Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Fourier Transform Infrared Spectroscopy Analysis

Fourier transform-infrared spectroscopy analysis of collected peaks used to confirm analyte identification. [Pg.1094]

The successful modification has been confirmed by X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy analysis. Additive manufactured PCL/silanized tricalcium phosphate scaffolds have been fabricated using a screw extrusion system. Testing mechanical properties have demonstrated that both... [Pg.146]

The heat treatment at 700 °C allowed the stabilization of the zirconia cubic phase, which is the phase of interest for application as electrolyte in solid oxide fuel cells, as indicated by x-ray diffraction analysis and confirmed by the Fourier transform infrared spectroscopy analysis. [Pg.156]

Fourier transform infrared spectroscopy) analysis, and this suggests that the C-Fl bond cleavage of aldehyde is the rate-limiting step for this transformation. A drawback of this transformation is the formation of inseparable regioisomers for /wet -substituted substrates [74]. [Pg.248]

Fourier Transform Infrared Spectroscopy Analysis A ThermoNicolet Nexus 470 spectrometer was used for FTIR analysis to detect the presence of functional groups in the membranes. Thin membrane samples were attached to a polyethylene substrate FTIR card from Thermo Electron Cotp. and analyzed at ambient temperature. All spectra were obtained from 100 scans at 4.0 cm resolution with spectra ranging from 400 to 4000 cm. ... [Pg.196]

J. R. Ferraro and K. Krishnan, eds.. Practical Fourier Transform Infrared Spectroscopy Industrial and Laboratoy Chemical Analysis, Academic Press, Inc., San Diego, Calif., 1990. [Pg.322]

P R Griffiths and J A de Haseth, Fourier Transform Infrared Spectroscopy — Chemical Analysis Series, Vol. 83, Wiley, Chichester, 1986... [Pg.814]

The structure of poly(iminocarbonates) synthesized by the direct interfacial polymerization of BPA and cyanogen bromide was analyzed by NMR, Fourier transform infrared spectroscopy and elemental analysis and found to be identical in all aspects to authentic poly(imino-carbonates) obtained by solution polymerization (46). [Pg.218]

Moreira, J.L. and Santos, L., Analysis of organic acids in wines by Fourier-transform infrared spectroscopy, Anal. Bioanal. Chem., 382, 421, 2005. [Pg.506]

H.W. Biermann, Time-resolved air monitoring using Fourier transform infrared spectroscopy, in Fumigants Environmental Fate, Exposure, and Analysis, ed. J.N. Seiber, J.A. Knuteson, J.E. Woodrow, N.L. Wolfe, M.V. Yates, and S.R. Yates, ACS Symposium Series No. 652, American Chemical Society, Washington, DC, pp. 202-211 (1997). [Pg.934]

Willis, J. N. and Wheeler, L., Use of a gel permeation chromatography-Fourier transform infrared spectroscopy interface for polymer analysis, in Chromatographic Characterization of Polymers, Hyphenated and Multidimensional Techniques, Provder, T., Barth, H. G., and Urban, M. W., Eds., American Chemical Society, Washington, D.C., 1995, chap. 19. [Pg.370]

Recently, nonliving biomass of S. cucullata has been described as a low-cost absorbent of Cr(VI).106 Optimum conditions for the Cr(VI) adsorption by acid-treated S. cucullata were found out using a full factorial design. The Cr(VI) removal efficiency of the adsorbent was found to increase with the increase in time, temperature, adsorbate concentration, and stirring speed, and to decrease with increase in pH and adsorbent dose. The Fourier transform infrared spectroscopy (FT-IR) analysis revealed that in addition to electrostatic force, the adsorption may be due to... [Pg.398]

In contrast, SIMCA uses principal components analysis to model object classes in the reduced number of dimensions. It calculates multidimensional boxes of varying size and shape to represent the class categories. Unknown samples are classified according to their Euclidean space proximity to the nearest multidimensional box. Kansiz et al. used both KNN and SIMCA for classification of cyanobacteria based on Fourier transform infrared spectroscopy (FTIR).44... [Pg.113]

