Film format

Still another manifestation of mixed-film formation is the absorption of organic vapors by films. Stearic acid monolayers strongly absorb hexane up to a limiting ratio of 1 1 [272], and data reminiscent of adsorption isotherms for gases on solids are obtained, with the surface density of the monolayer constituting an added variable. 

It is known that even condensed films must have surface diffusional mobility Rideal and Tadayon [64] found that stearic acid films transferred from one surface to another by a process that seemed to involve surface diffusion to the occasional points of contact between the solids. Such transfer, of course, is observed in actual friction experiments in that an uncoated rider quickly acquires a layer of boundary lubricant from the surface over which it is passed [46]. However, there is little quantitative information available about actual surface diffusion coefficients. One value that may be relevant is that of Ross and Good [65] for butane on Spheron 6, which, for a monolayer, was about 5 x 10 cm /sec. If the average junction is about 10 cm in size, this would also be about the average distance that a film molecule would have to migrate, and the time required would be about 10 sec. This rate of Junctions passing each other corresponds to a sliding speed of 100 cm/sec so that the usual speeds of 0.01 cm/sec should not be too fast for pressurized film formation. See Ref. 62 for a study of another mechanism for surface mobility, that of evaporative hopping. 

The energetics and kinetics of film formation appear to be especially important when two or more solutes are present, since now the matter of monolayer penetration or complex formation enters the picture (see Section IV-7). Schul-man and co-workers [77, 78], in particular, noted that especially stable emulsions result when the adsorbed film of surfactant material forms strong penetration complexes with a species present in the oil phase. The stabilizing effect of such mixed films may lie in their slow desorption or elevated viscosity. The dynamic effects of surfactant transport have been investigated by Shah and coworkers [22] who show the correlation between micellar lifetime and droplet size. More stable micelles are unable to rapidly transport surfactant from the bulk to the surface, and hence they support emulsions containing larger droplets. 

Exerowa and co-workers [201] suggest that surfactant association initiates black film formation the growth of a black film is discussed theoretically by de Gennes [202]. A characteristic of thin films important for foam stability, their permeability to gas, has been studied in some depth by Platikanov and co-workers [203, 204]. A review of the stability and permeability of amphiphile films is available [205]. 

Daniel M F, Lettington O C and Small M 1983 Investigation into the Langmuir-Blodgett film formation ability of amphiphiles with oyano head groups Thin Solid Films 99 61-9... 

IHIN FILMS - FILM FORMATION TECHNIQUES] (Vol 23) pLOWTffiASURETffiNT] (Vol 11)... 

Film applications Film bases Film fabrication Film factors Film formation... 

---