Mechanisms chain

The reaction between hydrogen and chlorine is probably also of this type and many organic free radical reactions (e.g. the decomposition of ethanal) proceed via chain mechanisms. 

Bromine reacts with alkanes by a free radical chain mechanism analogous to that of chlorine There is an important difference between chlorination and brommation how ever Brommation is highly selective for substitution of tertiary hydrogens The spread m reactivity among pnmary secondary and tertiary hydrogens is greater than 10 ... 

The reaction proceeds by a free radical chain mechanism involving the following prop agation steps... 

In the above examples the size of the chain can be measured by considering the number of automobile collisions that result from the first accident, or the number of fission reactions which follow from the first neutron capture. When we think about the number of monomers that react as a result of a single initiation step, we are led directly to the degree of polymerization of the resulting molecule. In this way the chain mechanism and the properties of the polymer chains are directly related. 

In this chapter we deal exclusively with homopolymers. The important case of copolymers formed by the chain mechanism is taken up in the next chapter. The case of copolymerization offers an excellent framework for the comparison of chemical reactivities between different monomer molecules. Accordingly, we defer this topic until Chap. 7, although it is also pertinent to the differences in the homopolymerization reactions of different monomers. 

It might be noted that most (not all) alkenes are polymerizable by the chain mechanism involving free-radical intermediates, whereas the carbonyl group is generally not polymerized by the free-radical mechanism. Carbonyl groups and some carbon-carbon double bonds are polymerized by ionic mechanisms. Monomers display far more specificity where the ionic mechanism is involved than with the free-radical mechanism. For example, acrylamide will polymerize through an anionic intermediate but not a cationic one, A -vinyl pyrrolidones by cationic but not anionic intermediates, and halogenated olefins by neither ionic species. In all of these cases free-radical polymerization is possible. 

Photoinitiation is not as important as thermal initiation in the overall picture of free-radical chain-growth polymerization. The foregoing discussion reveals, however, that the contrast between the two modes of initiation does provide insight into and confirmation of various aspects of addition polymerization. The most important application of photoinitiated polymerization is in providing a third experimental relationship among the kinetic parameters of the chain mechanism. We shall consider this in the next section. 

In contrast, the ultrasonic irradiation of organic Hquids has been less studied. SusHck and co-workers estabHshed that virtually all organic Hquids wiU generate free radicals upon ultrasonic irradiation, as long as the total vapor pressure is low enough to allow effective bubble coUapse (49). The sonolysis of simple hydrocarbons (for example, alkanes) creates the same kinds of products associated with very high temperature pyrolysis (50). Most of these products (H2, CH4, and the smaller 1-alkenes) derive from a weU-understood radical chain mechanism. 

The free-radical polymerization of acrylic monomers follows a classical chain mechanism in which the chain-propagation step entails the head-to-tail growth of the polymeric free radical by attack on the double bond of the monomer. 

Thermal Oxidative Stability. ABS undergoes autoxidation and the kinetic features of the oxygen consumption reaction are consistent with an autocatalytic free-radical chain mechanism. Comparisons of the rate of oxidation of ABS with that of polybutadiene and styrene—acrylonitrile copolymer indicate that the polybutadiene component is significantly more sensitive to oxidation than the thermoplastic component (31—33). Oxidation of polybutadiene under these conditions results in embrittlement of the mbber because of cross-linking such embrittlement of the elastomer in ABS results in the loss of impact resistance. Studies have also indicated that oxidation causes detachment of the grafted styrene—acrylonitrile copolymer from the elastomer which contributes to impact deterioration (34). 

Aqueous Phase. In pure water, the decomposition of ozone at 20°C iavolves a complex radical chain mechanism, initiated by OH and propagated by O2 radical ions and HO radicals (25). O3 is a radical ion. 

This reaction proceeds through a chain mechanism. Free-radical additions to 1-butene, as in the case of HBr, RSH, and H2S to other olefins (19—21), can be expected to yield terminally substituted derivatives. Some polymerization reactions are also free-radical reactions. 

Chemical initiation generates organic radicals, usually by decomposition of a2o (11) or peroxide compounds (12), to form radicals which then react with chlorine to initiate the radical-chain chlorination reaction (see Initiators). Chlorination of methane yields all four possible chlorinated derivatives methyl chloride, methylene chloride, chloroform, and carbon tetrachloride (13). The reaction proceeds by a radical-chain mechanism, as shown in equations 1 through. Chain initiation... 

Addition Chlorination. Chlorination of olefins such as ethylene, by the addition of chlorine, is a commercially important process and can be carried out either as a catalytic vapor- or Hquid-phase process (16). The reaction is influenced by light, the walls of the reactor vessel, and inhibitors such as oxygen, and proceeds by a radical-chain mechanism. Ionic addition mechanisms can be maximized and accelerated by the use of a Lewis acid such as ferric chloride, aluminum chloride, antimony pentachloride, or cupric chloride. A typical commercial process for the preparation of 1,2-dichloroethane is the chlorination of ethylene at 40—50°C in the presence of ferric chloride (17). The introduction of 5% air to the chlorine feed prevents unwanted substitution chlorination of the 1,2-dichloroethane to generate by-product l,l,2-trichloroethane. The addition of chlorine to tetrachloroethylene using photochemical conditions has been investigated (18). This chlorination, which is strongly inhibited by oxygen, probably proceeds by a radical-chain mechanism as shown in equations 9—13. 

Pyrolysis. The pyrolysis of 1,1,1-trichloroethane at 325—425°C proceeds by a simultaneous unknolecular and radical-chain mechanism to yield... 

