Fabrication and Treatment

Fabrication and treatment methods to suit the finite environment... 

Electrically Conducting Fibers. FlectricaHy conducting fibers are useful in blends with fibers of other types to achieve antistatic properties in apparel fabrics and carpets. The process developed by Nippon Sanmo Dyeing Co., for example, is reportedly used by Asahi in Casbmilon 2.2 dtex (2 den) staple fibers. Courtaulds claims a flame-resistant electrically conductive fiber produced by reaction with guanadine and treatment with copper sulfide (97). 

Bis(azol-2-5l)stilbenes (2(i]ll such as (4) have been prepared. 4,4 -Dihydrazinostilbene-2,2 -disulfonic acid, obtained from the diamino compound, on treatment with 2 moles of oximinoacetophenone and subsequent ring closure, leads to the formation of (4) [23743-28 ]. Such compounds are used chiefly as washing powder additives for the brightening of cotton fabrics, and exhibit excellent light- and hypochlorite-stabiUty. 

Chemicals. Both organic and inorganic fluorine-containing compounds, most of which have highly speciali2ed and valuable properties, are produced from HF. Typically these fluorinated chemicals are relatively complex, sometimes difficult to manufacture, and of high value. These materials include products used as fabric and fiber treatments, herbicide and pharmaceutical intermediates, fluoroelastomers, and fluorinated inert Hquids. Other products include BF, SF, and fluoborates. 

The knitted fabric is subjected to a finishing operation in which a suitable backing material is appHed to penetrate the yam contact points and stabilize the stmcture. This process is usually accompanied by a heat treatment which stabilizes the fabric and conditions the pile. 

Introduced successfully for tires in 1967, glass fibers had properties that made them very attractive for use in tires (5,8). The britdeness of glass fibers, however, imposed some limitations on the final tine cord properties because of the requirement that each fiber be individually coated with a mbbery adhesive to avoid interfilament damage during fabrication and use. This additional treatment step is introduced at the fiber manufacturing stage. For several years fiber glass was used extensively in bias-belted and radial tires, but was ultimately replaced by steel belts in radial tires. 

Golorfastness to Heat Treatment. To test for fastness to dry heat, ISO 105-P01 the specimen is sandwiched between adjacent fabrics and placed under slight pressure between heated surfaces where the temperature of the surface is 150, 180, or 210°C for 30 s. The effect on the shade of the pattern and adjacents is then assessed. 

Subsection C This subsection contains requirements pertaining to classes of materials. Carbon and low-alloy steels are governed by Part UCS, nonferrous materials by Part UNF, high-alloy steels by Part UHA, and steels with tensile properties enhanced by heat treatment by Part UHT. Each of these parts includes tables of maximum allowable stress values for all code materials for a range of metal temperatures. These stress values include appropriate safety fac tors. Rules governing the apphcation, fabrication, and heat treatment of the vessels are included in each part. 

Equipment should be supported in such a way that it will not rest in pools of hquid or on damp insulating material. Porous insulation should be weatherproofed or otherwise protected from moisture and spills to avoid contact of the wet material with the equipment. Specifications should be sufficiently comprehensive to ensure that the desired composition or type of material will be used and the right condition of heat treatment and surface finish will be provided. Inspection during fabrication and prior to acceptance is desirable. 

Fabrication and Erection. Embrittlement problems associated with forming, welding and heat treatment are included in this section, although in some instances the heat treatment is done by the steel manufacturer. 

If, after fabrication, heat treatment is not possible, materials and fabrication methods must have optimum corrosion resistance in their as-fabricated form. Materials that are susceptible to stress corrosion cracking should not be employed in environments conducive to failure. Stress relieving alone does not always provide a reliable solution. 

The efficacy of ethylene oxide treatment depends upon achieving a suitable concentrahon in each article and this is assisted greatly by the good penetrating powers of the gas, which diffuses readily into many packaging materials ineluding mbber, plastics, fabric and paper. This is not without its drawbacks, however, since the level of... 

Nickel sulfate can be produced from either pure or impure sources. The pure source involves the reaction of pure nickel or nickel oxide powder (combined or separately) with sulfuric acid to produce nickel sulfate that is filtered and crystallized to produce a solid product. The impure raw material may be spent industrial liquor that contains a high percentage of nickel sulfate. The impurities in the liquor are precipitated by sequential treatment with oxidizers lime and sulfides can later be filtered out. The treated liquor, which is a pure solution of nickel sulfate, can be packaged in a drum or further crystallized and dried to produce solid nickel sulfate. Nickel sulfate is used mainly in the metal plating industries. Other uses include dyeing and printing of fabrics and production of patina, an alloy of zinc and brass. 

---