation of an alkane and an alkene ... 

A few free radicals are indefinitely stable. Entries 1, 4, and 6 in Scheme 12.1 are examples. These molecules are just as stable under ordinary conditions of temperature and atmosphere as typical closed-shell molecules. Entry 2 is somewhat less stable to oxygen, although it can exist indefinitely in the absence of oxygen. The structures shown in entries 1, 2, and 4 all permit extensive delocalization of the unpaired electron into aromatic rings. These highly delocalized radicals show no tendency toward dimerization or disproportionation. Radicals that have long lifetimes and are resistant to dimerization or other routes for bimolecular self-annihilation are called stable free radicals. The term inert free radical has been suggested for species such as entry 4, which is unreactive under ordinary conditions and is thermally stable even at 300°C. ... 

Although these reactions are thus closely related to the acyl-alkyl diradical disproportionation to ketenes, the stereospecificity of (55) -> (56) and (57) -> (58) shows that these hydroxyketones cannot proceed through free radicals capable of rotating about single bonds prior to the intramolecular hydrogen... 

Any substance capable of reacting with free radicals to form products that do not reinitiate the oxidation reaction could be considered to function as free-radical traps. The quinones are known to scavenge alkyl free radicals. Many polynuclear hydrocarbons show activity as inhibitors of oxidation and are thought to function by trapping free radicals [25]. Addition of R to quinone or to a polynuclear compound on either the oxygen or nitrogen atoms produces adduct radicals that can undergo subsequent dimerization, disproportionation, or reaction with a second R to form stable products. 

Mino and Kaizerman [12] established that certain. ceric salts such as the nitrate and sulphate form very effective redox systems in the presence of organic reducing agents such as alcohols, thiols, glycols, aldehyde, and amines. Duke and coworkers [14,15] suggested the formation of an intermediate complex between the substrate and ceric ion, which subsequently is disproportionate to a free radical species. Evidence of complex formation between Ce(IV) and cellulose has been studied by several investigators [16-19]. Using alcohol the reaction can be written as follows ... 

In the period 1910-1950 many contributed to the development of free-radical polymerization.1 The basic mechanism as we know it today (Scheme 1.1), was laid out in the 1940s and 50s.7 9 The essential features of this mechanism are initiation and propagation steps, which involve radicals adding to the less substituted end of the double bond ("tail addition"), and a termination step, which involves disproportionation or combination between two growing chains. 

The most comprehensive simulation of a free radical polymerization process in a CSTR is that of Konopnicki and Kuester (15). For a mechanism which includes transfer to both monomer and solvent as well as termination by combination and disproportionation they examined the influence of non-isothermal operation, viscosity effects as well as induced sinuoidal and square-wave forcing functions on initiator feed and jacket temperature on the MWD of the polymer produced. 

Correlated or geminate radical pairs are produced in unimolecular decomposition processes (e.g. peroxide decomposition) or bimolecular reactions of reactive precursors (e.g., carbene abstraction reactions). Radical pairs formed by the random encounter of freely diffusing radicals are referred to as uncorrelated or encounter (P) pairs. Once formed, the radical pairs can either collapse, to give combination or disproportionation products, or diffuse apart into free radicals (doublet states). The free radicals escaping may then either form new radical pairs with other radicals or react with some diamagnetic scavenger... 

Chain reactions do not continue indefinitely, but in the nature of the reactivity of the free radical or ionic centre they are likely to react readily in ways that will destroy the reactivity. For example, in radical polymerisations two growing molecules may combine to extinguish both radical centres with formation of a chemical bond. Alternatively they may react in a disproportionation reaction to generate end groups in two molecules, one of which is unsaturated. Lastly, active centres may find other molecules to react with, such as solvent or impurity, and in this way the active centre is destroyed and the polymer molecule ceases to grow. 

Polymerisation does not continue until all of the monomer is used up because the free radicals involved are so reactive that they find a variety of ways of losing their radical activity. The two methods of termination in radical polymerisations are combination and disproportionation. The first of these occurs when two radical species react together to form a single bond and one reaction product as in Reaction 2.5. 

That this mechanism can take place under suitable conditions has been demonstrated by isotopic labeling and by other means. However, the formation of disproportionation and dimerization products does not always mean that the free-radical abstraction process takes place. In some cases these products arise in a different manner.We have seen that the product of the reaction between a carbene and a molecule may have excess energy (p. 247). Therefore it is possible for the substrate and the carbene to react by mechanism 1 (the direct-insertion process) and for the excess energy to cause the compound thus formed to cleave to free radicals. When this pathway is in operation, the free radicals are formed after the actual insertion reaction. 

Since no relatively stable free radical is present (such as 26 in 14-17), most of the product arises from dimerization and disproportionation. The addition of a small amount of nitrobenzene increases the yield of arylation product because the nitrobenzene is converted to diphenyl nitroxide, which abstracts the hydrogen from 1 and reduces the extent of side reactions. ... 

The free radicals combine to form a carbon-to-carbon bond and give a saturated polymer molecule with initiator fragments on both ends. Termination by disproportionation produces two polymer molecules, one of which will contain a double bond ... 

For example, photolysis of a suspension of an arylthallium ditrifluoro-acetate in benzene results in the formation of unsymmetrical biphenyls in high yield (80-90%) and in a high state of purity 152). The results are in full agreement with a free radical pathway which, as suggested above, is initiated by a photochemically induced homolysis of the aryl carbon-thallium bond. Capture of the resulting aryl radical by benzene would lead to the observed unsymmetrical biphenyl, while spontaneous disproportionation of the initially formed Tl(II) species to thallium(I) trifluoroacetate and trifluoroacetoxy radicals, followed by reaction of the latter with aryl radicals, accounts for the very small amounts of aryl trifluoroacetates formed as by-products. This route to unsymmetrical biphenyls thus complements the well-known Wolf and Kharasch procedure involving photolysis of aromatic iodides 171). Since the most versatile route to the latter compounds involves again the intermediacy of arylthallium ditrifluoroacetates (treatment with aqueous potassium iodide) 91), these latter compounds now occupy a central role in controlled biphenyl synthesis. 

---