Physical properties of hexachloroethane are Hsted in Table 11. Hexachloroethane is thermally cracked in the gaseous phase at 400—500°C to give tetrachloroethylene, carbon tetrachloride, and chlorine (140). The thermal decomposition may occur by means of radical-chain mechanism involving -C,C1 -C1, or CCl radicals. The decomposition is inhibited by traces of nitric oxide. Powdered 2inc reacts violentiy with hexachloroethane in alcohoHc solutions to give the metal chloride and tetrachloroethylene aluminum gives a less violent reaction (141). Hexachloroethane is unreactive with aqueous alkali and acid at moderate temperatures. However, when heated with soHd caustic above 200°C or with alcohoHc alkaHs at 100°C, decomposition to oxaHc acid takes place. 

Reactions of 3-chloro-6-methoxypyridazine with ketone enolates in liquid ammonia exhibit characteristics consistent with a radical chain mechanism for substitution (8UOC294). 

The transiiions at - 123°C in the methyl butene and methyl pemene polymers have been ascribed to both side-chain and main-chain mechanisms. 

Free-radical chain inhibitors are of considerable economic importance. The term antioxidant is commonly appUed to inhibitors that retard the free-radical chain oxidations, termed autoxidations, that can cause relatively rapid deterioration of many commercial materials derived from organic molecules, including foodstuffs, petroleum products, and plastics. The chain mechanism for autoxidation of hydrocarbons is ... 

Important differences are seen when the reactions of the other halogens are compared to bromination. In the case of chlorination, although the same chain mechanism is operative as for bromination, there is a key difference in the greatly diminished selectivity of the chlorination. For example, the pri sec selectivity in 2,3-dimethylbutane for chlorination is 1 3.6 in typical solvents. Because of the greater reactivity of the chlorine atom, abstractions of primary, secondary, and tertiary hydrogens are all exothermic. As a result of this exothermicity, the stability of the product radical has less influence on the activation energy. In terms of Hammond s postulate (Section 4.4.2), the transition state would be expected to be more reactant-like. As an example of the low selectivity, ethylbenzene is chlorinated at both the methyl and the methylene positions, despite the much greater stability of the benzyl radical ... 

Radical substitution reactions by iodine are not practical because the abstraction of hydrogen from hydrocarbons by iodine is endothermic, even for stable radicals. The enthalpy of the overall reaction is also slightly endothermic. Thus, because of both the kinetic problem excluding a chain reaction and an unfavorable equilibrium constant for substitution, iodination cannot proceed by a radical-chain mechanism. 

Another reagent which effects chlorination by a radical mechanism is f-butyl hypochlorite. The hydrogen-abstracting species in the chain mechanism is the f-butoxy radical. 

The anti-Markownikoff addition of hydrogen bromide to alkenes was one of the earliest free-radical reactions to be put on a firm mechanistic basis. In the presence of a suitable initiator, such as a peroxide, a radical-chain mechanism becomes competitive with the ionic mechanism for addition of hydrogen bromide ... 

The addition of S—H compounds to alkenes by a radical-chain mechanism is a quite general and efficient reaction. The mechanism is analogous to that for hydrogen bromide addition. The energetics of both the hydrogen abstraction and addition steps are favorable. Entries 16 and 17 in Scheme 12.5 are examples. 

A chain mechanism is proposed for this reaction. The first step is oxidation of a carboxylate ion coordinated to Pb(IV), with formation of alkyl radical, carbon dioxide, and Pb(III). The alkyl radical then abstracts halogen from a Pb(IV) complex, generating a Pb(IIl) species that decomposes to Pb(II) and an alkyl radical. This alkyl radical can continue the chain process. The step involving abstraction of halide from a complex with a change in metal-ion oxidation state is a ligand-transfer type reaction. 

Kinetics of the reaction of p-nitrochlorobenzene with the sodium enolate of ethyl cyanoacetate are consistent with this mechanism. Also, radical scavengers have no effect on the reaction, contrary to what would be expected for a chain mechanism in which aryl radicals would need to encounter the enolate in a propagation step. The reactant, /i-nitrophenyl chloride, however, is one which might also react by the addition-elimination mechanism, and the postulated mechanism is essentially the stepwise electron-transfer version of this mechanism. The issue then becomes the question of whether the postulated radical pair is a distinct intermediate. 

The reactivities of the substrate and the nucleophilic reagent change vyhen fluorine atoms are introduced into their structures This perturbation becomes more impor tant when the number of atoms of this element increases A striking example is the reactivity of alkyl halides S l and mechanisms operate when few fluorine atoms are incorporated in the aliphatic chain, but perfluoroalkyl halides are usually resistant to these classical processes However, formal substitution at carbon can arise from other mecharasms For example nucleophilic attack at chlorine, bromine, or iodine (halogenophilic reaction, occurring either by a direct electron-pair transfer or by two successive one-electron transfers) gives carbanions These intermediates can then decompose to carbenes or olefins, which react further (see equations 15 and 47) Single-electron transfer (SET) from the nucleophile to the halide can produce intermediate radicals that react by an SrnI process (see equation 57) When these chain mechanisms can occur, they allow reactions that were previously unknown Perfluoroalkylation, which used to be very rare, can now be accomplished by new methods (see for example equations 48-56, 65-70, 79, 107-108, 110, 113-135, 138-141, and 145-146)... 

Condensation of dibromodifluoromethane or bromochlorodifluoromethane with potassium phenoxides usually needs an initiation by a thiol and occurs by an ionic chain mechanism [/5, 16 (equations 14 and 15)... 

The elementary steps (1) through (3) describe a free-radical chain mechanism for the reaction of an alkane with a halogen. 

---