McGovern, A. C. Ernill, R. Kara, B. V. Kell, D. B. Goodacre, R. Rapid analysis of the expression of heterologous proteins in Escherichia coli using pyrolysis mass spectrometry and Fourier transform infrared spectroscopy with chemometrics Application to a2- interferon production. J. Biotechnol. 1999, 72,157-167. [Pg.340]

Modern Fourier Transform Infrared Spectroscopy Chemical Test Methods of Analysis... [Pg.779]

V.A. Basiuk and J. Douda, Pyrolysis of poly glycine and poly 1 alanine analysis of less volatile products by gas chromatography/Fourier Transform infrared spectroscopy/mass spectrometry, J. Anal. Appl. Pyrol., 55, 235 236 (2000). [Pg.323]

Miniaturized chemical analysis systems have been developed for most macroscopic counterparts (Dittrich et al. 2006). The availability of optical fibers, light sources, and detectors in the visible UV and near-infrared (NIR) wavelengths makes it possible to integrate spectroscopic measurements in microreactors (Lobbecke et al. 2005). Fourier transform infrared spectroscopy (FTIR) is an efficient, broadly applicable... [Pg.68]

Prestrelski, S. J., Pikal, K., Arakawa, T. Optimization of lyophilization conditions for recombinant interleukin-2 by dried state conformational analysis using Fourier-transform infrared spectroscopy. Pharm. Res. 12 (9), p. 1250-1259, 1995... [Pg.237]

Johnson CT, Aochi YO. Fourier transform infrared spectroscopy. In Bartels JM (ed.), Methods of Soil analysis Part 3 Chemical Methods. Madison, WI Soil Science Society of America and Agronomy Society of America 1996, pp. 269-321. [Pg.318]

Gaboury, S. R. Urban, M. W. Analysis of Gas-Plasma-Modified Poly(Dimethylsiloxane) Elastomer Surfaces. Attenuated-Total-Reflectance-Fourier Transform Infrared Spectroscopy. In Structure-Property Relations in Polymers Urban, M. W., Graver, C. D., Eds. Advances in Chemistry Series 236 American Chemical Society Washington, DC, 1993 pp 777-790. [Pg.698]

The characterization of graphene often involves several techniques in conjunction in order to build up a complete picture of the material. The techniques typically include electron microscopy, Raman spectroscopy, X-ray photo-emission spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR) and thermal-gravimetric analysis (TGA). [Pg.33]

More sophisticated detection methods for gas chromatography are also employed in the analysis of hydrocarbons gas chromatography-mass spectrometry (EPA 8270C) and gas chromatography-Fourier transform infrared spectroscopy (EPA 8410). These procedures have a significant advantage in providing better characterization of the contaminants and thus are of particular use where some environmental modification of the hydrocarbons has taken place subsequent to soil deposition. [Pg.228]


See other pages where Fourier Transform Infrared Spectroscopy Analysis is mentioned: [Pg.642]    [Pg.211]    [Pg.112]    [Pg.642]    [Pg.211]    [Pg.112]    [Pg.140]    [Pg.555]    [Pg.353]    [Pg.745]    [Pg.602]    [Pg.194]    [Pg.236]    [Pg.381]    [Pg.136]    [Pg.610]    [Pg.218]    [Pg.391]    [Pg.138]    [Pg.164]    [Pg.340]    [Pg.89]    [Pg.89]    [Pg.383]    [Pg.55]   
See also in sourсe #XX -- [ Pg.112 ]




SEARCH



Analysis spectroscopy

Fourier analysis

Fourier spectroscopy

Fourier transform analysis

Fourier transform infrared

Fourier transform spectroscopy

Fourier transform spectroscopy infrared

Fourier transformation analysis

Infrared analysis

Infrared spectroscopy, fourier

Transformed infrared spectroscopy

© 2024 chempedia.info